RCA VH915 User Manual
4-Source Audio/Video Switcher
TELEVISION
OR
DC 9V
200mA
AUDIO IN 1 VIDEOAUDIO IN 2 VIDEOAUDIO IN 3 VIDEOAUDIO IN 4 VIDEOAUDIO OUT VIDEO
L
R
S
L
R
S
L
R
S
L
R
S
L
R
S
with Remote Control
Voltee el libro para instrucciones en españo
VH915N User's Manual
l
Installation
This switcher lets you manage up to four video sources through one video input on
your TV. The back panel of the switcher has four inputs and one output. Connect the
switcher to your TV first.
Important: Use either composite video (the yellow jacks) or S-Video on all of your
connections. If all of your components (including your TV) offer S-Video connections,
use all S-Video connections. Otherwise, use all composite video connections.
Connecting to your TV
1. Make the video connection.
Connect EITHER an S-Video cable or
a composite video cable to the corresponding OUT VIDEO jack on the
switcher's back panel. Connect the
other end of the cable to the TV's video
input jack.
2. Make the audio connection.
Connect a stereo audio cable to the
OUT AUDIO R and L jacks on the
switcher's back panel. Connect the
other end of the cable to your TV's
audio input jacks.
Make sure you match the color coding at the end of the cables with the color cod-
ing on the jacks—match red with red and white with white.
Safety Information
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside.
Refer servicing to qualified service personnel.
Warning: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The
apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be
placed on the apparatus.
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record
the model number in case you need it. This number is located on the product.
Model Number: ______________________________Purchase Date: ____________________________
Dealer/Address/Phone: ________________________________
This symbol indicates important instructions
accompanying the product.
VCRDBS
CAMCORDER
DVD
VIDEO
GAME
(Audio/Video
or
S-Video
hook-up
only)
OR OR OR OR
DC 9V
200mA
AUDIO IN 1 VIDEO AUDIO IN 2 VIDEO AUDIO IN 3 VIDEOAUDIO IN 4 VIDEOAUDIO OUT VIDEO
L
R
S
L
R
S
L
R
S
L
R
S
L
R
S
Connecting to your input components
1. Make the video connection.
For the first component, connect EITHER an S-Video cable or a composite video
cable to the corresponding IN1 VIDEO jack on the switcher's back panel.
Connect the other end of the cable to the component's video output jack.
2. Make the audio connection.
For the first component, connect a stereo audio cable to the IN1 AUDIO jacks on
the switcher's back panel.
Connect the other end of the cable to the component's audio output jacks.
Make sure you match the color coding at the end of the cables with the color
coding on the jacks—match red with red and white with white.
3. Repeat the video and audio connection steps for your other input components on
IN2, IN3 and IN4.
As you connect your components to the input jacks, note which component you
have connected to each jack in the space provided below. This information is
important to have handy.
REFERENCE CHART
INPUT 1 INPUT 2 INPUT 3 INPUT 4
Note which component you connect to each input.
2
Installing batteries in your remote
Your remote requires two AAA alkaline batteries (sold separately).
To install the batteries:
1. Remove the battery compartment cover.
2. Insert the batteries, matching the (+) and (–) marks inside the battery
compartment.
3. Push the battery cover back into place.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium)
batteries.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of
them in accordance with Local and National Regulations.
Connecting to a power source
Connect the supplied power adapter to the DC9V jack on the back of the switcher.
Plug the other end of the power adapter into a wall outlet or surge protector.
Important: This power unit is intended to be correctly oriented in a vertical or floor
mount position.
Using the switcher
Once you've installed the switcher, you're ready to start using it.
Getting Started
• MakesureyourTVandcomponentsareturnedon.
• Makesureyou'rewatchingthecorrectinputontheTV—forexample,ifyou've
connected the switcher to the VID input on your TV, you need to "tune" to this
input in order to see the switcher on the TV screen.
To turn the switcher on: Press the POWER key on the remote control or on the
switcher's front panel. The switcher's display panel should light up.
To switch between inputs: Press the SELECT key on the remote control or on the
switcher's front panel. The switcher's display panel changes numbers and your TV
should show the corresponding signal.
To go to a specific input: Press one of the number keys on the remote. The switcher
display panel changes to that number and your TV screen should display the signal
from that input.
3
Using the Scan function
This switcher also offers an automatic scanning function, which automatically cycles
through the inputs at an interval you set. The scan function is ideal for use with security
cameras or other home monitoring devices.
To activate the scan function: Press the SCAN key on the remote control or on the
switcher's front panel. The switcher starts scanning through the input automatically
after 2-3 seconds.
To deactivate the scan function: Press the one of the input number keys or the SELECT
key on the remote.
To increase the scanning interval: Press the SCAN key. Each press increases the
interval—use the following chart as a guide.
Press Interval
1st 2.5 seconds
2nd 5 seconds
3rd 7.5 seconds
4th 10 seconds
5th 12.5 seconds
6th 15 seconds
7th 17.5 seconds
8th 20 seconds
Troubleshooting
Most difficulties you encounter with the switcher can be fixed by trying one of the
following solutions.
Problem: Switcher won't turn on.
• Make sure the power adapter is properly connected to the switcher and plugged
into the wall.
Problem: No video/audio from the TV.
• Make sure your TV is turned on.
• Make sure the switcher is turned on.
• Make sure the device connected to the input you want to see is turned on and
transmitting a signal. For example, if you want to watch your DVD player, make sure
the DVD player is on and that a DVD is playing.
• Make sure all video and audio cables are firmly inserted in the correct inputs and
outputs on the switcher and on the components.
4
Loading...