
ACCESSORIES
Models D-CVMB2 and DS-CVMB2
Composite and Video Monitor BNC Panels
• Composite Video input on Phono Jack
• Video Monitor Input on Standard Video Connector
• Rear-Panel Video Outputs (R,G,B,H,V) on BNC Jacks
• BNC Jacks are Isolated from Chassis Ground
• Available in RDL White/Gray (D-CVMB2)
• Available in Stainless Steel (DS-CVMB2)
The D-CVMB2 and DS-CVMB2 are Decora®-compatible audio input accessories from Radio Design Labs. All metal enclosures
are attractively finished in white or brushed stainless steel to complement the decor encountered in commercial environments.
Custom labeling is available at www.rdlnet.com
.
DS-CVMB2
D-CVMB2
The D/S-CVMB2 is the ideal choice in installations requiring a wall-mounted video monitor and/or composite video
input or output plate for computers, monitors and projectors. The panel is typically installed as a video input plate, but
may equally be used as an output jack panel.
The front panel features a standard HD-15 video monitor connector and a composite video phono jack. Video
components, video sync and their respective ground returns are separated to feed five BNC jacks on the rear panel.
The BNC jacks are isolated from the module chassis ground so the appropriate signal grounds pass through without
adding a video ground loop at the panel. The front panel composite video jack is feed to a rear detachable terminal
block.
The D/S-CVMB2 is the ideal choice for providing convenient end-user computer inputs to feed monitors or projectors
in small facilities such as boardrooms or classrooms. Use it individually or in conjunction with other RDL products as
part of a complete audio/video system.
RDL • 659 N. 6th St. • Prescott, AZ., USA 86301 • (928) 443-9391 • FAX (928) 443-9392 • www.rdlnet.com

ACCESSORIES
Models D-CVMB2 and DS-CVMB2
Composite and Video Monitor BNC Panels
USER INPUT CONNECTIONS
Composite
Video
VIDEO
Installation/Operation
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.
Computer Video
INSTALLER CONNECTIONS
B
Video Signal to
Monitor or Projector
V
Note: BNC video jacks are insolated from the
chassis ground to prevent video ground loops.
The BNC connectors used to connect the
monitor or projector should not be allowed to
contact the metal mounting box, if used.
COMPOSITE
VIDEO
B
G
V
R
H
G
R
H
D/DS-CVMB2
Composite Video
TYPICAL PERFORMANCE
Video input connector (2): Female HD-15; Composite Video Phono Jack
Video output connectors (6): BNC (R: Red; G: Green; B: Blue; H: Horizontal Sync; V: Vertical Sync)
Composite Terminal Block
Dimensions: Height: 4.13 in. 10.49 cm
Width: 1.7 in. 4.32 cm
Depth: 1.4 in. 3.56 cm
Mounting Box Minimum Dimensions: Width: 1.80 in. 4.57 cm
Depth: 0.15 in. (0.38 cm)
plus the depth of the installer-provided BNC connectors
891-5505
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287