M 1001
TWO-WAY PASSIVE SPEAKER
DESCRIPTION
M1001 is a multipurpose two-way full-range
speaker system, suitable in a wide range of
installations. The compactness, together with
the elegant and neutral design with accurate
finishing make M1001 suitable for almost any
environment and architectural constraint.
Available mounting accessories allow you to
use the M1001 wall or ceiling mounted, with
reference to the several possible applications.
The M1001 has a controlled dispersion and
delivers undistorted SPL value above any
expectation from such a compact speaker
system.
The M1001 features high sensitivity thanks to
the use of oversized magnets and a
comfortable sound quality with smooth and
wide frequency response performed thanks
to the Kapton diaphragm compression driver
loaded on a constant directivity horn. The
LICC crossover design includes an electronic
protection on high frequency device.
FEATURES
• High Quality 2-way passive loudspeaker
• 1 x 10" woofer, vented
• 1 x 1" driver, on 90°x60° CD horn
• High Power Handling ‘Low Impedance Compensated Crossover', with electronic protection for the
driver
• 300W AES power handling
• Rotatable RCF front logo
• Installation points are available on the rear panel, top and bottom
• All models have a 4-pin EUROBLOCK connector (audio input and parallel link output)
• Steel Front Grille with robust double mesh polyester clothing
DATASHEET
TECHNICAL SPECIFICATIONS
Acoustical specifications
Frequency Response (-10dB):
60 Hz ÷ 20000 Hz
Max SPL @ 1m:
128 dB
Horizontal coverage angle:
90°
Vertical coverage angle:
70°
Directivity index Q:
10
System Sensitivity:
97 dB
Power section
Nominal Impedance (ohm):
8 ohm
Power Handling:
300 W RMS
Peak Power Handling:
1200 W PEAK
Recommended Amplifier:
600 W
Protections:
Dynamic active mosfet
Crossover Frequencies:
1700 Hz
Transducers
Compression Driver:
1.0'', 1.4'' v.c
Nominal Impedance (ohm):
8 ohm
Input Power Rating:
25 W AES, 50 W PEAK
Sensitivity:
106 dB, 1W @ 1m
Woofer:
10'', 2.5'' v.c
Nominal Impedance (ohm):
8 ohm
Input Power Rating:
250 W AES, 500 W PEAK
Sensitivity:
97 dB, 1W @ 1m
Input/Output section
Input connectors:
Euroblock
Output connectors:
Euroblock
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
MDF
Hardware:
6 x M8, 2 x M10
Grille:
Steel with robust double mesh polyester
clothing
Color:
Black
Size
Height:
500 mm / 19.69 inches
Width:
298 mm / 11.73 inches
Depth:
320 mm / 12.6 inches
Weight:
13.2 kg / 29.1 lbs
Shipping informations
Package Height:
590 mm / 23.23 inches
Package Width:
388 mm / 15.28 inches
Package Depth:
388 mm / 15.28 inches
Package Weight:
14.8 kg / 32.63 lbs
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.
Loading...