RCA RNSMU5036-B Instruction Manual

Model:RNSMU5036-B

Important Safety Instructions 2 Safety Information 3

Preparations 5

What is Included

5 5 6 7 8 8 8 9

11 12 13 14 14 15 15 16

18 19 19 20 21

21 22 22

Front View

Rear View Installing the Stand Removing the Stand for Wall-Mounting Wall-Mounting Screws

Wall mount installation

Remote Control

Connecting External Devices 10 Customizing TV Settings 11

Initial Setup Streaming My Media Viewing Photos Listening to Music Watching Videos TV Settings General Picture Audio Network Channel Time Lock AP

PC Formats Video Formats

P settings

Source

Parental Control 23

Troubleshooting

Maintaining 30

OTT APP Service

FCC Notes 4

Display Mode 26

26 27

28Specification

Personal Safety Notice 4

CONTENTS

• Read these instructions – All the safety and

operating instructions should be read before this product is operated.

• Keep these instructions – The s afe ty and

operating instructions should be retained for future reference.

• Heed all warnings – All warnings on the

appliance and in the operating instructions should be adhered to.

• Follow all instructions – All operating and use

instructions should be followed.

• Do not use this apparatus near water – The

appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not install near any heat sources s uch

as radiators, heat registers, stoves, or other

• Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades with one wider than the other. A groundingtype plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Servicing is required when the apparatus has been damaged in any way, such as the powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been e xposed to rain or moisture, does not operate normally, or has been dropped.

• Please keep the unit in a well-ventilated environment.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed

such as vases should not be placed on apparatus.

WARNING: The batteries shall not be exposed to

WARNING: The main plug is used as disconnect

device, the disconnect device shall remain readily operable. WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-

personnel.

This lightning flash with arrowhead symbol within an equilateral triangle

is intended to alert the us er to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an

equilateral triangle is intended t o

alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

This equipment is a Class II or double

insulated electrical appliance. It

has been designed in such a way that it does not require a safety connection to electrical earth.

This product contains electrical or electronic materials. The presence of these materials may,if not disposed of properly, have potential adverse effects

on the environment and human health. Presence of this label on the product means it should not be di

sposed of as unsorted waste and must be collectedseparately. As a consumer, you are responsible for ensuring that this product is disposed of properly.

The terms HDMI and HDMI High

and t he HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc in the United States and other countries.

RISQUE DE CHOC ELECTRIQUE NE

PAS OUVRIR

Licensing and Patent Information

This WESTINGHOUSE product may be covered by one or more U.S. and foreign patents and patent applica tions.

IMPORTANT SAFETY INSTRUCTIONS

To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.

• To prevent overload, do not share the same power supply socket with too many other electronic components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire, which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long period, or when the batteries are exhausted.

•

• For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.

• Install only new batteries of the same type in your product.

• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak.

• Do not mix old and new batteries.

• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries.

• Batteries should be recycled or disposed of as per state and local guidelines.

• Do not attempt to recharge disposable batteries.

• Do not short circuit battery terminals.

• Keep away from children.

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2'') clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the remote control.

•

• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong,

outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

• operate normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way.

• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.

• Always connect your television to a power outlet with protective ground connection.

•

• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

•

• Attention shouId be drawn to the environmental aspects of battery disposal.

SAFETY INFORMATION

FCC NOTES

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

PREPARATION

What is Included?

Front View

VOL-

VOL+

SOURCE

•

PREPARATION

Wall mount installation

(200mm x200mm)

7.9"

PREPARATION

Rear View

（

ARC)

Installing the Stand

1. surface to avoid damaging or scratching.

2. Fix the Left Base Stand to the main unit using 3pcs provided screws.

3. Fix the Right Base Stand to the main unit using 3pcs provided screws.

Removing the Stand for Wall-Mounting

1. surface to avoid damaging or scratching.

2. Untighten the 6 pcs screws holding the stand assembly and remove them.

3. Attach the wall-mount bracket to the TV using the mounting holes on the back of the TV. Mount this TV according to the instructions included in the wall-mount bracket.

Wall-Mounting Screws

• Mount the VESA bracket using 4*M6*10 isometric threaded screws (not included).

accordance with the installation instruction.

WARNING: Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be acoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.

• Only using furniture that can safely support the television set.

• Ensuring the television set is not overhanging the edge of the supporting furniture.

• Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.

• Attention should be drawn to the environmental aspects of battery disposal.

• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.

PREPARATION

Remote Control

PREPARATION

1. : Switch the TV between On and Standby

mode.

2. : Mute and restore TV sound.

3. 0~9: Select a program.(ATV/DTV mode)

4. : Enter multiple program channel number

such as 2-1.

5. : Return to the previous viewing channel.

6. APP: Press to select the desired APP.

7. MENU: Display the main menu.

(VUDU and Pandora are availble in USA only)

8. SOURCE: Select among the different input

signal sources:TV/HDMI1/HDMI2/HDMI3/USB/ VGA/AV/Component.

: Allows you to navigate the on

screen display menus and adjust the system settings to your preference.

10. OK:

11. RETURN: Return to previous menu.

12. EXIT: Exit the on screen display menu. ASPECT: Select the aspect ratio 13.

TV: Press to turn to TV mode.

14. VOL+/-: Adjust the volume.

15. CH / : Select the channel.

16.

17.

: Stop the playback.

Freeze the picture.

Display the favorite channel list.

Add or delete Favorite channels.

18.

: Skip to the beginnin g of the previous

chapter/track/photo.

19.

: Skip to the beginning of the next chapter/

track/photo.

20.

: Reverse playback rapidly.

21.

: Advance playback rapidly.

22.

23.

: Start playback or pause.

24.

25.

P.MODE: Select picture mode: dynamic/movie/

user/standard.

S.MODE: Select sound mode: standard/music/ movie/user.

26.

CH.LIST: Display program list.

27. CC: Closed Caption selection: ON/OFF/CC On

Mute.

such as the current channel and input source.

28.

V-CHIP:

INFO:

FREEZE:

ADD/ERASE:

FAV:

Set up parental control.

Display the present screen information

29. MTS: Switch among different audio channels: STEREO/MONO/SAP.

30.

settings:standard/wide/wide zoom/zoom.

31.

32.

Depending on the country where the TV is installed, certain apps may not be available. The quick launch buttons on the remote control associated with those apps will therefore not work. All other functionalities of the remote will work as designed.

IMPORTANT NOTICE:

0605

08 09

003A41

5C5D

45 4B

16 0D

175B13

57 1A 56

1859404F

15 54 50

444347

Remarks:The Universal Remote code is 027D Formate:NEC

CONNECTING EXTERNAL DEVICES

HEADPHONE

USB

Y/VIDEO

AUDIO

AV IN/COMPONENT

HDMI3

(ARC)

HDMI1 HDMI2

PC AUDIO RF

LAN

OPTICAL

VGA

USB

HDMI2 HDMI1

PC AUDIO RF

LAN

OPTICAL

VGA

USB

Initial Setup

Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate.

In Standby Mode, press the

button on the main unit or on the remote control to

turn the TV on. The red LED indicator will turn blue.

Arrow

buttons to highlight and select your desired mode and press OK

CUSTOMIZING TV SETTINGS

When this television is connected to the internet, it will collect limited, non-personally identifiable information which will be sent to MStar Semiconductor Inc. (“MStar“) and its service providers. Certain of this information may be aggregated and shared with third party partners for business and product analysis purposes. By clicking “Accept” you acknowledge and agree to the collection and shareing of this information as described in more detail in the “ View Additional Details ” section, as well as the automatic download of essential firmware/software updates.

DATA COLLECTION AND FIRMWARE UPDATES NOTICE

[ ACCEPT ][ VIEW ADDITIONAL DETAILS ]

Use the UP and DOWN arrows on your remote control or TV keypad to select your local time zone.

SCANNING CHANNELS

Please note if this Notice is translated in a

CUSTOMIZING TV SETTINGS

STREAMING

NETFLIX

Enjoys TV shows & movies streamed instantly over the Internet.

YouTube YouTube your way on the best screen in your house.

VUDU

Discover, watch and collect the latest movies and TV shows in high quality 1080p. Free to sign up. No subscriptions, late fees or commitments.

Pandora

Free personalized radio that offers effortless and endless music enjoyment and discovery. Just start with the name of one of your favorite artists, songs, genres or composers and Pandora will do the rest. It’s easy to create personalized stations that play only music you’ll love

AccuWeather

Displays the current weather conditions and the temperature anywhere in the world in centigr

ade or

Fahrenheit.

Press MENU to display the main interface, then use the Arrow buttons to highlight STREAMING and press OK to comfirm, Use theArrow buttons to cycle among

(VUDU and Pandora are availble in

USA only)

CUSTOMIZING TV SETTINGS

MY MEDIA

Press MENU button to display the main interface, then use the Arrow buttons to highlight MY MEDIA and press OK to confirm. Select among Photos, Music and Video to view what you like. Note: Portable drives should be inserted before entering MY MEDIA menu.

CUSTOMIZING TV SETTINGS

• Use the Arrow buttons to highlight the

PHOTOS option and press OK, then it will

to enter.

• After entering PHOTOS, use the Arrow

buttons to select the picture file and press OK to enter.

• buttons to select the desired picture, then press the playing button to display.

•• When the picture is playing, the picture Function Bar will be displayed. Use the Arrow buttons to select the desired function available on the bar.

VIEWING PHOTOS

LISTENING TO MUSIC

• Use the Arrow buttons to highlight the

MUSIC option and press OK, then it will

to enter.

• After entering MUSIC, use t he Arro w buttons to select the picture file and press OK to enter.

• buttons to select the desired music, then press the playing button to display.

• When the music is playing, the music Function Bar will be displayed. Use the Arrow buttons to select the desired function available on the bar.

Directories:10

Files:0

Total:10

RETURN

Directories:10

Files:0

Total:10

RETURN

Directories:10

Files:0

Total:10

•

Support JPEG,BMP,PNG

Support WMA,DTS,MP3,MPEG,AC3,AC3 _PLUS,AAC,PCM,ADPCM

CUSTOMIZING TV SETTINGS

• Use the Arrow buttons to highlight the

VIDEO option and press OK, then it will

to enter.

• After entering VIDEO, use the Arrow buttons to select the picture file and press OK to enter.

• buttons to select the desired video, then press the playing button to display.

•• When the video is play ing, the video Function Bar will be displayed. Use the Arrow buttons to select the desired function available on the bar.

WATCHING VIDEOS

TV SETTINGS

Press the MENU button on the main unit or on the remote control to display the main interface. Then use the Arrow buttons to highlight TV Settings and press OK to enter. Then use the Arrow buttons to cycle among the following options and select the desired one to enter.

Directories:10

Files:0

Total:10

Support MPEG4,MJPEG,H264,RM,TS, MPG,VC1,AVS,FLV

CUSTOMIZING TV SETTINGS

GENERAL

• Press MENU to display the main interface, use the Arrow buttons to highlight TV SETTINGS and press OK to conrm. Then use the Arrow buttons to select GENERAL to enter and adjust each option setting.

MENU LANGUAGE

Select the menu language among English, Français or Español. The default on-screen menu language is English.

TRANSPARENCY

Select to turn On/O󰀨 transparency

function.

ZOOM MODE

Select zoom mode: Wide/Wide Zoom/Zoom/Standard/

Just Scan(at HDMI mode)/Dot by Dot(at VGA mode). Note: With a di󰀨erent input source, the zoom mode options may di󰀨er.

VGA SETTINGS

Adjust advanced option’s setting: H-POS, V-POS, Clock, Phase or Auto. (only available in VGA mode)

CLOSED CAPTION

CC mode On/O󰀨/CC on Mute.

Basic Selection

CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4,OFF.

Advanced Selection

Service1/Service2.../ Service6.

Option

Mode, Font Style, Font Size, Font Edge Style, Font Edge Color, FG_ Color, BG_ Color, FG_ Opacity, BG_Opacity.

CUSTOMIZING TV SETTINGS

OTHER SETTINGS

INLINK: LINLINK CONTROL,DEVICE POWER OFF,TV Auto Power On,AUDIO RECEIVER,LINLINK DEVICE LIST,ROOT MENU. Accessibility TTS：Voice Guide,VERBOISITY,RATE SUPPORT,PITCH SUPPORT,VOICE,Video Description

DLC:Select to turn On/O󰀨 DLC.

RESTORE DEFAULT

Restore the TV to factory default settings.

SOFTWARE UPDATE (USB)

Software Update In the case of a USB device.

VIEW END-USER LINCENSE AGREEMENT

Choose "I have read the user agreement" to select Accept or Decline .

SOFTWARE _ UPDATE (NETWORK)

Software Update In the case of a NETWORK device.

SOFTWARE INFORMATION

Check Module Software Version NetReady Device ID.

How to turn the Text-to-Speech (TTS) voice guide on or o󰀨?

• Press “MENU” key on the remote control

• Turn the GENERAL menu.

• Select “OTHER SETTING”

• Select “Accessibility”

• Select “Voice Guide” and turn it on or o󰀨.

CUSTOMIZING TV SETTINGS

PICTURE

PICTURE MODE

Cycle among picture modes: Dynamic/Standard/Movie/User. Alternative: Press P.MODE button on remote control to set the picture mode directly.

BRIGHTNESS

Increase or decrease the amount of white in the picture.

CONTRAST

Adjust the dierence between light

and dark levels in the pictures.

COLOR Control the color intensity.

SHARPNESS

Adjust crispness level in edges between light and dark areas of the picture.

TINT

Adjust the balance between red and green levels.

COLOR TEMPERATURE

Cycle among color temperatures: Normal/Warm/COOL.

ADVANCED OPTION

Set the following options: Noise Reduction: Reduce the noise level of the connected device: OFF/ WEAK/MEDIUM/STRONG.

White Balance: To set the di󰀨erent

options of white balance. Red Gain/Green Gain/Blue Gain/Red

O󰀨set/Green O󰀨set/Blue O󰀨set.

Backlight: To set the value of backlight.

• Press MENU to display the main interface, use the Arrow buttons to highlight TV SETTINGS and press OK to conrm. Then use the Arrow buttons to select PICTURE to enter and adjust each option setting.

+ 44 hidden pages

RCA RNSMU5036-B Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual