
2 INPUT, 6 OUTPUT DIGITAL PROCESSOR
The DX 2006 is a 2 input - 6 output
loudspeaker management device with 40 bit
floating point DSP and 96 kHz sampling rate,
suitable for the optimization of passive
loudspeaker systems. The DX 2006 offers
flexible routing, signal processing and
equalization and can be used also for multiple
ways and multi-amplified systems managing.
LCD, controls and LED indicators are available
on the frontal panel and it is also possible to
set up and control the processor through a
PC. Various crossover modes are available
and 30 programs/Settings can be stored.
The DX 2006 is shipped with a special PC
Graphic User Interface (GUI) application Xlink that gives the user an option to control
the digital processor. The GUI application
makes it much easier to control and monitor
the device, allowing the user to get the whole
picture on screen. Programs can be recalled
and stored from/to PC hard drive, thus
expanding the storage to become virtually
limitless.
• 2 inputs that can be mixed to 6 outputs
• 40-bit floating point DSP
• 96 kHz sampling rate
• 24-bit A/D D/A converters
• 1 Hz frequency resolution (EQ / filters)
• 8 equalizers for each input and output
• Multiple crossover types; limiters
• Level, polarity and delay settings
• Firmware upgrade via PC
• Individual channel buttons (for editing) with linking capability
DATASHEET

Frequency Response (-3dB):
Crosstalk (on the whole bandwitch):
Distortion (THD+N) @ 1 kHz nominal
power:
Common Mode Rejection Ratio (50 Hz to
10 kHz):
Digital audio performance
Signal output connectors:
Number of programs/presets:
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.