RCA RS-1247, RS-1248 User Manual
User’s
Guide
RS-1247
RS-1248
Audio system
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Consumer Electronics could void the
user’s authority to operate this product.
This product complies with DHHS Rules 21 CFR Subchapter J. Applicable at the date of manufacture.
This device generates and uses radio frequency (RF) energy, and if not installed and used properly, this equipment may cause interference
to radio and television reception.
This equipment has been type tested and found to comply with the limits for a Class B Computing Device in accordance with the
specifications of FCC Rules. These rules are designed to provide reasonable protection against radio and television interference in a
residential installation. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception (which you can determine by turning the equipment off and on),
try to correct the interference by one or more of the following measures:
• Reorient the receiving antenna (that is, the antenna for the radio or television that is receiving” the interference).
• Change the position of the unit with respect to the radio or television equipment that is receiving interference.
• Move the unit away from the equipment that is receiving interference.
• Plug the unit into a different wall outlet so that the unit and the equipment receiving interference are on different branch circuits.
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional
suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio TV
Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, DC 20402. Please specify stock
number 004-000-00345-4 when ordering copies.
Safety Precautions
• Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician.
• Warning: Never operate this product with the cabinet removed.
• Do not touch the player with wet hands. If any liquid enters the player cabinet, take the player to a trained technician for inspection.
• This compact disc player uses a laser to read the music on the disc. The laser mechanism corresponds to the cartridge and stylus of a
record player. Although this product incorporates a laser pick-up lens, it is completely safe when operated according to directions.
• Discs rotate at high speed inside the player. Do not use damaged, warped, or cracked discs.
For Your Safety
the plug won’t go into the outlet completely, turn the plug over and try to insert it the other way. If it still won’t fit, contact a
qualified electrician to change the outlet, or use a different one. Do not attempt to bypass this safety feature.
The AC power plug is polarized (one blade is wider than the other) and only fits into AC power outlets one way. If
Service Information
This product should be serviced only by those specially trained in appropriate servicing techniques. For instructions on how to
obtain service, refer to the warranty included in this Guide.
For Your Records
According to some state laws, and in the event that service should be required, you may need both the model number and the
serial number. In the space below, record the date and place of purchase, and the serial number:
Model No. RS-1247/RS-1248
Remote Control No. CRK291B1
Date of Purchase
Place of Purchase
Serial No.
2
WARNING:
OR ELECTRICAL SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
TO PREVENT FIRE
THE LIGHTNING
FLASH AND ARROWHEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER
(OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
Table of Contents
FCC Information ................................................................................ 2
Safety Precautions ....................................................................................................................2
For Your Safety.........................................................................................................................2
Service Information ..................................................................................................................2
For Your Records ......................................................................................................................2
first things first ............................................................................... 4
Unpack the System ...................................................................................................................4
Check for Moisture...................................................................................................................4
Choosing System Location .......................................................................................................4
connections ........................................................................................ 5
Speakers .................................................................................................................................... 5
Antennas...................................................................................................................................5
Power Supply ............................................................................................................................ 5
panel controls................................................................................... 6
using the tuner ................................................................................. 9
using the cd player ........................................................................10
Loading Discs ......................................................................................................................... 10
Basic Operations .................................................................................................................... 10
using the cd player ......................................................................... 11
Programming Play Order ....................................................................................................... 11
Recalling and Editing Programmed Play Order.................................................................... 11
using the cd player ........................................................................ 12
Playing and Loading Discs Simultaneously ........................................................................... 12
Shuffle Play ............................................................................................................................. 12
using the cd player .........................................................................13
Repeat Play ............................................................................................................................. 13
using the cassette decks ...............................................................15
Loading Cassette Tapes.......................................................................................................... 15
Basic Operations ..................................................................................................................... 15
using the cassette decks .............................................................. 16
Automatic Tape Stop ............................................................................................................. 16
Dual Decks Tape Play ............................................................................................................. 16
Recordings .............................................................................................................................. 16
using the Remote control.......................................................... 18
Installing Batteries..................................................................................................................18
Remote Control Operations ..................................................................................................18
display messages in cd mode ...................................................... 21
care & maintenance....................................................................... 22
Troubleshooting tips ................................................................... 24
Index ..................................................................................................... 26
us warranty ..................................................................................... 27
canadian warranty ..................................................................... 28
3
first things first
unpack the system
Unpack your new RS-1247 or RS-1248 audio system and locate all the
accessories. You should have:
• one RS-1247 or RS-1248 main unit;
• one RCA Remote Control (CRK291B1);
• one pair of speakers (different speakers for different models);
• one external AM loop antenna;
• one RS-1247/RS-1248 user’s guide;
• and one safety leaflet.
DISC CHANGER
AUDIO SYSTEM
SHUFFLE PLAY / PAUSESTOP REPEAT
DIGITAL PLL
SYNTHESIZED TUNER
POWER
FM
STANDBY
STEREO
DEMO
MUTLI FUNCTION FLUORESCENT DISPLAY
C
O
E
N
M
T
U
R
L
O
O
L
FUNCTION
PHONES
1
TAPE
PLAYBACK/ RECORD
RECORD PLAY REW F.FWD STOP / EJECT PAUSE PLAY STOP / EJECT
V
PRESET
EQ
TUNING
SUPER
TUNE
MEMORY
BASS
PRESET
STATION
NISM
A
H
C
E
M
P
O
T
S
TO
U
A
C
L
O
E
N
V
E
T
L
IN
UO
RD
O
C
E
R
C
I
T
A
M
UTO
A
C
E
R
H
C
U
O
T
ONE
U
S
G
N
I
T
D
A
R
P
O
E
D
U
B
OPEN / CLOSE
1-2-3 DISC
BAND SELECTOR
FM STEREO
P
L
A
Y
2
>1
B
I
N
G
2
>1
2
TAPE
PLAYBACK
AM loop
antenna
POWER
TUNER
CD
E
R
S
P
E
T
Q
E
L
O
V
M
U
E
T
PLAY REV PAUSE PLAY FWD
TRACK REV STOP TRACK FWD
DISC SKIPREPEAT
RECORD
PRESET
TUNING
VIDEO 1•2
TAPE
V
O
L
SHUFFLE
SRS
SEEK
RS-1247 Speakers
RS-1247/RS-1248
RS-1248 Speakers
main unit
check for moisture
Just as moisture can form on the inside of windows on a cold day, it can also
form on the inside of your audio system causing it to malfunction.
If moisture forms inside the system it may not operate properly. In this case
the best thing to do is to disconnect power to the unit and wait about 30
minutes for the moisture to evaporate.
choosing system location
It is recommended to follow these guidelines when setting up your system:
• Choose a solid, level surface. Don’t place on surfaces like carpet or foam rubber.
• Choose a location away from direct sunlight, radiator , air ducts and sources of heat.
• Avoid locations subject to moisture, mechanical vibration, shock or excessive dust.
• Ensure that the location is adequately ventillated, as it is essential to protect the
unit from internal heat build-up.
For optimal listening:
• Speakers should be placed at least three feet apart and facing the listener .
• Speakers should be placed away from the wall to avoid accentuated bass response.
4
Remote
Control
connections
speakers
If you have purchased our RS-1247, your speakers are identical. If you’ve
selected our RS-1248, you’d find that the physique of the speakers aren’t
identical, but placing either one on the right and the other on the left won’t
matter.
Though the speakers for the two models are different, their connections are
very much the same. To connect a speaker wire either to the terminals of a
speaker or the unit, follow these steps:
1. At the back of a speaker or the unit, press and hold the black tab to open
the (-) terminal, fit in the black speaker wire, release hold.
2. Press and hold the red tab to open the (+) terminal, fit in the red speaker
wire, release hold.
3. Repeat steps 1 to 2 above for connecting to the speakers and the unit.
+ RIGHT – – LEFT +
+ & - Terminals at the
back of the unit
ANTENNAS
This unit comes with two antennas: an AM loop antenna and a FM T -type antenna.
Use the same method of connecting speaker wires to hook the AM loop
antenna.To get better reception, try placing it at various locations.
AM Loop
Antenna
As for the FM T-type antenna, it’s already attached to the unit, simply extend it
to the full length, then place it at various locations to get clearer reception.
power supply
Plug the power cord into an AC power outlet, be sure to match the wide
blade of the plug to the wide slot of the outlet. If the plug doesn’t fit in, try
plugging it the other way, be sure to plug it in completely.
When the unit is off, the STANDBY light comes on showing that the unit is
still plugged to power. To disconnect power completely, unplug the power
cord at the AC power outlet, the STANDBY light goes off.
5
panel controls
VACUUM
FLUORESCENT
DISPLAY
FM STEREO
INDICATOR
POWER
PRESET EQ
CD PLAYER
CONTROL BUTTONS
POWER
STANDBY
STEREO
FM
CD COMPARTMENT
TRAY
DISC CHANGER
SHUFFLE PLAY / PAUSESTOP REPEAT
AUDIO SYSTEM
DIGITAL PLL
SYNTHESIZED TUNER
1-2-3 DISC OPEN/CLOSE
OPEN / CLOSE
1-2-3 DISC
FUNCTION
PHONES
MEMORY/
DEMO
TUNING
BUTTONS
TUNE/PRESET
STATIONS
SUPER
BASS
CASSETTE
TAPE DECKS
CASSETTE
PLAYER
CONTROL
BUTTONS
TUNING
TO
U
A
L
E
V
E
L
RD
O
C
E
R
G
N
I
D
R
O
C
E
R
H
MUTLI FUNCTION FLUORESCENT DISPLAY
TUNE
PRESET
STATION
NISM
A
H
C
E
M
P
O
T
S
SOUND EFFECT
(PRESET EQ)
PRESET
EQ
SUPER
BASS
FUNCTION
PHONES
TAPE
PLAYBACK/ RECORD
RECORD PLAY REW F.FWD STOP / EJECT PAUSE PLAY STOP / EJECT
VOLUME
CONTROL
1
FM STEREO
MEMORY
DEMO
C
I
T
A
M
UTO
A
C
U
O
T
ONE
BUTTON
INDICATORS
M
U
L
O
V
C
O
E
N
T
R
O
C
O
N
T
IN
UO
U
T
A
P
E
D
U
Remote
Sensor
L
S
P
L
A
B
B
I
N
G
BAND SELECTOR
FM STEREO
Y
2
>1
2
>1
2
TAPE
PLAYBACK
Band
Selector
6
panel controls
vacuum fluorescent display
The vacuum fluorescent display (VFD) shows the current status of the unit
such as volume level, playing disc number, playing track number, selected
play mode, radio frequency, selected Preset EQ, etc.
Further explanation of the display messages will accompany the operational
procedures of each function.
Cd player control buttons
These control buttons are for CD player, they function only in CD mode.
cd compartment tray
This tray can store 3 CDs at any one time.
1-2-3 Disc
This button’s function is for rotating the disc tray to change discs with/
without opening the CD Compartment Discs Tray.
open/close
This button is used for opening and closing the CD Compartment Tray.
Fm stereo indicator
This indicator lights when receiving FM radio in stereo mode.
power
To turn on your RS-1247 or RS-1248, press this button. To switch your system
to STANDBY mode, press again, the STANDBY indicator light comes on with
display showing STBY.
preset eq
You can press this button to toggle between 5 preset styles of sound effect
(preset equalizers) modes. You have a selection between Jazz, Rock, Classical,
Techno, and Flat.
function
Press this button to select the 3 functions: Cassette Player, CD Player, and Tuner.
7
panel controls
phones
You can listen to your audio system through a set of headphones (not
included). Take note, when a set of headphones is plugged into the system,
sound output will divert from the speakers to your set of headphones.
Memory/DEMO
In Tuner mode, use MEMORY to store up to 32 preset radio frequencies. In
CD mode, use MEMORY to store up to 32 tracks. In Standby mode, press this
button to enter display Demonstration mode.
tuning buttons
The TUNING + and TUNING - buttons can be used to change radio frequency,
select preset stations or select memory locations during station preset.
tune/preset stations
In Tuner mode, you can store up to 32 preset station frequencies in memory.
SUPER BASS
Select this function to enhance the bass sound effect of heavy-based sound.
cassette tape decks
Your RS-1247 or RS-1248 is equipped with dual cassette tape decks: one for
playback only and one for playback plus recording.
cassette player control buttons
All cassette player operations such as Tape Play, Stop, Rewind, Fast Forward,
Record, and Tape Eject are at the front panel of the system.
volume control
Press + to increase sound level, press - to decrease sound level.
fm stereo button
When the system is in Tuner mode and FM band, you can press this button
and listen to FM radio in stereo mode.
preset eq (sound effect) indicators
When you press on the PRESET EQ button repeatedly the indicators light up
one by one indicating your choice of the type of sound effect.
band selector
To choose either FM or AM radio band, press on this button to toggle
between the two bands (make sure that the system is in Tuner mode).
8
using the Tuner
DIGITAL PLL
POWER
STANDBY
DEMO
FUNCTION
PHONES
FM
STEREO
MEMORY
Your system’s tuner is very much similar to the usual ones that you’d find
in other audio systems. It too has tuning buttons, band selector for
choosing between AM and FM radio stations, FM stereo button for stereo
effects when listening to FM radio broadcast, plus a Memory button for
storing your preset radio frequencies.
Tuner operations
1. If the system is not already turned on, press POWER to turn system on.
2. Press FUNCTION repeatedly until the display shows Tuner.
3. Press BAND SELECTOR to choose your desired radio band: AM or FM.
4. For tuning to stations manually, press TUNE PRESET STATION once
or twice so the display does not show PRESET.
5. Now press either TUNING + or TUNING - to select a radio frequency.
6. When listening to FM radio stations, press FM STEREO for receiving
stereo broadcast.
SYNTHESIZED TUNER
MUTLI FUNCTION FLUORESCENT DISPLAY
TUNING
TUNE
PRESET
STATION
PRESET
EQ
SUPER
BASS
C
O
E
N
M
T
U
R
L
O
O
L
V
BAND SELECTOR
FM STEREO
Preseting stations
1. Press BAND SELECTOR to choose your desired radio band: AM or FM.
2. If the display shows PRESET, press TUNE PRESET STATION once so that
the display no longer shows PRESET.
3. Press either TUNING + or TUNING - to choose a radio frequency.
4. Press MEMORY to enter program mode, then press either TUNING + or
TUNING - to select a memory location. The display flashes PRESET, press
MEMORY within 5 seconds to set that frequency into the memory location.
5. Repeat steps 1 to 4 in this section to set up to 32 stations into memory.
Recalling Preseting stations
1. Press TUNE PRESET STATION once or twice so the display shows Preset.
2. Press either TUNING + or TUNING - to choose one of the preset stations.
9
Loading...