RCF ES-3080 Data Sheet
ES 3080
MIXER-AMPLIFIER WITH MP3 PLAYER AND BLUETOOTH
DESCRIPTION
ES 3080 is an 80 W mixer-amplifier with a
MP3 player directly accessible on the front
panel. It can read USB sticks, SD cards, has an
auxiliary input port with 3.5mm jack and
Bluetooth technology for the connection with
external sources. Moreover, it offers 2 mic-line
audio inputs on removable connectors (the
first input also has an XLR socket). Input 2
also has an RJ 45 port for quick connection of
an RCF BM 3001 paging microphone (through
CAT5 cable). The amplifier output is available
either for low impedance speakers (min. 4 O)
or 100 – 70 V constant voltage line (for
speakers having 100 – 70 V transformers).
Input 1 has a signal detection circuit (‘VOX’)
for automatic priority. Inputs 1 and 2 can
access the priority through an external
command (connected to either the
removable connector or the RJ 45 port).
The MUSIC ON HOLD output directly sends
the internal MP3 player signal to additional
amplifiers, mixers, phone systems (‘music on
hold’ function), etc. The PRE OUT output
sends the signal (the same routed to the
internal amplifier) to additional amplifiers. The
2 mic-line inputs have a high-pass filter (with
a common on/off dip-switch) that are useful
FEATURES
• Audio source with 80W power amplifier
• MP3 player controlled from the front panel
• MP3 inputs: USB flash, SD card, AUX jack 3.5mm
• Bluetooth connection with external devices.
• 2 universal inputs on removable screw-terminals and 1 AUX input
• Configurable priority settings, VOX facility on input 1
• Auxiliary output MUSIC ON HOLD to send the audio signal to external amplifiers or telephone
switchboards
• PRE OUT connector for additional power amplifiers
• HI-PASS control (inputs 1 and 2)
• Auxiliary input on RCA connector and MP3 player equipped with independent tone controls (bass and
treble) and gain
DATASHEET
TECHNICAL SPECIFICATIONS
Amplifier specifications
Number of channels:
1
Power output (@ 100 V):
80 W RMS
Frequency Response (-3dB):
50 Hz ÷ 16 kHz
Distortion (THD+N) @ 1 kHz nominal
power:
<0.3 %
Input section
Total number of inputs:
5
Balanced:
5
Unbalanced:
1
Mono:
4
Stereo:
2
Line inputs:
2
Line connectors:
JACK, RCA
Mic+Line inputs:
2
Mic+Line connectors:
Euroblock, XLR
Mic+Line Phantom:
30 V DC
VOX:
Yes
Paging inputs:
1
Paging connectors:
RJ45
Paging command:
Contact
Output section
Signal output number:
2
Signal output connectors:
RCA
Power output connectors:
Euroblock
Processing
Tone controls:
Yes
High-pass filter:
150 Hz
Controls
Configuration:
DIP switch, Front panel
Priority:
Yes
Music on hold:
Yes
Chime tone:
Yes
Protections
Cooling:
Convection
Short circuit:
Yes
Thermal:
Yes
DC:
Yes
Fuses:
Yes
Audio sources
USB pen drives:
Yes
SD card:
Yes
Bluetooth:
Yes
Power requirement
Operating voltage:
220-240/115 V~ 50/60Hz
Voltage selection:
Internal
Power consumption:
160 W
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.
Loading...