RDL AMS-HR6, HR-FP1 Quick Start Guide

HALF-RACK ACCESSORIES

Models HR-RA2 HR-FP1 AMS-HR6
Rack Adapter Filler Panel AMS Mounting Panel

HR-RA2 Rack Adapter

AMS-HR6 AMS Mounting Panel

RDL • 659 N. 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

HR-FP1 Filler Panel

HALF-RACK ACCESSORIES

Models HR-RA2 HR-FP1 AMS-HR6

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication
time exclusive of EMC data, if any, supplied with product.

Rack Adapter Filler Panel AMS Mounting Panel

HR-FP1 Filler Panel or
AMS-HR6 AMS Mounting Panel

Place the HR module or panel in the rack
adapter by passing the screw heads through
the forward holes of the chassis cutouts.

STEP 2

Start the screws provided with the HR

STEP 1

module or panel in the threaded bottom
holes; do not tighten.

HALF-RACK Module

TYPICAL PERFORMANCE

Construction: Steel
Finish: RDL Black texture
HR-RA2 Dimensions: 1RU 19” Rack mount
Height: 1.75 in 4.45 cm
Length: 19 in 48.2 cm
Depth: 4.3 in 10.92 cm
HR-FP1 and AMS-HR6 Dimensions: Height: 1.7 in 4.3 cm
Length: 8.6 in 20.6 cm
Depth: 1.16 in 2.95 cm

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

891-3270

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

Slide the HR module or panel

STEP 3

toward the rear of the rack
adapter until seated in position,
then tighten the screws.