INSTALLATION
MANUAL
EZ-DC1 and EZ-DC2
Desktop Chassis
Model EZ-DC1
1/6 Rack width
Model EZ-DC2
1/3 Rack width
RDL EZ Series products provide the highest level of value to A/V professionals and A/V users who demand professional quality.
For long-term performance, quality and value, you have made the EZ choice. EZ products are made in the USA by RDL, the
inventor of application-specific modules bringing decades of experience as the world’s leading manufacturer of high-reliability
performance products to the A/V industry. Visit the RDL website for hundreds of professional A/V products made in the USA by RDL.
www.rdlnet.com
Decades of Performance, Quality and Value
RDL• 659 N. 6th Street • Prescott, AZ • USA 86301 • Sales: 800-281-2683 • 928-443-9391
Tech Support: 800-933-1780 • 928-778-3554 • RDL Europe Sales & Support: (31) 20-6238-983
EZ-DC1 and EZ-DC2
Desktop Chassis
•
Mounts 1/6 Width (EZ-DC1) or 1/3 Width (EZ-DC2) EZ Product to Desktop
•
Installs Quickly With Two Screws
•
Covers Cable Port in Desktop
•
Provides Space for Excess Wire
FEATURES OF EZ-DC MODELS
CHASSIS TOP VIEW
Features are common to both models.
UPPER OPENING
The top of the chassis is open to provide convenient
access for fastening the chassis to the desktop and
for pulling wires through the desktop.
BOTTOM WIRE INLET
The bottom of the chassis is open to provide a
large area for locating a clearance hole for wires to
pass through the desktop.
REAR WIRE INLET
The rear of the chassis is open to provide wiring
access to the back of the EZ product.
MOUNTING HOLES
These holes are used to mount a 5” (12.7 cm)
deep EZ product to an EZ-DC.
MOUNTING HOLES
These holes are used to mount a 3” (7.6 cm) deep EZ product to an EZ-DC.
www.rdlnet.com • • • www.rdlez.com
Loading...