Congratulations on your purchase of the JASCO™ Wireless Camera
Wireless Camera)
All JASCO™ Wireless Cameras includes high quality video and
(45233
audio components. When combined with a JASCO™ Wireless Video
Monitor/Receiver
, you have an ideal combination for watching the baby,
monitoring the porch, pets, yard or the pool. It is also suited to many small
business applications.
FEATURES ///
1.900MHz wireless technology.
2.Plug’n’play installation.
3.High resolution color video camera.
4.Built-in microphone transmits sound from camera to monitor.
5.High quality audio and video components for long life.
6.IR LEDs for night vision.
7.Adjustable antenna on camera for better signal transition.
8.Rechargeable LI polymer Battery(not include, sold separately)
operation,850MAH battery can last for about 5 hours.
SYSTEM CONTENTS ///
Identify all parts before proceeding with installation.
THINGS TO CONSIDER BEFORE INSTALLATION ///
For best performance, follow these simple guidelines:
1.Camera(s) should be installed between 8 and 13 feet above the area to be
monitored
2.The Camera should be aimed accordingly to optimize viewing area
3.For best transmission, avoid installations where there are thick walls or major
obstructions between the Camera and Monitor
INSTALLING THE CAMERA (TRANSMITTER) ///
1.Unpack the Camera.
2.Place the Camera in an optimal position
3.To use the 9V camera power adapter, connect power jack to the input on the
base of the Camera. Make sure the Camera is positioned no more than 5 1/2 feet
from an AC power outlet
4.Desktop mounting
Just place the camera to where you want to, and make sure the camera is
within the RF range. As shown below:
5.Wall mounting
6.The Camera (Transmitter) installation is now complete.
NIGHTVISION ///
The camera includes IR LEDs, which allows viewing up to 5 feet in the dark when
used with the adapter. To turn on the IR LEDs, there is a small photoconductive
resistor on the front
of the Camera,which enable the camera automatically turn on
the IR LEDs on low light conditions.
MULTI-CAMERA OPERATION ///
The JASCO™
Wireless Camera System
is designed to work with up to (2)
Cameras. Additional Cameras are sold separately. IMPORTANT: When using
more than one Camera, make sure each Camera is assigned to a specific
channel by adjusting the corresponding slide switch left or right. The slide switch
is located at the underside of the camera housing.
TROUBLE SHOOTING
If you are having trouble operating this product, please consult the guide below:
SYMPTOM REMEDIES
1. Check all connectors. Make sure camera(s) and receiver are
No camera picture
Blank monitor
Interference on camera
picture
Audio problems
switched ON.
2. Ensure c am era (s) an d rec ei ve r a re set t o corr ec t c han nel (s ).
3. Make sure camera is within range of receiver.
1. Make sure receiver is switched ON.
2. If using AC adapter, make sure it is plugged in.
3. If using batteries, make sure they are installed correctly, or
try recharging(replacing) them.
1. Make sure each camera (transmitter) is within range, and
that no large obstructions are blocking the signal.
2. Try repositioning the camera, receiver or both to improve the
reception quality.
3. If a camera is positioned close to the receiver, point antenna
away from the receiver.
4. Reposition other nearby equipment transmitting on the
900MHz frequency.
1. Ensure the volume is turned up sufficiently on the Monitor
(or TV).
2. Make sure the sound is within the microphone range.
3. If the unit emits a loud wailing sound (feeds back), try
moving the camera away from the receiver or angle the
receiver differently.
SPECIFICATIONS
Camera
TV System
Integrated Lens
Resolution360 horizontal TV Lines
Signal/Noise Ratio46 dB
High-Speed Electronic Shutter1/60 - 1/15,000 sec
Image Sensor1/4” CMOS
Min. Illumination0.1 lux
Current Consumption 80~140mA
Overall Size
Frequency Range
PAL or NTSC
5.6mm, F2.0 fixed focus
2.35”W x2.74Hx3.16D
910 - 920 MHz
Modulation
Video Signal/Noise Ratio
Audio Signal/Noise Ratio
Channel Selection
Case Finish
APPROVALS ///
This device complies with part 15 of the FCC rules. Operation is subject to the
following
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may
two conditions:
cause undesired operation.
FM
46db
45db
Electronic tuning
UV resistant ABS plastic
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could v oid the
user's authority to operate the equipment.
CE: Need to test
FCC: Need to test
WARRANTY ///
This product has a one year manufacturer’s warranty which covers parts and
only. In the unlikely event that you encounter a technical or quality issue,
labor
please
contact JASCO at ***********
JASCO will replace defective units within the warranty period.
DRILLING TEMPRATE
If you decide to mount the camera on a wall,
use this page as a guide for drilling the required holes
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.