AM 2160
MIXER AMPLIFIER
DESCRIPTION
AM 2160 is a mixer-amplifiers with 4 mic-line
audio inputs on removable connectors (the
first input also has an XLR socket) and 2 aux
inputs for music sources (e.g. CD players,
tuners, etc.). 160 W nominal output power
available either for low impedance
loudspeakers or 100 – 70 V constant voltage
line.
FEATURES
• Full digital technology Mixer Amplifier 160 W RMS
• 100 V - 70 V and 4 Ohm outputs
• 4 universal inputs with phantom facility on screw terminal connections
• Presence Control and per-channel High-Pass filters
• XLR connector on input 1
• RJ45 connectors on input 2 and 3 for connection to BM3001 microphone
• Configurable Priority settings, VOX facility on input 1
• Selectable aux inputs with two keys on the front panel for music source
• Aux inputs with volume and tone controls
• Music On Hold and PRE outputs
DATASHEET
TECHNICAL SPECIFICATIONS
Amplifier specifications
Amplifier Class:
D
Number of channels:
1
Power output per channel (@ 4 ohm):
160 W RMS
Power output (@ 100 V):
160 W RMS
Frequency Response (-3dB):
50 Hz ÷ 14 kHz
Distortion (THD+N) @ 1 kHz nominal
power:
<0.3 %
Input section
Total number of inputs:
8
Balanced:
7
Unbalanced:
2
Mono:
7
Stereo:
2
Line inputs:
2
Line connectors:
RCA
Mic+Line inputs:
4
Mic+Line connectors:
Euroblock, XLR
Mic+Line Phantom:
32 V DC
VOX:
Yes
Paging inputs:
2
Paging connectors:
RJ45
Paging command:
Contact
General Purpose Inputs (GPI):
2
Output section
Signal output number:
2
Signal output connectors:
RCA
Power output connectors:
Euroblock
Processing
Tone controls:
Yes
High-pass filter:
150 Hz
Controls
Configuration:
DIP switch, Front panel
Priority:
Yes
Music on hold:
Yes
Chime tone:
Yes
Protections
Cooling:
Convection
Short circuit:
Yes
Thermal:
Yes
DC:
Yes
Fuses:
Yes
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.
Loading...