RCA NS-D7PDVD User Manual
Quick Setup Guide
NS-D7PDVD 7" Dual Screen Portable DVD Player
Congratulations on your purchase of this high-quality
Insignia product. Your NS-D7PDVD represents the state
of the art in personal DVD player design and is
designed for reliable and trouble-free performance.
Package contents
• 7" main DVD player
• 7" extra monitor
• Mounting straps (2)
• Travel case
• Headphones (2)
• Remote control with battery
• AV cable (for TV)
• AC adapter (for wall outlet)
• DC adapter (for car)
• AV/DC cable (for connection between the 2 screens)
• Quick Setup Guide
Features
DVD player
# COMPONENT
1 Open knob
2 Stand
3 Headphone jack
4 IR sensor
5 SETUP button
6 (STOP) button
7 (PREV) button
8 (NEXT) button
9 Navigation controls
10 MENU
11 POWER indicator
12 On/O
13 AV OUT jack
14 DC OUT jack
15 VOL control
16 DC IN jack
DESCRIPTION
Press to open the disc tray.
Pull out to set you player on a desk or table.
Plug headphones into this jack. Note: When headphones are plugged in
the internal speakers are muted.
Receives signals from the remote control. Do no block.
Press to open or close the Setup menu.
Press to stop disc playback.
Press to go to the previous chapter, track, or scene during disc playback.
Holding it down for over one second will duplicate the function of fast
reverse on the unit.
Press to go to the next chapter, track, or scene during disc playback.
Holding it down for over one second will duplicate the function of fast
forward on the unit.
See “Player navigation controls” on the right.
Press to open the root or title menu on a disc.
Lights when your player is turned on.
Slide to turn your DVD player on or o.
Connect the extra monitor to this jack using the AV/DC cable. Or connect
to a remote monitor, TV or amplier to this jack using supplied AV cable
and RCA cable (not supplied)
Connect the extra monitor to this jack using the AV/DC cable.
Rotate this knob to adjust the volume.
Connect to AC adapter (for wall outlet)) or DC adapter (for car)
Extra monitor
# COMPONENT
1 On/O
2 Brightness +/–
3 WIDE button
4 VOL control
5 Headphone jack
6 AV IN jack
7 DC IN jack
8 Stand
DESCRIPTION
Slide to turn the extra monitor on or o.
Rotate to adjust the brightness.
Press to switch between a 16:9 and 4:3 picture size (aspect ratio).
Rotate this knob to adjust the volume.
Plug headphones into this jack. Note: When headphones are plugged in the
internal speakers are muted.
Connect the AV OUT jack on your DVD player to this jack using the AV/DC cable.
Connect the DC OUT jack on your DVD player to this jack using the AV/DC cable.
Pull out to set your player on a desk or table.
Player navigation controls
CONTROL
OK/
DESCRIPTION
Press to move up in a list or menu.
Press to move down in a list or menu.
Press to move left.
Press to move right.
In menu mode, press to conrm a selection.
In playback mode, press to play or pause a disc.
Setting up your player
To install your player in a vehicle:
1 Slide the support strap through the slot on the back of your player
or the extra monitor.
2 Place the strap around the headrest of one of the vehicle’s front
seats.
3 Center your player or the extra monitor in the middle of the
headrest, then buckle the strap securely.
R
E
W
O
P
F
F
O
N
O
N
I
C
D
To connect to a 12V car power outlet:
1 Plug one end of the car power adapter into the DC IN jack on the
side of your player.
2 Plug the other end of the adapter into a 12V car power outlet or car
cigarette lighter socket.
3 Using the AV/DC cable, connect AV O ut and DC OUT on the DVD
player to AV In and DC IN on the extra monitor.
4 Turn on your player.
Extra monitor DVD player
To connect to AC power:
1 Plug one end of the AC to DC power adapter into the DC IN jack on
the side of your DVD player.
2 Plug the other end of the adapter into an AC outlet.
IR
STOP
OK
Power outlet or
cigarette lighter socket
Connecting a TV or monitor
You can connect your DVD player to a TV or monitor so you can watch
DVDs on the TV or monitor.
To connect a TV or monitor:
1 Plug the end of the supplied AV cable that has one black connector
into the AV OUT jack on your DVD player.
2 Plug the connectors on an RCA cable (not included) into the
connectors on the other end of the supplied AV cable. Make sure
that the colors on the connectors match.
3 Plug the other end of the RCA cable into the AV jacks on the TV or
monitor. The white connector goes into the left audio jack. The red
connector goes into the right audio jack. The yellow connector
goes into the video jack.
TV
White=left audio
Red=right audio
or
Yellow=video
Monitor
Using your DVD player
Playing a DVD or audio CD
Note: Most DVDs and your DVD player have region codes that help
control illegal distribution of DVDs. The region code for your player is
1. You can only play DVDs with a region code of 1 or ALL. The region
code for a DVD is printed on the DVD or the DVD packaging.
1 Make sure that your player is connected to power.
2 Slide the ON/OFF switch to the ON position.
3 Press the Open ( ) knob. The disc tray opens.
4 Place a disc, label side up, in the disc tray, then close the tray. The
disc starts playing automatically.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply within the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC warning
Changes or modications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user’s authority to operate this
equipment.
Important safety instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including ampliers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug.
The wide blade is provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specied by the manufacturer.
12 Unplug this apparatus during lightning storms or when unused for long
periods of time.
13 Refer all servicing to qualied service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14 To reduce the risk of re or electric shock, do not expose this device to rain,
moisture, dripping, or splashing, and no objects lled with liquids, such as
vases, shall be placed on it.
15 The wall plug is the disconnecting device. The plug must remain readily
operable.
16 Batteries should not be exposed to excessive heat such as sunshine, re, or
the like.
One-year limited warranty
www.insigniaproducts.com
Contact Insignia:
For customer service, call 1-877-467-4289
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered
in some countries. All other products and brand names are trademarks of their respective owners.
ENGLISH 10-1307
Loading...