RDL AMS-10K Datasheet

ACCESSORIES

RDL • 659 6th St. • Prescott, AZ., USA 86301 • [phone] • FAX [phone] • www.rdlnet.com

Model AMS-10K

10K Linear Taper
Pot & Knob Assembly
Terminal block connections

y Mounts in D-Style Standard Cutouts
y Mounts in all AMS Mounting Frames
y Mounts in RDL Decora-Style Wall Plates
y Availability of a Wide Variety of Associated AMS Accessories
y Bezel Provides Professional Aesthetic Appearance
y Provides Flexibility for Connections and Controls

Mounted in a DB-D1

(Available Separately)

The AMS SYSTEM is a versatile product group from Radio Design Labs. The unique design allows the associated AMS accessories to mount into any standard RDL RACK-UP®
or HALF-RACK mounting opening as well as other RDL mounting accessories and enclosures. These optionally available RDL rack mount, wall mount and countertop enclosures
make the AMS SYSTEM accessories useful in a wide variety of installations.

APPLICATION: The AMS-10K is a user control intended to provide a linear dc control voltage to products equipped with a VCA to control

the audio level. It is designed to directly interface with the 0 to 10V 3-wire control input of the VCA. A single shielded pair is normally used.

The AMS-10K contains a long-life 10 kΩ potentiometer for adjusting the control voltage. A high quality terminal block is provided for external

connections. The AMS-10K mounts in AMS mounting frames and in standard D-style cutouts. The front plate and bracket are constructed
of black satin powder coated steel. A black plastic bezel is provided to finish the D-style cutout hole when the accessory is mounted. These
accessories are designed to mount behind the front panel of industry products that provide D-style cutouts.

.

ACCESSORIES

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

Model AMS-10K

10K Linear Taper
Pot & Knob Assembly

Installation/Operation

Declaration of Conformity available from rdlnet.com.

Sole EMC specications provided on product package.
Specications are subject to change without notice.

Terminal block connections

STEP #1
INSTALL THE BEZEL INTO THE MOUNTING HOLE AND
POSITION THE METAL PLATE OVER THE PEM STUDS.

STEP #2
SECURE THE AMS-10K ONTO THE PEM STUDS
WITH THE TWO NUTS INCLUDED WITH THE
AMS OR DECORA MOUNTING PLATE.

TYPICAL PERFORMANCE

Mounting: AMS mounts; D-Style cutouts
Depth (behind the panel): 1.00 in
Ambient Operating Environment: 0 to 70 degrees C

891-3173A

Front View
Standard D-Style Cutout Dimensions