RDL AMS-10KA Quick Start Guide

ACCESSORIES

AMS Accessories

Model AMS SYSTEM
Accessory Mounting System

ANYWHERE YOU NEED...

 Customized Input/Output Connectors
 Custom Panel in any RACK-UP® Mount
 Label Track for Customized Lettering
 Wide Range of Standard Jacks
 Momentary or Latching Switches
 LED Indication
 Front Panel Level Control
 Mounting in Rack or Tabletop Enclosures

AMS-UF1 RACK-UP Mounting Frame

You Need The AMS SYSTEM!

The AMS SYSTEM is a versatile product group from Radio Design Labs. The unique design allows the AMS frame
and associated accessories to mount into any standard RDL RACK-UP mounting opening. Optionally available RDL
RACK-UP style rack mount and countertop enclosures make AMS accessories useful in a wide variety of
installations.

APPLICATION: The AMS SYSTEM is comprised of a mounting frame and a variety of accessories that mount in the
frame. The accessories provides for a wide range of possible signal input/output connections, switching and control.

RMS-4 ULTRASTYLETM Wall-Mount Plate

The AMS-UF1 Universal Frame is equipped with a label track and four accessory ports. Each port accepts any AMS
accessory. Three AMS-FP1 blank Filler Plates are included with each AMS-UF1. These plates may be used to fill
unused accessory ports or may be used to mount installer-supplied parts. The label track is equipped with a
polycarbonate window. The installer can prepare a label strip to identify each of the accessory functions. Upon
installing the AMS-UF1, the label cannot be removed and altered by users.

The accessory ports in the frame are all identical. Therefore, the panel can mount any combination of jacks,
indicators and switches. Available accessories include:

AMS-XLF Female, 3 terminal XLR with solder terminals (for mic or line level audio signals)
AMS-XLM Male, 3 terminal XLR with solder terminals (for mic or line level audio signals)
AMS-1/4F Stereo ¼” Jack (for stereo headphones)
AMS-1RC Single Phono Jack (for mono unbalanced audio or video)
AMS-2RC Double Phono Jack (for stereo unbalanced audio)
AMS-BNC BNC Jack (for video)
AMS-SW2 Rocker Switch (DPDT to control RDL modules or other industry equipment), 2 Amp
AMS-PB1 Momentary Pushbutton (SPDT to control RDL modules or other industry equipment), 2 Amp
AMS-LED LED Indicator (Red LED including current limiting resistor and leads)
AMS-10K 10 KΩPotentiometer, knob and terminal block (Controls RDL and other industry VCAs)

AMS-10KA 10 KΩPotentiometer, knob and terminal block (Audio taper, attenuates unbalanced audio)
AMS-PJ1 Power Jack for 24 Vdc power (fits RDL power supplies equipped with jacks)
AMS-FP1 Filler Plate (covers unused accessory ports in the AMS-UF1)

Wherever installer customized jacks and controls are needed, the AMS SYSTEM is the ideal choice. Use the AMS
SYSTEM with available RDL mounting accessories and enclosures. Examples are: RDL RU-RA3 or RC-1U
rackmounts; RDL UC-1, UC-2 or WDG1 counter or tabletop enclosures. The AMS system is ideal for use with other
RDL modules and products to form a complete audio/video system.

RDL  659 N. 6th St.  Prescott, AZ., USA 86301  [phone] FAX [phone] www.rdlnet.com

ACCESSORIES

Radio Design Labs Technical Support Centers

Model AMS SYSTEM
Accessory Mounting System

Accessories

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4

EN55103-1 E1-E5; EN55103-2 E1-E4

Typical Performance reflects product at publication time

Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.

exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

Specifications are subject to change without notice.

Install any accessory in any of the four
positions in the AMS-UF1 mounting
plate or RMS-4 Wall Plate using two
mounting screws.

Install the mounting plate into any
RDL RACK-UP mounting panel or
enclosure or install RMS-4 in an RDL
WB-1U universal wall box or in a
standard single U.S. electrical box.

TYPICAL PERFORMANCE

AMS-UF1 Frame Dimensions: Height: 1.62 in. 4.12 cm
Label Strip Dimensions: Height: 0.40 in. 1.02 cm
Accessory Dimensions: Height: 1.02 in. 2.60 cm
AMS-UF1 Mounting: 6-32 Machine Screws (2 included)

Accessory Mounting: #6 Screws with combination spline/straight heads (included with accessories)
Finish: RDL Black

891-3155F

Remove label strip and add
customized lettering as desired.

Width: 5.72 in. 14.53 cm
Width: 5.70 in. 14.48 cm
Width: 1.22 in. 3.10 cm

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287