
The RDNet Control 8 is a real-time monitor
and control system able to manage up to 256
devices linked in a bus or up to 128 devices in
a ring topology. All the data collected from
the slaves are delivered to the sound engineer
by USB in a local installation or by Ethernet
from remote locations. The interface can be
directly connected to the DSP on board of
every TT+ line array module through the
exclusive RDNet protocol making it possible
to address in single cabinets or groups,
specific presets or modification parameters in
real-time. The key point of RDNet Control 8,
in fact, is to ensure minimum refresh time (at
least 5 per second) of all the system data
performance, for example: RMS signals,
compressor activity, temperature, fans speed,
warnings, etc. Data transfer can be routed
also through the provided xlr connectors
enabling the control of the system on
traditional multi-cored cables.
• ETHERNET (REMOTE CONTROL) AND USB (DIRECT CONTROL) PC CONNECTION TO RDNET
• CONTROL UP TO 8 SUB-NETS OF UP TO 32 SLAVE DEVICES
• ALL DEVICES ARE CYCLICALLY SCANNED ("POLLING") 10 TIMES A SECOND
• AUTO DETECT DEVICE PLACEMENT
• Controlling slave devices status and functions
• Monitoring and displaying faults and warnings sent from slave devices
• Storing subnet user filters configuration in a removable memory card
DATASHEET
Rev. G

Max number of devices (for each subnet)
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.