RDI Technology CA110 Users Manual

INDOOR/OUTDOOR

WIRELESS CAMERA SYSTEM

USINCLUDES: VIDEO/AUDIO CAMERA TRANSMITTER & MONITOR/USB RECEIVER

CR1122 USER’S GUIDE

Congratulations on your purchase of the 900MHz Wireless Color Bullet
MicroCam. The system consists of a wireless A/V&USB receiver and a wireless

MicroCam, an ideal product for application of covert monitoring, such as the porch,
watching the yard, pool, pets or the baby. It is also suited to many small business.
.

FEATURES

• 900MHz wireless technology

• Miniature color camera in bullet type with night vision

• Both audio and video output

• Supports up to 3 cameras

• Manual or auto switching between cameras

• Adjustable cycle time between different channels

• AC power adaptor or battery operation

• Camera can meet IP54 standard for outdoor use.

• USB power (no extra power needed)

• Real time recording

• Scheduled recording

• Instant image capture (BMP Format)

• Full screen playing

• Volume, audio, screen changeable and mute function

• Full-channel scanning function

• Record playback function (play VOB file, speed/back, mute, full screen, capture)

• Program information storing

• Single frequency scanning function

• Program character changeable (channel name, frequency, modulation mode,
bandwidth, PID)

• Time shift function

SYSTEM CONTENTS

• Wireless USB/A/V receiver x1

• Wireless MicroCam with night vision x1

• USB Driver(software CD) x1

• USB data cable x1

1

• Power adaptor x2

• Adaptor cable x1

• Hardware kit x1

• Manual x1

THINGS TO CONSIDER BEFORE INSTALLATION

For best performance, follow these simple guidelines:

• Camera(s) should be installed between 8 and 13 feet above the area to be
monitored

• The Camera should be aimed accordingly to optimize viewing area

• For best transmission, avoid installations where there are thick walls or major
obstructions between the Camera and Receiver

INSTALLING THE CAMERA (TRANSMITTER)

1. Unpack the Camera.

2. Decide whether the Camera will be wall-mounted or sit on a desk/table top. If

wall mounting, use the hardware kit in the package. The Camera can be adjusted
for either mounting scenario by rotating the Camera to the required position.

DESK TOP WALL MOUNTING

3. If using the 9V camera power adapter, just connect power jack. Make sure the

Camera is positioned no more than 5 1/2 feet from an AC power outlet.

4. Each camera’s channel number can be set by user, screw the lens part of

camera to open the lens cover, and then could set the camera’s channel number.

2