RD DS6600-15M, JDS6600-30M, JDS6600-50M, JDS6600-40M, JDS6600-60M Operating Manual
OPERATING MANUAL
JDS6600 Series
Digital Control Dual-channel
DDS Signal Generator
Rev1.0
MAY 2017
2
Contents
1.Inspecting Package Contents....................................................................
1
2.Summary...................................................................................................
2
2.1 Brief Introduction..........................................................................................................2
2.2 Model Introduction....................................................................................................... 2
2.3 Dimention......................................................................................................................
2
2.4 Technical parameters.....................................................................................................
3
3.Instrument Introduction............................................................................
6
3.1 Front Panel Introduction...............................................................................................
6
3.2 Rear Panel Introduction................................................................................................
6
3.3 Display Interface Introduction......................................................................................7
3.4 Button fuction Introduction.......................................................................................... 7
4.Operation Introduction.............................................................................
8
4.1 Introduction of Main Interface......................................................................................
8
4.2 Introduction of Measurement Mode Interface..............................................................
8
4.3 Introduction ofModulation Mode Interface..................................................................
8
4.4 Introduction ofSystem Setting Interface.......................................................................9
1
1.Inspecting Package Contents
When you get a new JDS6600 series dual channel DDS signal generator, please inspect device as follows:
1.1 Inspect the shipping container for damage.
If there are damages in the container or foam, keep them until the whole machine and the accessories passing
the electrical and mechanical tests. If your instrument has damaged during shipping, please contact your seller and
us for compensation.
1.2 Check the Accessories
All contents are as follows, if there is missing, damage or wrong, please contact us or reseller.
Host：JDS6600
1pcs
Accessories：DC adapter
1pcs
USB cable
1pcs
Signal output cable
2pcs
User manual (PDF)
1pcs
CD
1pcs
1.3 Check the instrument
In case of any mechanical damage or defect, or if the instrument does not operate properly or pass the electrical
and mechanical tests, you can contact us or reseller.
2
2. Summary
2.1 Brief Introduction
JDS6600 series DDS signal generator can generate sine wave, square wave, triangle wave, pulse wave, and
arbitrary wave etc. The frequence will be upto 60MHz. And it has duty-cycle correction, amplitude modulation
function and frequency sweep function, etc. It can show output signal, amplitude and frequency in the same time.
This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be
applied in factories, schools, research institutes and laboratories.
2.2、Model Introduction
There are 5 models, JDS6600-60M,JDS6600-50M,MJDS6600-40M, JDS6600-30M and JDS6600-15M. The
main difference is the max output frequency of sin wave, as follows:
Model
The max output frequency of sin wave
JDS6600-60M
60MHz
JDS6600-50M
50MHz
JDS6600-40M
40MHz
JDS6600-30M
30MHz
JDS6600-15M
15MHz
2.3
Note：Unit mm
Loading...