RCA RNSM4504 Instruction Manual

Model: RNSM4504

Sound Menu
Function Menu

Network
Setting

Internet

Digital Media
Player

4

• Connect the power cord to the power socket after you have completed all the
physical connections. At this stage, the TV will enter Standby Mode and the red
LED indicator will illuminate.

• In Standby Mode, press the

button on the main unit or on the remote control to

turn the TV on. The red LED indicator will turn off.

• The first time you turn the TV on, it will go into the Setup Wizard. Press

buttons to select your desired mode and press ENTER

OSD language

Config Menu language.

ENTER

Select

English

French

Español

Country

Select the country.

US

Canada

Mexico

Select

ENTER

BACK

Return

Home or Store

Select where you will use the TV.

Store

Home

ENTER

Select

BACK

Return

6

Time Zone

Select the time zone.

Eastern

Central

Pacific

ENTER

Select

BACK

Return

7

DST

Select Daylight saving time.

On

Off

Return

ENTER

Select

BACK

8

9

Return

ENTER

Select

BACK

YES

Skip

Network Configuration

Do you want to set Network?

10

Return

ENTER

Select

BACK

WIFI

LAN

Network

Select network scan type.

5

Select

Clock

Select to set the clock.

Manual

Auto

ENTER

1 Input Setup

Press Input key on the remote control to enter "INPUT SOURCE" menu. There are
these options for you to select: "TV", "AV","Component", "HDMI1", “HDMI2", “USB".

Use /key to select a input source and press ENTER key to confirm.

2 Channels Selection

There are four ways to select channel:

1) Using number keys, and ENTER keys on the remote control
to select channel directly.
To select channel 90, press
When you use the number buttons, you can directly select channels that were either
erased or not memorized.

2) Using CH

∧/∨ key on the remote control or on your TV to select channel.

When you press the CH

∧/∨ key, the TV changes channels in sequence. You will see

all the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.

3) Press key to return to previous channel, press it again to return to
current channel.
To quickly switch between two channels that are far apart, tune to one channel, then use
the number keys to select the second channel. Then use the button to quickly
alternate between them.
is not activated if no channel has been changed after TV turning on.

4) Select channels from "Channels List" or "Favorite List".
Press List key to choose from "Channel List" menu.

3 Volume Adjustment and Mute Setup

Volume adjustment
Press VOL+/- key on the remote control or the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOL+/- key:

To increase the volume, press VOL+ key;
To decrease the volume, press VOL- key;

Mute

Press “Mute” and the sound cuts off. The MUTE icon will appear in the lower-right
corner of the screen.
To resume sound, press the “ Mute” button again, or simply press the VOL+ key.

4 Current Channel Information

Press “INFO” key on the remote control to view current
channel information, the indications of channel
information are listed in the following table.

Press “EXIT” key on the remote control to exit this OSD.

01/ 012005 08:

Moving picture 480i 4:3480i

08:30 09:30

40

14.1

ATSC-1

1. Press MENU key to display the main menu on the
screen.

2. Press

▲/▼ key to select "Sound" option.

3. Press

► key to enter "Sound" submenu.

4. You can also press the SOUND key on the remote
control to select one of the sound.

Sound Mode

You can select the type of the special sound effect
to be used when watching a given broadcast.
Your TV has five sound settings (“Standard”, “Music”,“Movie”,
“Sports”,“User”) that are preset at the factory.

1. Press

▲/▼ key to select "Sound Mode" option.

3. Press

▲/▼ key to select one sound mode.

Standard: Selects the normal sound mode.
Music: Provides clear and live sound for music.
Movie: Provides live and full sound for movies.
Sports: Emphasizes bass over other sounds.
User: Selects your custom sound settings.

Balance

If the volumes of the left speaker and the right speaker are not the same, you can adjust
the "Balance" to suit your personal preference.

1. Press ▲/▼ key to select "Balance" option.

2. Press

◄/► key to decrease or increase the value of the item.

AVL

Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every time the channel is changed. “AVL” automatically adjusts the volume of the
desired channel by lowering the sound output when the modulation signal is high or by
raising the sound output whenthe modulation signal is low.

1. Press

▲/▼ key to select “AVL” option，press ENTER/► key to enter submenu.

2. Press ▲/▼ key to select “On” or “Off”.

Surround Sound

This is used to turn on surround sound to gain better sound effect.

1. Press ▲/▼ key to select "Surround Sound” option,press ENTER/► key to enter submenu.

2. Press ▲/▼ key to select “Surround” or “Off”.

Video Description

1. Press ▲/▼ key to select "Video Description” option,press ENTER/► key to enter submenu.

2. Press ▲/▼ key to select “On” or “Off”.

2. Press “” or "ENTER" key to enter submenu.