RCF MQ60H Specifications
the rules of sound
MONITOR SPEAKER
MQ 60H
Monitor speaker for installation at constant directivity
The MQ60H is a wall mount monitor speaker designed to guarantee uniform coverage
of a large area in order to limit the number of speakers and therefore the installation
points.
It is a two-way speaker with three transducers: the 5“ woofer and the two hornloaded dome tweeters with constant directivity are positioned in such a way as to
ensure the maximum listening comfort within the area covered.
Installation is carried out in two phases: fi rst, you mount the support on the wall and
make the electrical connections; when all the works are completed, you insert the
speaker and make a quick connection.
The speaker can be connected to constant voltage audio lines at 70 V or 100 V or to
constant impedance lines (rotary switch positioned to 16 Ohm).
Applications
• Foreground/Background Music
• Distributed Speech Reinforcement
• AV Production/Playback
• Near-fi eld Monitoring
Features
• 5” PP cone woofer
• 2 x 1” dome tweeter
• Built-in, multi-tap transformer
• 16Ω low impedance connection facility
• Built-in, LICC crossover with dynamic protection
• High density polystyrene HB grade UV stabilized
• Unobtrusive slide-in wall mounting accessory
• Fast plug-in eletrical connector
SYSTEM
Freq. Range (–10 dB): 100– 19.000 Hz
Freq. Response (–3 dB): 120°÷15.000 Hz
Horz. Coverage Angle (–6 dB): 120°
Vert. Coverage Angle (–6 dB): 180° asimmetrical
Directivity Factor; Q (DI): 4.7 (6.2)
System Sensitivity
Rated Maximum SPL: 107 dB
System Nominal Impedance: 16 Ω (bypassed)
System Input Power Rating
Recommended Amplifi er
Constant Voltage: 70.7V, 100V and Bypass
Power Taps: 5W, 10W, 20W, 30W [100V]
1
: 88 dB, 1W @ 1m
2:
3:
60 W ICE, 120 W PEAK
60 W
2,5W, 5W,10W, 15W [70,7V]
TRANSDUCERS
Low-Frequency: 5" (127mm)
High-Frequency: 2X 1” (25mm)
PHYSICAL
Enclosure: high density polystyrene
Grille: Matching perforated steel grille
Input Connectors: Bipolar Euroblock
Dimensions (HxWxD): 11.69”x7.79”x4.92” (297x198x125 mm)
Net Weight: 6.1 lb. (2.8 kg)
1
Measured on axis in the far fi eld with 1 watt (2.00 V RMS, 4) input and referenced to 1 meter distance using the
inverse square law. Listed sound pressure represents an average from 300Hz to 3kHz.
2
IEC Spectrum, Peak for 2 hours with +4.5 dB crest factor.
3
Recommended Amplifi er is a power capability value that should be taken as a guide.
110
Response 1W/1m
316
Impedance
100
90
dB SPL
80
70
60
20
100 1000 10000
Frequency (Hz)
360
330
300
270
240
210
180
Beamwidth vs. Frequency
Horizontal Beamwidth (1/3 Octave)
Vertical Beamwidth (1/3 Octave)
150
120
90
60
Coverage Angle (Deg.)
30
0
100 1000 10000
Frequency (Hz)
100
Ohms
10
1
100
10
Total Q
1
100 1000 10000
100 1000 10000
Frequency (Hz)
Directivity Index and Q
Frequency (Hz)
20
18
16
14
12
10
8
6
4
2
0
Loading...