7
Template for Wall Mounting Camera(s)///
-mounting Camera (s), drill three holes using a 1/4” drill bit and the
below. Insert supplied wall anchors into holes and secure Camera to
screws.
WIRELESS CAMERA SYSTEM
INCLUDES: VIDEO/AUDIO CAMERA TRANSMITTER & MONITOR/RECEIVER
CR3020 USER’S GUIDE
Congratulations on your purchase of the 900MHz Wireless Color Camera
system
an
watching the yard, pool, pets or the baby. It is also suited to small business
surveillance application.
.
FEATURES
• 900MHz wireless technology
• Color camera with night vision
• Both audio and video output
• Supports up to 2 cameras
• Manual or auto switching between cameras
• Adjustable cycle time between different channels
• AC power adaptor or battery operation
• Weatherproof construction( IP54 standard) for outdoor use
• WiFi interference free
. The system consists of a wireless A/V receiver and a wireless Camera,
ideal product for application of covert monitoring, such as the porch,
SYSTEM CONTENTS
• Wireless A/V receiver
• Wireless Camera with night vision
•Power adaptor
•Adaptor cable
•Hardware kit
•Manual
x1
x1
x2
x1
x1
x1
APPROVALS///
This device complies with part 15 of the FCC rules. Operation is subject to the
following
(1) this device may not cause harmful interference,
and,
(2) this
interference that may cause undesired operation.
FCC NOTE
The manufacturer is not responsible for any radio or TV interference caused by
authorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
two conditions:
device must accept any interference received, including
THINGS TO CONSIDER BEFORE INSTALLATION
For best performance, follow these simple guidelines:
• Camera(s) should be installed between 8 and 13 feet above the area to be
1
WARRANTY///
This product has a one year manufacturer’s warranty which covers parts and
labor only . In the Unlikely event that you encounter a problem, the unit should
be
returned to the place of purchase.
6
5
1. Make sure each camera (transmitter) is within
2
range, and that no large obstructions are blocking the
signal.
Interference on
camera picture
2. Try repositioning the camera, receiver or both to
improve the reception quality.
3. If a camera is positioned close to the receiver, point
antenna away from the receiver.
1. Ensure the volume is turned up sufficiently on the
TV.
2. Make sure the sound is within the microphone
Audio problems
range.
3. If the unit emits a loud wailing sound (feeds back),
try moving the camera away from the receiver or
angle the receiver differently.
SPECIFICATIONS
PAL or NTSC
360 horizontal TV Lines
48dB
-Speed Electronic Shutter 1/60 - 1/15,000 sec
1/3” CMOS
0.1 lux
150mA
2.36"L×1.69" Diameter
910MHz, 920MHz
FM
48dB
45dB
Metal Aluminum case, suited for indoor or
outdoor use
be aimed accordingly to optimize viewing area
obstructions between the Camera and Receiver
. Decide whether the Camera will be wall-mounted or sit on a desk/table top. If
the hardware kit in the package. The Camera can be
scenario by rotating the Camera to the required
DESK TOP WALL MOUNTING
. If using the 9V camera power adapter, just connect power jack. Make sure
positioned no more than 5 1/2 feet from an AC power outlet.
camera’s channel number can be set by user, screw the lens part of
ra to open the lens cover, and then could set the camera’s channel
The Camera (Transmitter) installation is now complete.
Vision///
ng up to 12 feet in the dark
used with the adapter. It can automatically turn to night vision in low light.
3
cable to the back of the receiver, the another end
4
(RCA cord) to your television's A/V inputs, the yellow plug to the VIDEO IN
jack and the white plug to the AUDIO IN jack.
9V DC power jack on the back of
the receiver and plug the power adapter into any
120 V/240
V power outlet.
. Place the receiver either on top or near to your TV. Rotate the antenna to a
assigned to them, set the DIP switches (located on the
panel of the receiver) for those corresponding channels to the OFF
(up). When you have selected a channel with an active camera, that
appear on your TV screen.
900MHz video signals pass easily through your home’s interior walls, but
by power wires or plumbing inside the wall. Usually
antenna will improve
-CAMERA OPERATION
ireless 900MHz Camera system is designed to work with up to 2
as. Additional Cameras are sold separately.
please check channel
make sure it is exclusive to each camera.
Accordingly
dip switch located on the back of the Receiver should be adjusted to reflect
support up to two different camera/transmitter signals. You
to the next either manually or automatically via
the top panel of the receiver.
MODE
two channels manually, press the MANUAL button on the
he receiver will switch to a different channel (CAM1, CAM2) each time when
button is pressed. To avoid searching channels that do not have
MODE
through the channels, press the
top panel of the receiver. The receiver will continuously
nels which are ON. To avoid searching channels that do
DIP switches for those
to the OFF position. The monitor will display the
from one camera to the next. The dwell time (time taken to switch
between 2-30
Each flash of the LED increases the dwell time by one second.
TROUBLE SHOOTING
If you are having trouble operating this product, please consult the guide
below:
SYMPTOM REMEDIES
1. Check all connectors. Make sure camera(s) and
receiver are switched ON.
No camera picture
2. Ensure camera(s) and receiver are set to correct
channel(s).
3. Make sure camera is within range of receiver.
1. Make sure receiver is switched ON.
Blank monitor
2. If using AC adapter, make sure it is plugged in.
Loading...