RCA TV-DVD User Manual
TV/DVD
User's Guide
Changing Entertainment. Again.
Important Safety Information
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS
OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
Note:
This DVD player is designed and manufactured to
respond to the Region Management Information.
If the Region number of a DVD disc does not
correspond to the Region number of this DVD
player, this DVD player cannot play the disc. The
Region number for this DVD player is Region No 1.
Note:
This device is protected by U.S. patent numbers
4,631,603 and 4.577,216 and 4,819,098 and other
intellectual property rights. The use of Macrovision's
copy protection technology in the device must be
authorized by Macrovision and is intended for home
and other limited pay-per-view uses only, unless
otherwise authorized in writing by Macrovision.
Reverse engineering or disassembly is prohibited.
CLASS 1
LASER
PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates "dangerous
voltage" inside the product that
presents a risk of electric shock or
personal injury.
Caution: To prevent electric shock, match wide blade of plug to
wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduire la lame la
plus large de la fiche dans la borne correspondante de la prise et
pousser jusqú au fond.
Refer to the identification/rating label located on the back panel
of your product for its proper operating voltage.
FCC Regulations state that unauthorized changes or modifications to this equipment
may void the user’s authority to operate it.
This Class B digital apparatus complies with Canadian ICES-003.
Caution: Using video games or any external accessory with fixed images for
extended periods of time can cause them to be permanently imprinted on the
picture tube (or projection TV picture tubes). ALSO, some network/program
logos, phone numbers, etc. may cause similar damage. This damage is not
covered by your warranty.
Cable TV Installer: This reminder is provided to call your attention to Article 820-40
of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1)
which provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building as close to
the point of cable entry as practical.
This symbol indicates
important instructions
accompanying the
product.
Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Product Registration
Please fill out the product registration card (packed separately) and return it immediately. Returning the card allows us to contact you if needed.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers
in case you need them. These numbers are located on the product.
Model No. _____________________________________ Serial No.______________ Purchase Date: _____________________________________
Dealer/Address/Phone: _______________________________________________________________________________________________________
2 Important Safety Information
Important Safety Information
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your product, safety is a major factor in the design of
every product. However, safety is your responsibility too.
This sheet lists important information that will help to assure your enjoyment and proper use of the product and accessory equipment. Please
read them carefully before operating and using your product.
Installation
1Read and Follow Instructions—All the safety and operating instructions should be read before the product is operated. Follow
all operating instructions.
2Retain Instructions—The safety and operating instructions should be retained for future reference.
3Heed Warnings—Comply with all warnings on the product and in the operating instructions.
4Polarization/Grounding—This product is equipped with either a polarized, non-polarized, or a grounding type power cord plug. If
equipped with the non-polariz-ed type (two blades of identical size), the following does not apply.
•A polarized power plug (two blades, one wider than the other) will fit into a power receptacle only one way. This is a safety
feature. Do not defeat it. If you are unable to insert the plug fully, try reversing it, or have an electrician change the
receptacle. If you need an extension cord, use only a polarized extension cord.
•A grounding type power plug (two blades and a round pin) will fit only into a grounding type receptacle with matching
openings. This is a safety feature. Do not defeat it. You may need an electrician to install a grounding type receptacle. If you
need an extension cord, use only a grounding type extension cord.
5Power Sources—This product should be operated only from the type of power source indicated on the product's marking label. If you are
not sure of the type of power supply to your home, consult your dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
6Overloading—Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Overloaded
AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They
may result in a shock or fire hazard. Periodically examine the cord, and if its appearance indicates damage or deteriorated
insulation, have it replaced by your service technician.
7 Power-Cord Protection—Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon
or against them. Pay particular attention to cords where they are attached to plugs, convenience receptacles and at the point where they
exit from the product.
8Ventilation—Slots and openings in the enclosure are provided for ventilation to ensure reliable operation of the product and to protect it
from overheating. These openings must not be blocked or covered. These openings should never be blocked by placing the product on a
bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or another heat source
(including amplifiers). This product should not be placed in a built-in instal-lation such as a bookcase or equipment rack unless proper
ventilation is provided or the product manufacturer’s instructions have been followed.
9Attachments—Do not use attachments unless recommended by the product manufacturer as they may cause hazards.
10 Water and Moisture—Do not use this product near water—for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool and the like.
11 Accessories—Do not place this product on an unstable surface or support. The product may fall, causing serious injury to a child or adult as
well as serious damage to the product. Any mounting of the product should follow the manufacturer’s in-structions and use only
a mounting accessory recommended by the manufacturer.
11A A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the
product and cart combination to overturn.
12 Outdoor Antenna Grounding—If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges
and built-up static charges. Section 810 of the
National Electrical Code, ANSI/NFPA No. 70-1984
(Section 54 of Canadian Electrical Code, Part 1)
provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antennadischarge unit, size of grounding conductors,
location of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See example on the right.
Example of Antenna
Grounding
Important Safety Information 3
Important Safety Information
IMPORTANT SAFEGUARDS
13 Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching or approaching such power lines or circuits as contact with them might be fatal. Installing an outdoor antenna can be
hazardous and should be left to a professional antenna installer.
Use
14 Cleaning —Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
15 Object and Liquid Entry —Never push objects of any kind into this product through openings as they may touch dangerous voltage or
“short-out” parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
16 Lightning —For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power line surges.
Service
17 Servicing — Do not attempt to service this product yourself as opening or remov-ing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
18 Conditions Requiring Service — Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions.
A. When the power-supply cord or plug is damaged.
B. If liquid has been spilled, or objects have fallen into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the
operating instructions. Improper adjustment of other controls may result in damage and will often require
exten-sive work by a qualified technician to restore the product to its normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. When the product exhibits a distinct change in performance, such as the inability to perform basic functions —
this indicates a need for service.
19 Replacement Parts — When replacement parts are required, have the service technician verify that the
replacement parts he uses have the same safety characteristics as the original parts. Use of replacements
specified by the product manufacturer can prevent fire, electric shock, or other hazards.
20 Safety Check— Upon completion of any service or repairs to this product, ask the service technician to perform safety checks recommended
by the manufacturer to determine that the product is in safe operating condition.
21. Heat— The product should be situated away from heat sources such as radiators, heat registers, stoves or other products ( including
amplifiers) that produce heat.
22. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall be placed on the apparatus.
Power Source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
Important Stand and Base Safety Information
Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to prevent the TV from being
accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to TV. Refer to the Important Safety
Instructions on page 3 of this manual.
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard
120V 60Hz polarized AC outlet.
NOTES:
•Never connect the AC line cord plug to other than the specified voltage (120V 60Hz). Use the
attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC outlet, do not attempt to file or cut
the blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The unit should return to normal operation.
4 Important Safety Information
Table of Contents
Safety Information...........................................2
Explanation of Jacks and Cables ....................6
Video Jacks and Cables ......................................................... 6
Audio Jacks and Cables ......................................................... 6
Digital Audio Optical and Coaxial cables ........................ 7
Front Panel Controls ........................................7
The Buttons On the Remote control ................................. 8
TV Function Buttons .............................................................. 8
DVD Function Buttons ........................................................... 9
Putting Batteries in the Remote..................... 9
TV Menus ....................................................... 10
TV Menu Navigation ............................................................ 10
The PICTURE menu ............................................................... 10
The SOUND menu ................................................................. 11
The TIMER menu ................................................................... 11
The FUNCTION menu ........................................................... 11
The PARENTAL CONTROL menu
and V-CHIP .................................................... 12
Blocking TV Ratings ............................................................. 14
Blocking Specific Content Themes .................................. 15
V-Chip Movie Rating Limit ................................................15
Parental Guide On (Activate V-Chip) .............................. 16
Child Lock................................................................................ 16
Change Password.................................................................. 16
DVD Basics ..................................................... 17
Regional Coding .................................................................... 17
Using Different Menus ........................................................ 17
Types of Discs Your DVD Will Play ...................................17
Search Options .............................................. 18
Picture Scan ...........................................................................18
Freeze Frame and frame Advance .................................... 18
Playback Options ........................................... 18
Chapter Advance................................................................... 18
Zoom ........................................................................................ 18
DVD Menus .................................................... 19
General Setup ........................................................................19
TV DISPLAY.............................................................................. 19
PIC MODE ................................................................................20
OSD LANG ............................................................................... 21
CAPTIONS ................................................................................ 21
SCR SAVER .............................................................................. 21
AUDIO SETUP ......................................................................... 22
The PREFERENCE Menu................................ 23
AUDIO....................................................................................... 23
SUBTITLE .................................................................................. 23
DISC MENU............................................................................. 23
PARENTAL................................................................................ 24
DEFAULTS ................................................................................ 24
PASSWORD .............................................................................24
DISC NAV................................................................................. 24
Playing Audio CDs ......................................... 25
Scan Disc ................................................................................. 25
Track Advance or Reverse ................................................... 25
Pause ........................................................................................ 25
EQUALIZER ..............................................................................25
Playing MP3 Discs ......................................... 25
Troubleshooting ............................................. 26
Recommendations and information
concerning discs ............................................ 28
CD-R and CD-RW discs ....................................................... 28
CD-R and CD-RW discs with mp3 format
“Sound” files ..................................................................... 29
Additional Information ................................. 29
Maintenance of Cabinet ..................................................... 29
Formation of Condensation ............................................... 29
Limited Warranty .......................................... 31
DVD Menu System......................................... 19
DVD Menu Navigation .................................. 19
Table of Contents 5
Connections and Setup
TV
(
back panel
)
sid
e panel
(
righ
t
)
ANTENNA IN
VIDEO
L (MONO
S-VIDEO
R
)
INPUT
OUTPU
COAXIAL
DIGITAL AUDI
T
OPTICA
L
O
VIDEO
L (MONO
R
)
AUDI
O
Explanation of Jacks and Cables
Your can connect other components to your TV/DVD player such as a VCD, video camera or audio receiver. There are several ways to
connect your other components to your TV/DVD player depending upon the cables you have and the jacks that are on the back of the
components. Different jacks and cables provide a different level of performance. The jacks on the back of your TV/DVD Player and the
cables used to connect them are explained below.
Video Jacks and Cables
VIDEO Jack and Cable
The basic Video jack (usually color-coded yellow) is also referred to as composite video.
Composite video is better than the video quality you get from an RF coaxial cable (the type used
VIDEO
to plug the cable feed into a TV). Usually the video cable is bundled with the audio cables (white
and red).
S-VIDEO Jack and Cable
The S-VIDEO(separate video) jack provides better picture quality than composite video (the
VIDEO jack) because the color is kept separate from the black and white part of the video signal.
S-VIDEO
Note: Remember to connect the audio cables because the S-Video cable carries only the picture signal, not the sound.
Audio Jacks and Cables
AUDIO L (left) and R (right)
These jacks send the audio from other components to the TV. The audio jacks and cables are
often color-coded (red for right audio, and white for left audio). You must connect audio cables
L (MONO
)
R
6 Connections and Setup
to the AUDIO L and R jacks on the TV/DVD Player and the corresponding Audio Input Jacks on
the component no matter which Video jack you connect (VID1 (SVID), DVD, FRONT).
Note: If your component has only one input for audio (mono), connect it to the left (white L/Mono) audio jack on the TV and
don’t connect the right audio part of the cable.
COAXIAL
OPTICA
L
Front Panel Controls
Connections and Setup
DIGITAL AUDIO OUT/OPTICAL and COAXIAL
Use one of these jacks to connect your TV/DVD Player to a Dolby Digital or DTS receiver or decoder. Some
receivers have either the COAXIAL or OPTICAL type of Digital Audio Input jack, and some have both. Under
most conditions, optical and coaxial connections work equally well — the only difference is the type of
cable you connect to the jack. If you want to use a less expensive cable, connect a coaxial cable to the
COAXIAL jack if your receiver has a Coaxial Input Jack. Rarely, but sometimes, coaxial digital cables —
especially long ones, pick up radio frequency (RF) interference from household appliances, nearby power
lines, and/or broadcast towers. If that is the case, connect an optical cable (sometimes called SPDIF) to the
DIGITAL AUDIO OUT/OPTICAL jack on the DVD Player and a compatible Digital Input Optical Jack on the
receiver.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©
1992-1997 Dolby
Laboratories, Inc. All rights reserved.
DTS is a registered trademark of Digital Home Theater Systems, Inc.
If you cannot locate your remote, you can use the front panel buttons of your TV to operate many of the
TV/DVD’s features.
INPUT Toggles the Video Input Channels from TV, VID1 (SVID), DVD, FRONT.
MENU Brings up the Main menu.
VOL- Decreases the volume. In the menu system, acts like the left arrow button on the remote control and
adjusts menu controls.
VOL+ Increases the volume. In the menu system, acts like the right arrow button on the remote control
and adjusts menu controls.
CH- Scans down through the current channel list. In the menu system, acts like the down arrow button on
the remote control and adjusts menu controls.
CH+ Scans up through the channel list. In the menu system, acts like the up arrow button on the remote
control and adjusts menu controls.
POWER Turns the TV/DVD on and off.
Play/Pause Plays/pauses disc playback.
Stop Stops disc playback.
FWD. Searches forward through a disc while it is in play mode.
REV. Searches backward through a disc while it is in play mode.
Open/Close Opens and closes the disc tray.
Connections and Setup 7
The Remote Control
DVD
VCR TV
VOL
MUTE GO BACK
ON OFF
CH
The Buttons On the Remote control
TV Function Buttons
TV Puts the remote in TV mode. When the set is off, press to turn on the TV.
Mute Lowers the volume to the minimum level. Press again to restore volume.
ON•OFF Turns the TV on and off.
VOL (+/-) buttons Decreases or increases the volume.
CH (+/-) buttons Scans up or down through the current channel list. Press once to
change the channel; press and hold to continue changing channels.
CLEAR
PRESETS
INPUT
RECORD
MENU
OKOK
SKIP
CC
GUIDE
123
4
7
REVERSE
AGAIN
SPEED
SEARCH
INFO
56
89
ANTENNA
0
PLAY
STOP
ZOOM
FORWARD
PAUS E
OPEN CLOSE
Go Back Returns to the previous channel. If you are in the menu system, GO BACK takes
you to the previous menu screen.
CLEAR Removes a menu or display from the screen and returns you to TV viewing. For
menus with digit inputs, pressing CLEAR will clear the last number entered.
MENU Displays the TV’s main menu.
Arrow buttons ( / / / ) Press the arrow buttons to navigate through the on-screen
menu system.
OK button When a menu is on screen, press OK to select the item that is highlighted.
PRESETS Displays the Picture menu.
SKIP Press the button twice to begin channel scan. Press again to select the current
channel.
CC Turns closed captioning on and off.
INFO Displays channel information.
0-9 (Number buttons) Use the number buttons to enter channel numbers. To enter a
two-digit channel, press the two digits. To enter a three-digit channel, press and hold the
first digit for two seconds until two dashes appear to the right of the number, then add the
second two. Example: to tune a channel 123, press and hold 1 for two seconds, press 2,
then press 3.
INPUT Toggles between available inputs.
8 The Remote Control
DVD
ON OFF
The Remote Control
DVD Function Buttons
DVD Puts the remote in DVD mode.
VOL
CLEAR
PRESETS
INPUT
VCR TV
CH
MUTE GO BACK
MENU
OKOK
SKIP
CC
GUIDE
123
4
7
INFO
56
89
ANTENNA
0
CH+/CH- ( , ) advances to the next chapter or track. reverses to the preceding
chapter or track.
CLEAR Used for EQUALIZER function (see page 27).
MENU Displays menus and other options that are available on the current disc (if the
disc contains this information).
Arrow buttons ( / / / ) Press the arrow buttons to move through the on-screen
menu system.
OK button When a menu is on the screen, press OK to select the item that is highlighted.
GUIDE When the DVD player is not playing a disc, displays the DVD player setup menu.
INFO Displays the title, chapter and time information. Press again to remove information
from the screen.
SKIP Advances disc playback 30 seconds.
0-9 (Number buttons) Use to input information such as chapter numbers, and track
numbers.
FORWARD Searches forward through a disc while it is in play mode. Press repeatedly to
increase speed.
PLAY Begins disc play (and closes disc tray if it is open).
PAUSE Pauses disc play. When disc play is paused, press PLAY to resume playback.
REVERSE
RECORD
AGAIN
SPEED
PLAY
STOP
ZOOM
SEARCH
FORWARD
PAUS E
OPEN CLOSE
REVERSE Searches backward through a disc while it is in play mode. Press repeatedly to
increase speed.
STOP Stops disc play.
ZOOM Zooms in on the picture when playing DVD discs.
OPEN/CLOSE Press this button to open/close the DVD drawer.
Putting Batteries in the Remote
Remove the cover of the battery compartment. Insert two AAA batteries, with the
polarities as indicated, inside the compartment. Replace the cover.
Note: If you are not going to use the remote for a long period of time, remove the
batteries to avoid damage due to leakage.
The Remote Control 9
Using TV Menus
TV Menus
TV Menus let you control picture quality and features available for TV viewing. There is a different menu
system for DVD features, described on page 19.
TV Menu Navigation
1. To bring up the TV menu, press the MENU button.
2. Use the arrow buttons ( / ) on the remote (or the VOL +/- buttons on the front of TV) to highlight a
submenu icon at the top of the menu.
3. Press the / buttons on the remote (or CH +/- on the front of TV) to select the option.
4. Use the arrow buttons ( / ) on the remote (or the VOL +/- buttons on the front of TV) to change
the setting.
5. Press the MENU button on the remote to exit the menu system.
Note: Make sure that the remote control is in the TV mode.
The PICTURE menu allows you make adjustments to your picture settings.
PICTURE
CONTRAST 1
BRIGHTNESS 18
COLOR 50
SHARPNESS 50
TINT 0
COMBFILTER ON
COLOR TEMP NORMAL
CONTRAST Use the / arrow buttons to adjust the contrast between the
light and dark areas of the picture.
BRIGHTNESS Use the / arrow buttons to adjust the brightness of
the picture.
COLOR Use the / arrow buttons to adjust the color intensity
or saturation.
SHARPNESS Use the / arrow buttons to adjust the sharpness of
the picture.
TINT Use the / arrow buttons to adjust the balance between the
red and green levels.
COMBFILTER Turns the comb filter on or off.
COLOR TEMP Provides three color adjustments: Cold for more blue in the picture,
Normal, and Warm for more red in the picture.
10 Using TV Menus
SOUND
MODE AUTO
PRESET USER
BASS 50
TREBLE 50
BALANCE 0
SURROUND OFF
TIMER
SLEEP TIMER 20
Using TV Menus
The SOUND menu
The SOUND menu offers different audio options.
MODE Provides three available audio modes (AUTO/MONO/STEREO/SAP).
PRESET Provides four preset audio settings (USER /SPEECH/THEATER/MUSIC).
BASS Use the / arrow buttons to decease/increase low-pitched sound.
TREBLE Use the / arrow buttons to decease/increase high-pitched sound.
BALANCE Use the /
SURROUND Turns the surround sound on or off.
The TIMER menu
SLEEP TIMER Use the / arrow buttons to turn the TV automatically off after a
given time. Press the arrow button to add 10 minutes to the clock (up
to two hours).
arrow buttons to adjust left/right speaker balance.
The FUNCTION menu
LANGUAGE Selects the language you want the menus to be displayed in.
BACK GROUND Turns the background function (screen saver) on or off (only when
FUNCTION
LANGUAGE ENGLISH
BACKGROUND ON
BLACK STRETCH OFF
NOISE REDUCE OFF
CLOSE CAPTION CC1
BLACK STRETCH Turns the black stretch function on or off.
NOISE REDUCE Turns the noise reduce function on or off .
CLOSE CAPTION Offers eight closed captioned modes, including four text modes.
Using TV Menus 11
using video input channels).
Loading...