RCF UP-2082 Data Sheet
UP 2082
POWER AMPLIFIER
DESCRIPTION
UP 2082 is a device with 2 separated and
independent 80 W amplifiers, each having 2
audio inputs, of which one with priority
function through a closing contact. Both the
audio inputs are at ‘line’ level: for preamplified signals or music sources (e.g. CD
players, tuners, etc.).The amplifier output is
available either for low impedance
loudspeakers (min. 4 O) or 100 – 70 V
constant voltage line (for loudspeakers
having 100 – 70 V transformers). The
amplifier is Class D with switching power
supply; the overall weight is extremely
reduced plus it offers a wide audio bandwidth
quality.
FEATURES
• Power Amplifier designed for the transmission of announcements and / or musical programmes
• Main input on removable connector
• AUX Input for music sources removable connector
• Controls for treble, bass and Gain on the AUX Input
• Main Input can have priority over the Aux Input (by means of an external command linked to the
removable connector)
• Output speaker available either for low impedance loudspeakers (min. 4 O) or 100 – 70 V constant
voltage line
• Front panel LEDs indicate the device state (ON, PROT), the priority activation (PRIOR) and the
signal/peak level (SIG/PK)
DATASHEET
TECHNICAL SPECIFICATIONS
Amplifier specifications
Number of channels:
2
Power output per channel (@ 4 ohm):
80 W RMS
Power output (@ 100 V):
80 W RMS
Frequency Response (-3dB):
50 Hz ÷ 16 kHz
Signal/noise rate (”A” weighted)
>80 dB
Distortion (THD+N) @ 1 kHz nominal
power:
<0.3 %
Input section
Total number of inputs:
4
Balanced:
4
Mono:
2
Stereo:
2
Line inputs:
4
Line connectors:
Euroblock
General Purpose Inputs (GPI):
4
Output section
Power output connectors:
Euroblock
Processing
Tone controls:
Yes
Controls
Configuration:
Front panel
Priority:
Yes
Protections
Cooling:
Convection
Short circuit:
Yes
Thermal:
Yes
DC:
Yes
Fuses:
Yes
Power requirement
Operating voltage:
220-240/115 V~ 50/60Hz
Voltage selection:
Internal
Power consumption:
320 W
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
Metal
Color:
Black
Rack mounting:
19", 2U
Size
Height:
88 mm / 3.46 inches
Width:
442 mm / 17.4 inches
Depth:
230 mm / 9.06 inches
Weight:
5.22 kg / 11.51 lbs
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.
Loading...