ART
ART
PROFESSIONAL ACTIVE SPEAKER SYSTEMS
For natural sound and clarity, nothing comes close – when you come to
audition an ART you will know why we moved heaven and earth to get the
perfect sound – so that you can.
2
IMPORTANT NOTES
Before connecting and using the amplifier, please read this instruction manual carefully and keep it on hand for
future reference. The manual is to be considered an integral part of the product and must accompany the amplifier
when it changes ownership as a reference for correct installation and use as well as for the sa fety precautions.
RCF Spa. will not assume any responsibility for the incorrect installation and/or use of the product.IANO
WARNING: To prevent the risk of fire or electric shock, never expose this equipment to rain or humidity.
SAFETY PRECAUTIONS
1. All the precautions, in particular the safety ones, must be read with special attention, as they provide important
information.
2. The power supply voltage of this equipment is sufficiently high to involve a risk of electrocution; therefore, never
install or connect the product with the power supply switched on.
3. Before powering up the amplifier, make sure that all the connections have been made correctly and that the
voltage of your power mains corresponds to the voltage shown on the rating plate on the unit; if it does not, please
contact your RCF dealer.
4. The metallic parts of the unit are earthed by means of the power cable. In the event that the current outlet used
for power does not provide the earth connection, contact a qualified electrician to earth the equipment using the
dedicated terminal.
5. To protect the power cable from damage, make sure that it is positioned so that it cannot be stepped on or
crushed by objects.
6. To prevent the risk of electric shock, never open the amplifier. There are no parts on the inside that the user
needs to access.
7. Make sure that no objects or liquids can get into the amplifier, as this may cause a short circuit.
8. Never attempt to carry out any operations, modifications, or repairs that are not expressly described in this
manual.
Contact your authorized service centre or qualified personnel should any of the following occur:
- the amplifier does not function (or functions in an anomalous way);
- the power supply cable has been damaged;
- objects or liquids have got into the unit;
- the amplifier has been subject to heavy impact.
9. When the amplifier is not to be used for long periods of time, switch it off and disconnect the power cable.
10. If the amplifier begins to emit any strange odours or smoke, switch it off immediately and disconnect the power
supply cable.
11. Do not connect this product to any equipment or accessories not specified.
For suspended installation, only use the dedicated anchoring points and do not try to hang this product using
HANDLES or elements that are unsuitable or not specific for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and
the components used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must
guarantee the security of the system/installation over time, also considering, for example, the mechanical vibrations
normally generated by the transducer.
To prevent the risk of falling equipment, do not stack multiple units of this product unless this possibility is specified
in the instruction manual.
12. RCF Spa. strongly recommends this product is installed by professional qualified installers (or specialised
firms) who can ensure correct installation and certify it according to the regulations in force.
The entire audio system must comply with the current standards and regulations regardi ng electrical systems.
13. Supports and trolleys
The equipment should only be used on trolleys or supports, where necessary, that are recommended by the
manufacturer. The equipment/support/trolley assembly must be moved with extreme caution. Sudden stops,
excessive pushing force and uneven floors may cause the assembly to overturn.
14. There are numerous mechanical and electrical factors to be considered when installing a professional audio
system (in addition to those which are strictly acoustic, such as sound pressure, angles of coverage, frequency
response, etc.).
15. Hearing loss
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure leve l that leads to hearing
loss is different from person to person and depends on the duration of exposure. To prevent potentially dangerous
exposure to high levels of acoustic pressure, anyone who is exposed to these levels should use adequate
protection devices. When a transducer capable of producing high sound levels is being used, it is therefore
necessary to wear ear plugs or protective earphones.
See the technical specifications in the instruction manual for the maximum sound pressure the loudspeaker is
capable of producing
IMPORTANT NOTES
To prevent the occurrence of noise on the cables that carry microphone signals or line signals (for example, 0 dB),
only use screened cables and avoid running them in the vicinity of:
3
- equipment that produces high-intensity electromagnetic fields (for example, high power transformers);
- mains cables;
- lines that supply loudspeakers.
OPERATING PRECAUTIONS
- Do not obstruct the ventilation grilles of the unit. Situate this product far from any heat sources and always
ensure adequate air circulation around the ventilation grilles.
- Do not overload this product for extended periods of time.
- Never force the control elements (keys, knobs, etc. ).
- Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this
product.
4
THE PHILOSOPHY OF ART
ART was originally conceived way back in 1996. The brief was a tough one. To create perfect sound. Moreover,
the speaker enclosures were to be portable, lightweight and strong enough to withstand every day use. The brief
remains the same but with even more exacting challenges. Portable and even lighter in weight systems were a
must, plus the demands from Musicians for improved vocal clarity and definition.
To achieve this RCF has taken the numerous new technological advances in our own tran sducer developments
along with designing new digital amplifier technology. Our new RCF Precision Series of light in weight Neodymium
woofers and compression drivers provide this goal.
THE ART SERIES
The new ART SERIES is a range of professional active speaker systems that combines high power and wide
bandwidth in a light weight enclosure.
COMPONENTS
The woofers used in the new Art Series can withstand peak power of up to 6 times the nominal power. These mid
bass woofers have been designed for superior reproduction of acoustic signals up to the crossover frequency.
Specific attention has been applied to the speaker cones, all are optimized for shape and pulp composition.
Our edgewound copper clad aluminium voice coils provide maximum efficiency and hig h speed for accurate
transient response. ‘’Inside /Outside ’’copper clad aluminium voice coils provide maximum reliability. Our massive
magnets offer superior bass control and mid-bass voice presence.
Our state of the art compression drivers are made from neodymium magnetic circuit technology, reaching levels
that exceed 2 Kilogauss in the gap. Thanks to RCF’s “pure titanium” diaphragms and proprietary high pressure
oxygen free moulding technology, we are able to reproduce transparent and accurate high frequencies true in all
the audible range.
AMPLIFIERS
The ART 522-a and ART 525-A models are designed using the newly created Digital Amplifier Technology. Based
around 500 watt low and 250 watt high Bi- Amplified modules, each amplifier has a specific input board and is setup to optimise the performance in conjunction to the specific transducers in each model. Each amplifier will give
you volume control, combo jack-XLR balanced inputs and XLR Output link.
CABINETS
Art’s polynomial constant directivity horn has virtually the same physical area as a 15” woofer. This means that the
driver is perceived to achieve the same output power as the low section with minimum diaphragm excursion,
resulting in a well defined, natural and open sound.
The shape of the horn is a unique design able to provide exceptional constant directivity with both the 1” and 2”
compression drivers.
Art’s bass reflex cabinet is moulded in a special polypropylene composite material
resulting from years of experience in plastic cabinet designs, which provide superior stiffness for the weight and
excellent low frequency damping.
Each cabinet is equipped with ergonomically designed handles on each side and a comfortable top handle for easy
manoeuvrability in every situation. Four M10 threaded inserts are provided for optional mounting hardware in
Installed Sound Applications.
Loading...