RCS RCS-433MDT2 User Manual

RCS-433MDT2

USER

MANUAL

Thank you for choosing a RCS transmitter. It is recommended

that you read this manual carefully before using the transmitter.

CONTENTS

1 - TRANSMITTER INTRODUCTION

1A - General Information
1B - Technical Specifications
1C - Main Features
1D - Model Types

2 - CODING
3 - MEMORIZATION
4 - BATTERY AND DIP-SWITCH ACCESS
5 - TROUBLESHOOTING

1 - TRANSMITTER INTRODUCTION

1A - General Information

• The radio control, RCS-433MDT2 has been designed for the
control of automatic closing systems and anti-burglar systems.
The operating frequency is 433,92 MHz.

• The receiver can be used to control automatic gates, rolling
shutters, awnings, anti-burglar appliances, lighting etc.

• The transmitter security code is obtained by means of a
9 way three-state dip-switch, which allows up to 19683 codes
combinations. All the receivers can store up to 50 different
dip-switch code combinations.

• Each transmitter (or its different keys) can be stored into
different receivers and hence can do more functions.

• In order to use the unused keys of the transmitter connect the
dedicated receiver to the mechanism to drive (i.e. electro lock
of a pedestrian gate, a buzzer, etc. ).

• The product fully complies with Part 15 of FCC Regulations.

1B - Technical specifications

Number of keys: . . . . . . . . . . . . . . . . . . . . . . . . . .2

Battery duration: . . . . . . . . . . . . . . . . . .12 - 24 months

Battery type: . . . . . . . . . . . . . . . . . . . . . . . .23A (L1028)

Current consumption: . . . . . . . . . . . . . . . . . . . . .25 mA

Operating frequency: . . . . . . . . . . . . . . . . .433.92 MHz

Security code combinations number: . . . . . . . . .19683

Modulation: . . . . . . . . . . . . . . . . . . . . . . . . . . .AM/ASK

E.r.p.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 - 100 uW

Range in open space: . . . . . . . . . . .from 100 to 200 m

Operating temperature: . . . . . . .from -10 °C to +55 °C

Dimensions: . . . . . . . . . . . . . . . . . . . . .1.75 x 1 x .3 in.

Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7 oz.

1C - Main Features

1D - Model Types

2 button dip-switch transmitter: Model #: RCS-433MDT2

2 - CODING

Slide open the door to access to the battery and the dip-switches.
The dip-position will give the security code.

Warning: Each transmitter is set-in-factory with the same code on
the dip-switches; it highly advisable to change this code by moving
the dip-switches to any random position ( “+”, “0” , “-”).

3 - MEMORIZATION

Each dip-switch setting code has to be stored into the receiver
memory. The memorization can be done by self-learning. The
instructions for this operation is given on the receiver installation
manual. Your own installer will perform this operation during
the installation or will give you the necessary explanation
during installation.

4 - BATTERY AND DIP-SWITCH ACCESS

To access the battery, slide the battery
door down. Place the 23A alkaline
battery between the 2 contacts.
Respect the right polarity as indicated
on the bottom of the box.

NOTE: Please dispose of the batteries
correctly, they are hazardous waste.

5 - TROUBLESHOOTING

FAULT SOLUTION

The radio signal is not verifiable Replace the transmitter battery

The transmitter led doesn't switch on Replace the transmitter battery

The radio signal is not verifiable Check the power supply of

the receiver

The transmitter led switches on Replace the transmitter battery

GUARANTEE

The guarantee period of all RCS transmitters is 12 months,

beginning from the manufacturer date. During this period,

if the product does not work correctly, due to a defective

component, the product will be repaired or substituted

at the discretion of RCS. The guarantee does not cover

the plastic container integrity. After-sale service is supplied

at the producer's factory.

REMOTE CONTROL SOLUTIONS, LLC

1-866-770-0727

www.rcsremotes.com

FCC ID: ____________

This device complies with FCC Rules Part 15 Operation

is subject to the following two conditions:

1) This device may not cause harmful interferences;

2) this device must accept interference that may cause undesired operation.

Notice: Any changes or modification to RCS equipment not
expressly approved by RCS could void the user's authority to
operate the equipment.

Battery Door

Button
Channel B

Red LED

Button

Channel A

Red LED

Battery

Door

Dip-Switch

Battery