
Thanks for your purchasing of the 45236 Wireless Color Surveillance System. The 45236 kit is a
combined wireless color camera & video monitor/receiver. An ideal combination for watching the
baby, monitoring the porch, pets, yard or the pool. It is also suited to many small business
applications.
Features///
*900MHz wireless technology
*2.5-inch LCD for good picture display
*Plug and play installation
* Sound trigger function
*Supports up to 2 cameras
*Monitor can work with 3 modes: Scan, Auto & Manual
*Adjustable cycle time between cameras in Auto mode
*Camera can be wall or table mounting and the monitor can be tabletop mounting
*The LCD Brightness, Color, Contrast, Alarm volume & Audio volume are all
adjustable
System Contents///
Identify all parts before proceeding with installation.
Things to Consider Before Installation///
For best performance, follow these simple guidelines:
*The camera should be aimed accordingly to optimize viewing area.
*For best transmission, avoid installations where there are thick walls or major
obstructions between the camera & LCD monitor.
Installing the Camera(Transmitter)///
1.Unpack the Camera.
2.Decide whether the Camera will be wall-mounted or sit on a desk/tabletop. If wall
mounting, use drilling template on the back cover of these instructions. If using the
tabletop base, attach the camera to the stand as shown. The Camera can be adjusted
for either mounting scenario by rotating the Camera head to the required position.

3.To use the camera power adapter, connect power jack to the rear of the tabletop base.
Make sure the Camera is within reach of an AC power outlet.
4.Select the camera operating channel on the slide switch by moving slide switches to
1, 2channels’ position. Switch is preset to channel 1.
5. The Camera (Transmitter) installation is now complete.
Installing the LCD Monitor///
Main Operation
1.Plug AC power supplier of the LCD monitor into the power jack in the rear of the
LCD monitor base.
2.Turn on the LCD monitor by pressing the top POWER button.
3.The LCD monitor can be set on the tabletop.
Optimizing the Wireless Camera System///
The 900MHz signals pass easily through your home's interior walls, but the signal
may be reflected by power wires or plumbing inside the wall.
Multi-Camera Operation///
The Wireless Surveillance System is designed to work with up to two cameras.
Additional cameras and rechargeable lithium battery packs for camera are sold
separately.
Important
When using more than one camera, make sure each camera is assigned to a specific
channel by adjusting the corresponding slide switch.
Accordingly the DIP switch located on the back of the LCD monitor should be
adjusted to reflect the channel in use.