UP 2162
POWER AMPLIFIER
DESCRIPTION
UP 2162 is a device with 2 separated and
independent 160 W amplifiers, each having 2
audio inputs, of which one with priority
function through a closing contact. Both the
audio inputs are at ‘line’ level: for preamplified signals or music sources (e.g. CD
players, tuners, etc.).The amplifier output is
available either for low impedance
loudspeakers (min. 4 O) or 100 – 70 V
constant voltage line (for loudspeakers
having 100 – 70 V transformers). The
amplifier is Class D with switching power
supply; the overall weight is extremely
reduced plus it offers a wide audio bandwidth
quality.
FEATURES
• Power Amplifier designed for the transmission of announcements and / or musical programmes
• Main input on removable connector
• AUX Input for music sources removable connector
• Controls for treble, bass and Gain on the AUX Input
• Main Input can have priority over the Aux Input (by means of an external command linked to the
removable connector)
• Output speaker available either for low impedance loudspeakers (min. 4 O) or 100 – 70 V constant
voltage line
• Front panel LEDs indicate the device state (ON, PROT), the priority activation (PRIOR) and the
signal/peak level (SIG/PK)
DATASHEET
TECHNICAL SPECIFICATIONS
Amplifier specifications
Number of channels:
2
Power output per channel (@ 4 ohm):
160 W RMS
Power output (@ 100 V):
160 W RMS
Frequency Response (-3dB):
50 Hz ÷ 16 kHz
Signal/noise rate (”A” weighted)
>80 dB
Distortion (THD+N) @ 1 kHz nominal
power:
<0.3 %
Input section
Total number of inputs:
4
Balanced:
4
Mono:
2
Stereo:
2
Line inputs:
4
Line connectors:
Euroblock
General Purpose Inputs (GPI):
4
Output section
Power output connectors:
Euroblock
Processing
Tone controls:
Yes
Controls
Configuration:
Front panel
Priority:
Yes
Protections
Cooling:
Convection
Short circuit:
Yes
Thermal:
Yes
DC:
Yes
Fuses:
Yes
Power requirement
Operating voltage:
220-240/115 V~ 50/60Hz
Voltage selection:
Internal
Power consumption:
700 W
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
Metal
Color:
Black
Rack mounting:
19", 2U
Size
Height:
88 mm / 3.46 inches
Width:
442 mm / 17.4 inches
Depth:
230 mm / 9.06 inches
Weight:
7.22 kg / 15.92 lbs
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.
Shipping informations
Package Height:
200 mm / 7.87 inches
Package Width:
330 mm / 12.99 inches
Package Depth:
500 mm / 19.69 inches
Package Weight:
8.7 kg / 19.18 lbs
PART NUMBER
• 12135065
UP 2162
EAN 8024530006587
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.
442 mm
88 mm
230 mm
RCF SpA
Via Raffaello Sanzio, 13
42124 REGGIO EMILIA
ITALY
Front panel
DRAWINGS
PANELS
Rear panel
DATASHEET
Loading...