RDL AMS-RU4 Data Sheet

ACCESSORIES
Model AMS-RU4
Mounting panel for 4 AMS Accessories
The AMS-RU4 permits the mounting of up to four RDL AMS series accessories which include switches, controls, indicators and jacks. The use of AMS accessories allows for easy customization of rack mounted user interfaces. The design of the AMS-RU4 complements the appearance of adjacent RACK-UP products.
Front
Front
Rear
Rear
RDL 659 6th St. Prescott, AZ., USA 86301 (928) 443-9391 FAX (928) 443-9392 www.rdlnet.com
ACCESSORIES
Model AMS-RU4
Mounting panel for 4 AMS Accessories
Installation/Operation
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reects product at publication time exclusive of EMC data, if any, supplied with product. Specications are subject to change without notice.
STEP #1 Start the screws into the bottom of the AMS-RU4 but do not install them all the way.
STEP #3 Slide the unit forward until the screws are seated in the forward position of the cutout. Tighten the screws to secure the AMS-RU4 in the chassis.
STEP #2 Place the AMS-RU4 onto the chassis. The screw heads will pass through the rear position in the cutout.
891-3575
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Loading...