ACCESSORIES
Models D-PSP1A, DB-PSP1A, DG-PSP1A, DS-PSP1A
Decora-Style Active Loudspeaker - Format-A
DG-PSP1A DB-PSP1A DS-PSP1A D-PSP1A
Shown with Matching RDL Cover Plates - Available Separately
Exceptional Audio Quality for Ultra-Compact Size
2 Watt RMS Audio Amplifier
Compressor/Limiter Prevents Clipping
Connects to Format-A Sender using Twisted-Pair Cable
Powered from RDL Twisted Pair Format-A Sender
The D SERIES-PSP1A is part of the group of versatile wall-mounted products from Radio Design Labs. The standard mounting case can be directly fastened in North
American electrical boxes or in RDL International wall boxes.
APPLICATION: The D SERIES-PSP1A is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis
mounts. It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The -PSP1A receives audio and 24 Vdc
power through a rear-panel RJ45 jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is amplified.
Amplification is provided by a high-efficiency Class D power stage with audio filtering tailored for crisp, pleasant audio clarity. The high-efficiency
Class D output stage produces negligible heat for all levels of expected voice or music modulation. The amplified output level is controlled by a
front-panel volume control. The -PSP1A includes an analog compressor/limiter that makes higher sound output levels possible without clipping.
The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full baffling in a tightly sealed rigid
structure. This produces sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band
frequencies to reduce distortion and increase peak power capability. Dispersion covers a spherical area of nearly 180 degrees with the speaker
mounted in a wall.
Models are available with grills in black (DB-PSP1A), white (D-PSP1A), gray (DG-PSP1A) or stainless steel (DS-PSP1A).
RDL 659 6th St. Prescott, AZ., USA 86301 (928) 443-9391 FAX (928) 443-9392 www.rdlnet.com
Front-Panel Gain Adjustment
Acoustically Optimized Decora Enclosure
Fidelity Comparable to Larger Drivers
Hemispherical Dispersion Mounted In Wall or Flat Surface
ACCESSORIES
Models D-PSP1A, DB-PSP1A, DG-PSP1A, DS-PSP1A
Decora-Style Active Loudspeaker - Format-A
Installation/Operation
EN55103-1 E1-E5; EN55103-2 E1-E4; EN60065
Typical Performance reflects product at publication tim e exclusive of EMC
data, if any, supplied with product. Specifications are subject to change
without notice. This product is Professional Apparatus.
Pair A: Audio +4 dBu
Pair B: Audio +4 dBu
Pair C: Audio +4 dBu
Pair D: Power +24 Vdc
TYPICAL PERFORMANCE
Input: RDL Format-A
Input Connection: RJ45
Format-A Signal Pair Used: Switch-selectable A, B, or C (Rear-panel)
Gain Adjustment: Single-turn audio taper (Front-panel)
Maximum SPL: 81 dB
Frequency Range: 150 Hz to 20 kHz, nominal
CMRR: > 80 dB (50 Hz to 120 Hz)
Power Requirement: 24 Vdc @ 55 mA (Idle); 100 mA (maximum), Ground-referenced
Ambient Operating Environment: 0° C to 40° C Maximum; 20° C Recommended
Dimensions: Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.05 in. 5.21 cm
RJ45 Standard wiring
Tab on bottom of connector
RJ45 conductor colors shown are for 568A standard.
The 568B standard may be used if the connectors at
both ends of the cable are wired identically.
(1) + White / Green
(2) – Green
(3) + White / Oran ge
(4) – Blue
(5) + White / Blue
(6) – Orange
(7) + White / Brown
(8) – Brown
Set switch to
determine
which of the
three
FORMAT-A
pairs is
amplified.
D SERIES - PSP1A
FORMAT A
TP CABLE
ACB
PAIR
REAR
Connect Twisted Pair Cable
directly to the output of a
FORMAT A SENDER.
FRONT
Adjust
gain for
the
desired
listening
level from
the
speaker.
891-5665
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287