RDL D-ECR1, D-ECR1L, DS-ECR1L, DS-ECR1 Datasheet

ACCESSORIES
Models D-ECR1 and DS-ECR1

Power On/Off Remote Control

• Remote System Power On/Off Control Panel

• Pushbutton Toggles Power On and Off/Standby

• LED Power Indicator Color Indicates Mode

• Blue LED: Active System Power

• Yellow LED: Standby (System Power Off)

• Red LED: Power Off and Auto Power-Up Disabled

• Flashing Red LED: Emergency Override

• Direct Control of Modules with RJ45 Power Control

• Connection to Controller Using Twisted-Pair Wiring

• Available in Standard RDL White (D-ECR1)

• Available in Stainless Steel (DS-ECR1)

Models D-ECR1L and DS-ECR1L

Power On/Off and Level Remote Control

• Remote System Power On/Off Control Panel

• Level Control Provides 0 to 10 Vdc at Controller

• Pushbutton Toggles Power On and Off/Standby

• LED Power Indicator Color Indicates Mode

• Blue LED: Active System Power

• Yellow LED: Standby (System Power Off)

• Red LED: Power Off and Auto Power-Up Disabled

• Flashing Red LED: Emergency Override

• Direct Control of Modules with RJ45 Power Control

• Connection to Controller Using Twisted-Pair Wiring

• Available in Standard RDL White (D-ECR1L)

• Available in Stainless Steel (DS-ECR1L)

The D/DS-ECR1 and D/DS-ECR1L are part of the group of versatile accessory products from Radio Design Labs. These modules combine
durable construction with high quality components and attractive, professional graphics. The D/DS-ECR1 and D/DS-ECR1L mount in separately
available electrical wall boxes and cover plates.

The D/DS-ECR1 and D/DS-ECR1L are wall-mounted remote controls providing A/V system power-up and power-down. These
controls directly interface with RDL products equipped with green coded RJ45 control jacks, such as the FP-ECC1 Energy
Conservation Controller. The D/DS-ECR1 provides a momentary pushbutton for power control and an LED power status indicator.
The indicator glows yellow when the associated system power is in the standby mode. Pressing the soft power button toggles the
system power on. The indicator glows blue when system power is on. Pressing the button when the power is on returns the
system power to standby. If the host controller is set to allow full power-down, holding the button for 3 seconds takes the system
out of standby and turns it off. The system remains off until the button is again pushed, placing the system in standby.

The D/DS-ECR1L includes the features of the D/DS-ECR1 plus a single-turn level control providing 0 to 10 V VCA linear control
voltage through the host controller. This control is normally used to adjust the master audio volume of an A/V system. Both remote
controls connect with their host controllers through twisted-pair cable terminated in RJ45 connectors.

The D-ECR1 and D-ECR1L feature a standard RDL white front panel. The DS-ECR1 and DS-ECR1L are offered in stainless steel
with custom lettering available. These finishes match other RDL remote selectors and jack plates for a visually appealing
installation of multiple controls.

RDL • 659 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

ACCESSORIES
Models D-ECR1 and DS-ECR1
Models D-ECR1L and DS-ECR1L

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

TYPICAL PERFORMANCE

Level Control
Power button: Momentary
Indicator: Red = Power Off; Yellow = Power Standby; Blue = Power On
Mounting: Mounts in standard US electrical box, RDL WB- or SMB- series boxes; cover plate available separately
Dimensions: Height: 4.1 in. 10.4 cm; Depth: 1.44 in. 3.7 cm (without knob); Depth: 2 in. 5 cm (with knob); Width: 1.7 in. 4.33 cm

891-5525

(D/DS-ECR1L):

0 to 10 Vdc at controller, linear, single-turn

Tab on bottom of connector

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

(1) White / Green, 0 to 10 V
(2) Green, Control (momentary)
(3) White / Orange, OFF LED
(4) Blue, ON LED
(5) White / Blue, 24 V (fused)
(6) Orange, Standby LED
(7) White / Brown, 10 V
(8) Brown, Circuit ground