AM 2080
MIXER AMPLIFIER
DESCRIPTION
AM 2080 is a mixer-amplifiers with 2 mic-line
audio inputs on removable connectors (the
first input also has an XLR socket) and 2 aux
inputs for music sources (e.g. CD players,
tuners, etc.).
The nominal power: is a 80 W amplifier. The
amplifier output is available either for low
impedance loudspeakers or 100 – 70 V
constant voltage line.
FEATURES
• Full digital technology Mixer Amplifier 80 W RMS
• 100 V - 70 V and 4 Ohm outputs
• 2 universal inputs with phantom facility on screw terminal connections
• XLR connector on input 1
• RJ45 connectors on input 2 for connection to BM3001 microphone
• Configurable Priority settings, VOX facility on input 1
• Selectable aux inputs with two keys on the front panel for music source
• Aux inputs with volume and tone controls
• Music On Hold and PRE outputs
• Digital Chime and Siren built-in generator
DATASHEET
TECHNICAL SPECIFICATIONS
Amplifier specifications
Number of channels:
1
Power output per channel (@ 4 ohm):
80 W RMS
Power output (@ 100 V):
80 W RMS
Frequency Response (-3dB):
50 Hz ÷ 16 kHz
Signal/noise rate (”A” weighted)
>80 dB
Distortion (THD+N) @ 1 kHz nominal
power:
<0.3 %
Input section
Total number of inputs:
5
Balanced:
5
Unbalanced:
1
Mono:
4
Stereo:
2
Line inputs:
2
Line connectors:
RCA
Mic+Line inputs:
2
Mic+Line connectors:
Euroblock, XLR
Mic+Line Phantom:
30 V DC
VOX:
Yes
Paging inputs:
1
Paging connectors:
RJ45
Paging command:
Contact
Output section
Signal output number:
2
Signal output connectors:
RCA
Power output connectors:
Euroblock
Processing
Tone controls:
Yes
High-pass filter:
150 Hz
Controls
Configuration:
DIP switch, Front panel
Priority:
Yes
Music on hold:
Yes
Chime tone:
Yes
Protections
Cooling:
Convection
Short circuit:
Yes
Thermal:
Yes
DC:
Yes
Fuses:
Yes
Power requirement
Operating voltage:
220-240/115 V~ 50/60Hz
Voltage selection:
Internal
Power consumption:
160 W
DATASHEET
RCF products are continually improved. All specifications are therefore subject to change without notice.
Loading...