PROFESSIONAL ACTIVE
ART 7 SERIES
a new generation of speakers is born and it’s ready to rock audiences all over the world
SUBWOOFERS
SAFETY PRECAUTIONS
Before connecting and using the amplifier, please read this instruction manual carefully and keep it on hand for future reference. The manual
is to be considered an integral part of the product and must accompany the amplifier when it changes ownership as a reference for correct
installation and use as well as for the safety precautions. RCF S.p.A. will not assume any responsibility for the incorrect installation and/or
use of the product.
WARNING: To prevent the risk of fire or electric shock, never expose this equipment to rain or humidity.
1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important information.
2. The power supply voltage of this equipment is sufficiently high to involve a risk of electrocution; therefore, never install or connect the
product with the power supply switched on.
3. Before powering up the amplifier, make sure that all the connections have been made correctly and that the voltage of your power mains
corresponds to the voltage shown on the rating plate on the unit; if it does not, please contact your RCF dealer.
4. The metallic parts of the unit are earthed by means of the power cable. In the event that the current outlet used for power does not provide
the earth connection, contact a qualified electrician to earth the equipment using the dedicated terminal.
5. To protect the power cable from damage, make sure that it is positioned so that it cannot be stepped on or crushed by objects.
6. To prevent the risk of electric shock, never open the amplifier. There are no parts on the inside that the user needs to access.
7. Make sure that no objects or liquids can get into the amplifier, as this may cause a short circuit.
8. Never attempt to carry out any operations, modifications, or repairs that are not expressly described in this manual. Contact your authorized
service centre or qualified personnel should any of the following occur:
- the amplifier does not function (or functions in an anomalous way);
- the power supply cable has been damaged;
- objects or liquids have got into the unit;
- the amplifier has been subject to heavy impact.
9. When the amplifier is not to be used for long periods of time, switch it off and disconnect the power cable.
10. If the amplifier begins to emit any strange odours or smoke, switch it off immediately and disconnect the power supply cable.
11. Do not connect this product to any equipment or accessories not specified.
For suspended installation, only use the dedicated anchoring points and do not try to hang this product using HANDLES or elements that
are unsuitable or not specific for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and the components used
for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system/installation over
time, also considering, for example, the mechanical vibrations normally generated by the transducer.
To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is specified in the instruction manual.
12. RCF S.p.A. strongly recommends this product is installed by professional qualified installers (or specialised firms) who can ensure correct
installation and certify it according to the regulations in force.
THE ENTIRE AUDIO SYSTEM MUST COMPLY WITH THE CURRENT STANDARDS AND REGULATIONS REGARDING ELECTRICAL SYSTEMS.
13. SUPPORTS AND TROLLEYS
The equipment should only be used on trolleys or supports, where necessary, that are recommended by the manufacturer. The
equipment/support/trolley assembly must be moved with extreme caution. Sudden stops, excessive pushing force and uneven floors may
cause the assembly to overturn.
14. There are numerous mechanical and electrical factors to be considered when installing a professional audio system (in addition to those
which are strictly acoustic, such as sound pressure, angles of coverage, frequency response, etc.).
15. HEARING LOSS
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level that leads to hearing loss is different from person
to person and depends on the duration of exposure. To prevent potentially dangerous exposure to high levels of acoustic pressure, anyone
who is exposed to these levels should use adequate protection devices. When a transducer capable of producing high sound levels is being
used, it is therefore necessary to wear ear plugs or protective earphones. See the technical specifications in the instruction manual for the
maximum sound pressure the loudspeaker is capable of producing.
IMPORTANT NOTES
To prevent the occurrence of noise on the cables that carry microphone signals or line signals (for example, 0 dB), only use screened cables
and avoid running them in the vicinity of:
- equipment that produces high-intensity electromagnetic fields (for example, high power transformers);
- mains cables;
- lines that supply loudspeakers.
english
2
english
OPERATING PRECAUTIONS
- Do not obstruct the ventilation grilles of the unit. Situate this product far from any heat sources and always ensure adequate air circulation
around the ventilation grilles.
- Do not overload this product for extended periods of time.
- Never force the control elements (keys, knobs, etc.).
- Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this product.
ART 7 SERIES
Back in 1996 RCF moved into the forefront of the active loudspeaker technology with the introduction of the ART Series: a loudspeakers range
that was able to deliver perfect and powerful sound with a lightweight cabinet strong enough to withstand everyday use.
The RCF R&D team kept evolving the ART technology during the last decade, developing reference products such as the ART 322-A, the ART
310-A and the new digitally amplified ART 525-A.
The RCF Team always has the performer’s needs at the forefront of the design in order to create new lines of speakers with renewed features,
improved sound clarity and definition and even lighter weight systems.
The latest iconic design is the ART 7 Series: an evolution in the active loudspeaker technology with a revolutionary design and sound.
Every detail of the 7 Series has been carefully studied in order to offer musicians and professionals the perfect tool to amplify their performance,
night after night. High quality materials, precise manufacturing, careful assembly and extensive quality control procedures complete the
groundbreaking design work of the RCF R&D team.
EVOLUTION IN TECHNOLOGY, REVOLUTION IN SOUND
COMPONENTS
All the transducers in the Art 7 Series speakers feature light weight neodymium magnets in order to guarantee a better performance and
make for easier transportation.
All transducers are precision built taking advantage of RCF’s superior moulding, assembly technologies and a wealth of professional knowledge
and experience dedicated to achieving extremely high standards.
AMPLIFIERS
Art 7 Series Subwoofers are equipped with a new generation of 1000 Watt Digital Amplifiers. The result of this is very high output, extremely
low distortion and an incredible natural sound.
Each amplifier presents both Stereo XLR/jack (Combo) balanced inputs, XLR output link, volume and a switchable crossover (80 Hz/110 Hz).
The amplifier features a solid mechanical aluminium structure which not only stabilize the amplifier during transportation but also assist in
the heat dissipation.
All the Art 7 Series amplifiers presents PFC power supply section in order to produce maximum output even in case of tension drops from
main supply.
CABINETS
The new loudspeaker design looks aggressive whilst retaining familiar Art ergonomics and is the result of extensive combined functional
and acoustic research.
The Art 7 Series subwoofer cabinets are built in birch plywood and are designed to dampen down vibrations even at maximum volume
settings. The reflex porting has been resized to offer a better efficiency. The cabinet is equipped with 2 ergonomically designed forged
aluminium handles with rubber handgrip. At the top a rugged steel pole mount has been installed in all models.
3
REAR PANEL FEATURES AND CONTROLS
STEREO JACK/FEMALE XLR INPUTS (BAL/UNBAL)
The system accept jack or XLR input connectors.
LIMITER LED
The amplifier has a built in limiter circuit to prevent clipping
of the amplifiers or overdriving the transducers. When the
soft clipping circuit is active the LED blinks orange. It is okay
if the limit LED blinks occasionally. If the LED blinks frequently
or lights continuously, turn down the signal level.
SIGNAL LED
The signal indicator lights green if there is signal present on
the main XLR input.
STATUS LED
The status indicator flash if the temperature protection is
active.
POWER LED
This green led is ON when the speaker is connected to the
main power supply and the ON/OFF is in ON position.
MALE XLR SIGNAL/XOVER OUTPUT
The output XLR connector provides a loop trough for speakers
daisy chaining (or provides a crossover output when the
crossover switch is pushed).
VOLUME CONTROL
Adjust the amplifier volume.
LINK/XOVER OUT SWITCH
The output link is flat when the switch is OFF (the output
signal is the same as the input signal), or is high passed when
the switch is ON (to connect a satellite speaker).
XOVER SWITCH
This switch sets the crossover frequency of the OUTPUT
SIGNAL at 80 Hz or 120 Hz.
PHASE SWITCH
This switch reverse the phase of the output signal.
IEC AC SOCKETS
The IEC AC socket provides IN-OUT connections for the power
cord to the socket and additional power link.
POWER MAIN SWITCH
The power switch turns the AC power ON and OFF.
english
1
2
3
4
5
6
7
8
9
10
4
11
12
1
3
4
5
2
6
7
8
10
9
11
12
Loading...