RCA F32674, F27679, F36674ET User Manual

LJSERIS

IDE

WARNING

To reduce the risk of fire or

shock hazard, do not expose this TV to rain or moisture.

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside.

Refer servicing to qual fled service personnel.

This symbol indicates

"dangerous voltage" inside

the product that presents a

risk of electric shock or personal injury.

This symbol iindicates

important instructions

accompanying the product.

Caution: To reduce the risk of electric shock, match wide blade of pluq to wide slot., fully insert.

Attention: Pour _viter les <:hocs_lectriques, introduire la lame la plus large de la fiche dans la borne

correspondante de la prise ___tpousser ju'.sq_ au fond.

Refer to the identification/rating label located on the back panel of your product for its proper operating voltage.

FCCRegulations state that unauthorized changes or modifications to this equipment may void the user's authority to operate it.

If fixed (non-moving) images are left on the ,screenfor long periods, they may be permanently imprinted on the screen. Such images include network Iogos, phone numbers, and video games. This damage is not covered by your warranty. Extended viewinc! of channels displaying these images should be avoided.

Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian

Electrical Code, Part 1) which provides guideiines for proper grounding and, in particular, specifies that the cable qround shall be connected to the grounding system of the building as close to the point of cable entry as practical.

VCR Plus+, PlusCode and GUIDE Plus+ are trademarks of Gemstar

Development Corporation. IV GUIDE is a trademark of TV Guide Financial, Inc. The VCR Plus+ and TV GUII_E Plus+ systems are manufactured under licen_._efrom Gemstar DevelopmentCorporation

and VCR Index Systems B.V., respectively.

FI R, ST TH INGS FIRST ....................................... 3

Connecting your TV ....................................................... 4

TV Only ..................................................................... 4

TV with other Components ..................................... 4

TV GUIDE Plus+ Controller ...................................... 5

USING THE MENU SYSTEM ...... ..................... 7

"The Menu Rule: Point and Select ................................. 8

What is Point and Select? ........................................ 8

Menus and Control Panels .......................................... 10

Menus ..................................................................... 10

Control Panels ........................................................ 11

Sliders ...................................................................... 11

Choice Lists ............................................................. 12

Numeric Entry ......................................................... 13

TV GUIDE Plus+ Menus .......................................... 14

INTE RACTIV E SETU P ..................................... 15

Entering Setup ............................................................. 16

Select a Language ....................................................... 16

Auto Channel Search ................................................... 16

TV GUIDE Plus+ System ............................................... 17

Set the Time ._............................................................... 23

Set the VCR1 Channel ................................................. 24

Set the DVDNCR2 Channel .......................................... 25

Set the SAT/CABLE Channel ........................................ 26

Label the Channels ...................................................... 27

PROGRAMMING TH E REMOTE .................. 29

Programming the Remote .......................................... 30

To Control a VCR .................................................... 30

To Control a DVD Player or Laserdisc Player ........ 32

To Control an RCA Audio Device: ......................... 32

To Control a satellite Receiver or Cable Box ........ 33

Using the Remote to Control a Device ....................... 33

TOUR OF THE TV ........................................... 35

Remote Buttons ........................................................... 36

Back Panel .................................................................... 38

Front Panel. .................................................................. 40

Channel Marker ............ ............................................... 41

QUICK REFERENCE ........................................ 43

Audio Menu ........................................ ...: ..................... 44

• Picture Quality Menu .................................................. 45

Screen Menu ................................................................ 46

Channel Menu ............................................................. 47

Time Menu ................................................................... 49

Parental Controls Menu .............................. ................ 50

TV GUIDE Plus+ Menu ................................................. 51

Setup Menu ........... ........................................... :.......... 52

ADVANCED FEATURES ................................. 53

TV GUIDE Plus+ Operation ..................... :.................... 54

Surf Menu ............................................................... 54

Next Menu .... ....................... ................................ ... 55

Scan Menu ..................... ........... :............................. 55

Sort Menu ............................................................... 56

One-Button Recording ........................... ;............... 57

PIP (Picture-in-Picture) Operation .............................. 58

Two Tips for Using PIP Buttons... ........................... 59

Choosing an Audio Processor ..................................... 60

Choosing an audio prOcessor from the remote ... 60

Closed Captioning .......... ................................... .......... 61

To display Closed Captioning ................................ 61

Closed Captioning Modes ...................................... 62

On-screen Program Details ......................................... 63

APPENDIX A: TV CONNECTIONS ............... 65

APPENDIX B: OTHER COMPONENTS ........ 76

APPENDIX C: TROUBLESHOOTING ............ 78

APPENDIX C: TROUBLESHOOTING ............ 79

APPENDIX D: LIMITED WARRANTY ........ 80

APPENDIX E: CARE AND CLEANING .......... 81

ACCESSORIES .............. _......... :........................ 82

INDEX ............................................................. 85

H I, I'M ROGER.

I wrote this manual to help you get the most from your TV. I know you expect a lot from your _J, so I designed this user manual to give you the information you need.., when you need it.

FIRSTTHINGS FIRS'["

READ THE FIRST FOUR CHAPTERS

The manual is designed to get you started

quickly.., and let you catch up on the details

when you get a chance. The first four sections of the manual will get your TV up and running.

You'll learn how to use the menu system, run the

interactive setup routine and program the

remote.

]he rest of the manual gives you the specifics: a

tour of the TV, a quick reference guide, details

on the TV GUIDE Plus+ system, advanced

features, and appendices.

Well... if your TV's out of the box, let's get

started. First things first.

i , i

r Check out the notes I've added 1 / throughout the manual. I've got some

| great tips that will help you get the most _rom your TV.

STEP 1

Unpack the TV. Make sure to locate the remote control and Connections Foldout.

Important Stand Information

CAUTION: Choose the location for YOUrTV carefu{ly. Take

precautions that the stand or other furniture the TV is placed on

is properly located (see Important Safeguards sheet) and of adequate size and strength to prevent the TV from accidentally

being tipped over, pushed off, or pulled off. This could cause damage to the TV and/or personal injury.

STEP 2: CONNECTING YOUR TV

If you're only going to connect the TV to your home antenna or cable system, use the "TV Only" connection shown below. If you're going to connect the TV to a VCR, satellite receiver, DVD player or other component, look at the Connections Foldout. The

Connections Foldout details recommended connection schemes for hooking up the TV to a cable box or antenna, one or two VCRs, a laserdisc player, and a satellite receiver.

TV ONLY

This is a basic connection from an antenna or cable system to your TV. Connect the cable as shown. If you have a VCR or other components to connect to the TV, skip to the top of the next page.

TV WITH OTHER COMPONENTS

Use the Connections Foldout to connect your TV to a VCR, DVD player, and/or satellite receiver. After connecting your TV and other components, proceed to the next step. See Appendix A for detailed information about using each of these connections.

If your components don't match those shown on the foldout, or if

you prefer a different connection, see your dealer or specific

component user manuals.

TV GUIDE PLUS+ CONTROLLER

The TV GUIDE Plus+* controller allows direct control of a cable box and VCR using a pair oflR (infrared) controllers.

• Plug the TV GUIDE Plus+ controller into the VCR CONTROL jack on the back of the TV.

° Affix the IR controllers directly over the IR remote sensors on

your.cable box and VCR.

Back of TV

Remote

Sensors_

Connect IR controllers to the infrared remote

sensors on your cable box and VCR

STE P 3

Plug in the TV.

Plug the end into the wall outlet, matching the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely.

/ II I_\ I _ It \

| II PI\

\_A'J ',

* GUIDE Plus+ is a trademark of Gemstar Development Corporation.

-IV GUIDE is a trademark of TV Guide Financial, Inc.

Locating the IR (infrared) Remote Control Sensor on

Your Cable Box or VCR The IR controllers must be affixed

directly over 'the IR remote sensors on your cable box or VCR.

Some cable boxes and VCRs label the IR sensors; others do not. If the sensors are labeled, affix the IR controllers directly over them.

IR Remote Sensor

For those that do not label the IR sensor, you need to use the cable box

or VCR's remote to locate the sensor before affixing the IR controllers.

1. Hold the remote control so that it is touching the front of the cable

box or VCR.

Slowly rnc,ve the remote over the

front of tF_ecable box or VCR

while pressing the remote's POWER button on and off

3. When the cable box or VCR turns off or on, you've located the sensor.

You should test the IR controllers

after setting up the TV GUIDE Plus+ system. Temporarily attach the IR controllers with clear tape to the spots where_you think the sensors are located. After determining that the controll,ers are working correctly, affix them permanently.

, i

STEP 4

Put batteries in the remote.

• Remove the battery compartment cover from the back of the remote.

Insert batteries as shown, matching the + and - ends of each battery in the compartment.

Replace the cover.

STEP 5

Turn on the TV.

Press TV on the remote, or press POWER on the TV itself.

STEP 6

Read the next section, Using the Menu System, which is a brief overview of the basic rules for getting around in the menus.

STEP 7

Proceed to section three, Interactive Setup. The interactive setup routine walks you through the steps needed to fully configure

the TV. The first steps ask youto select your preferred language for the menu system and to begin the auto channel search, which

puts available cable TV or antenna signals into the TV's memory.

You can skip any of the steps and return to them later.

REVERSE PLAY FORWARD

<31>[>

REC'VC_÷ STOP PAUSE

r-_ r-i--I [,,-in

INFO CH. SKIP

MUTE CH- GO BACK

FAVe_NPUT ANTENNA

0 00 0

<1....D

GUIOE

r• .!

ONE RULE TO REMEMBER

You control and customize the TV by making

changes to various control panels in the menu system. The great thing is, you only need to know

one rule: point and select.

USING THE MENU SYSTEM

THE MENU RULE: POINTAND SELECT

You only need to know one rule to use the on-screen menus and control panels: point and select.

WHAT IS POINT AND SELECT?.

The point and select method has two steps.

1. Point to a menu item using the MOVE arrows on the remote.

To point up or down, press the up or down arrows. To point left or right, press the left or right arrows.

2. Select a menu item by pressing MENU-SELECT.

Selecting an item tells the TV's menu system to go ahead and make the change or go to a,place you have indicated.

For example, to select the Channel menu from the Main menu:

1. Press MENU to bring up the Main menu.

2. Point to Channel by pressing the down arrow until the word Channel is highlighted.

"IV viewi_lg.

!3. Press MENU to select Channel. The Channel menu comes up.

Point to Exit and press MENU to return to the Main menu. Point to Exit and press MENU to leave the menu system and

return to TV viewing. If you ever want to leave the menu system, press CLEAR.

Once you know how to point and select your way through the menus, you can apply this rule in the control panels, which do the real work in the menu system.

MENUS AND CONTROL PANELS

There are three parts to the menu system: menus, control panels,

and the TV GUIDE Plus+ system. But before you can use control

panels or the TV GUIDE Plus+ system, you first have to move

through at least one menu--the Main menu.

MENUS

The first menu is called the Main menu. To bring up the Main

menu:

1. Press MENU on the remote or front panel:

Menus take you to another menu or a control panel. There

are two ways to make a choice in a menu: Point and select with the MOVE arrows and MENU. Press a number button on the remote. For example, in the

Main menu press 3 to go straight to the Screen menu.

Exiting a menu

There are three ways to exit a menu:

• Point to Exit and press MENU.

• Press 0 on the remote. Press CLEAR. The on-screen displays are cleared from the

screen and you are returned to TV viewing.

Feel free to explore tlhe menu system. If you're ever unsure where you are in

the menu system, or you're just plain tired of exploring, press CLEARto remove 'the menus from the screen

and start over again.

CONTROL PANELS

(-ontrol Panels do the work in the menu system: it's where you

choose a setting, enter a number, or adjust a level such as tint or

brightness. There are three kinds of control panels: sliders, choice flists,and numeric entry.

Sliders

Sliders are used to make adjustments to a particular control.

For example, to adjust the TV's contrast:

1. Press MENU to bring up the Main menu.

2. Point to Picture Quality and press MENU. The Picture Quality menu comes up.

3. Press MENU to select Basic Picture Controls.

4. Press the right or left arrow to adjust the indicator line. Notice that the picture changes as you adjust the contrast.

Now that you know how the contrast slider works, you know how all sliders work.

[--tn-tomt 1

names of the control panel types.

Once you've learned how each type

works, you'll be able to use any part

of the menu system.

i i

CHOICE LISTS

Choice lists are used to choose a particular setting from a list of settings. The current setting in a choice list is always the highlighted item.

For example, tO indicate whether you're currently using a home

antenna or a cable TV signals:

1. Press MENU to bring up the Main menu.

2. Point to Channel and press MENU. The Channel menu comes up.

Point to Signal Type and press MENU. The Signal Type choice list comes up with the current setting highlighted. For

example:

4. Point to the correct setting for your Connection and press MENU. As soon as you select a choice, the TV saves your

change, and you are returned to the previous menu.

5. Point to Exit and press MENU to return to the Main menu.

6. Point to Exit and press MENU to return to TV viewing.

NUMERIC ENTRY

A numeric entry control panel is used to enter numbers or

Iette rs. For example, to set the current time:

"1. Press MENU to bring up the Main menu.

2. Point to Time and press MENU.

3. Point to Set Time and press MENU. The Set Time numeric entry control panel comes up. Notice the pointer underneath the first column.

Press the up arrow to enter a number in that column. Press the right arrow to move to the next column, then press

the up or down arrow to enter a number. Repeat Step 5 until you have entered the hour and minute

for the current time. Notice that when you reach the last column, pressing the up or down arrow changes whether the time reads AM or PM.

When you have entered the correct time, press MENU. You are returned to the Time menu.

8. Point to Exit and press MENU to return to the Main menu.

9. Point to Exit and press MENU to return to TV viewing.

If the control panel is not set at the current time, use the left arrow to go back over the columns and the up arrow to make changes.

You can alsc_enter numbers directly by using the number buttons.

TV GUIDE PLUS+ MENUS

The TV GUIDE Plus+ system is an interactive on-screen program guide that lists TV schedules for your area, and allows your TV direct control of a cable box and VCR. Use of the system's menus differs slightly from the point and select method described earlier.

1. Press GUIDE to bring up the TV GUIDE Plus+ menu.

WABC 5 Cesby

WGN 9 Baseball_Cubs vs Braves

WNBC 4 Simple Pleasures

WCBS ii Jerry Springer WTRW 17 Weaving Today WJAX 34 The ubiquitious G-Men

WIMT 42 You Bet Your Life

-- Menus or Options

gram Information

Channel Listing

There are three sections to a TV GUIDE Plus+ menu:

A row of menus or options across the top of the screen

• Program information

• Channel listing Unlike your TV's other menus, TV GUIDE Plus+ menus use two

methods of pointing and selecting on the same screen---one for menus or options, and one for program information.

To select menus or options:

• Press the right or left arrow to highlight your choice.

• Press MENU to select the highlighted item. MENU is used only when selecting menus or options.

To make selections in the program listing:

• Press the up or down arrow to select a channel.

• Press GUIDE or CLEAR to exit the TV GUIDE Plus+ system. The

TV will change to the channel you selected if you used the

GUIDE button. Pressing CLEAR returns to the original

channel.

See Interactive Setup and Advanced Features for more

information on using the TV GUIDE Plus+ system.

TV GUIDE Plus+ screens illustrated in this book are representations of what

you are likely to see. Not all channels, programs, and TV GUIOE Plus+ infor-

mation depicted will be available in your area.

Currently, program information can include title, brief description, time program :starts, length, and the availabili_:y of closed captioning, stereo and additional program information.

New features and options can be downloaded to the TV GUIDE Plus+

system, so these too are subject to change.

THERE'S AN ON-SCREEN SETUP ROUTINE

Your TV has software that tells it what to do, just

like a computer. The interactive setup routine takes

you through the steps needed to configure the TV:

• Select a menulanguage

• Search for available channels

• Set up the TV GUIDE Plus+ system

• Set the time

• Set-theVCR1 channel

• Set the DVD/VCR2 channel 0, Setthe SAT/CABLE channel

• Make the channel list and labels

I NTE RAC'FIVE SETU P

Complete the first two steps, Select Language and Auto Channel Search, to receive antenna or cableTV signals.After

that, you can skil_ other steps and return

to them at your convenience.

ENTERING SETUP

Setup is accessed through the Main menu:

1 Press MENU to bring up the Main menu.

2. Point to Setup and press MENU. The first Setup screen comes

up, asking you to confirm that you want to begin.

3. Press MENU to begin the Setup routine.

SELECT A LANGUAGE

The first part of the setup routine asks you to select your

preferred language for the menuing system.

1. Point to your preferred language for the menuing sYstem.

2. Press MENU to select that language for the menuing system.

AUTO CHANNEL SEARCH

The next part of the setup routine asks you if you want the TV to search automatically for all channels available through your antenna or cable TV system. This is sometimes called "autoprogramming."

Press MENU to tell the TV to begin searching for channels.

The display gives you a progress report and tells you when it

has finished.

2. Press MENU to continue.

TV GUIDE PLUS+ SYSTEM

The next step lets you set up the TM GUIDE Plus+ system to

display your local program listings, and control your cable box and VCR.

If you skip Auto Channel Search now, you can accessit later through the Channel menu You can also put channels in memory manually using

List & Labels. See Quick Reference for

more details.

1. Press MENU to bring up the TV GUIDE Plus+ initial menu.

Demo Select Channels Exit

2. Press MENU to begin setup.

To complete TV Guide PILls+ setup, you must have already connected the TV Guide Plus+ controllers to your

cable box arid VCR. Refer' to First Things Fir.st for more details:

The first two screens ask for information about where you live.

Where do you live?

Canada

3. Select your country.

Enter your zipcode

4. Enter your ZIP code (Postal Code in Canada) using the numeric keypad. If you make a mistake, press MENU to back up a number.

The next series of screens asks you about your cable TV setup. If you have a cable box, you will want to set the TV GUIDE Plus+ system to control it. Otherwise, it may not be able to locate and download program information.

Do you have cable?

5. Select YES if you have cable, or NO if you do not.

Since the program information ]

provided by TV Guide Plus+ is based on your locale, you will need to run setup again if you move.

m i

Do you have a cable box?

6. Select YES if you have a cable box, or NO if you do not.

CANCEL EXIT

Turn on cable box

Enter cable box brand # from

brand table in your manual

7. Enter the code for your cable box's brand from the table on the following pages.

When the TV GUIDE Plus+ system correctly identifies the brand and model of your cable box, the cable box changes to channel 9.

NO EXIT

Testing code i 2 - 0 1

Has your cable box switched to channel 9?

8. Select YES if the cable box changed to channel 9, or NO if it did not. If you select NO, the system will try another code.

Once the correct model of cable box has been identified, you will need to set the cable box's output channel.

Select Cable Box OutputChannel

9. Enter the channel you normally use to view channels through your cable box--usually 3 or 4. Consult your cable box's

instruction book or your cable company if you are not sure. Choose 0 to'use VIDEO INPUT 1.

The last series of screens asks about your VCR setup.

DO you have a VCR?

10. Select YES if you have a VCR, or NO if you do not.

Answering NO automatically skips forward to the end of TV

GUIDE Plus+ setup.

CANCEL EXIT

Tune VCR to 2 and turn it off Enter VCR brand # from brand table in your manual

11. Tune your VCR to channel 2 and turn it off.

12. Enter the code for your VCR's brand from the table on the following pages.

Channel:_ 0-7 can be used for the

cable box's output channel. "0" is

used for VIDEO INPUT 1 (INPUT 2

cannot be used); 1-7 are regular TV

channels.

See Advanced Features for more

details c,n using the TV GUIDE Plus+ system lo control a cable box and

VCR.

:ii _ • i ::::•_i::_/!"/i/ii _:!'!:/_:_"!'i':

, ...... ..•%

When the TV GUIDE Plus+ system correctly identifies the brand and model of your VCR, the VCR'stuner changes to channel 9.

NO EXIT

Testing code 1 2 - 0 1

Has your VCR

switched to channel 9?

13. Select YES if the VCR automatically changed to channel 9, or NO if it did not. If you select NO, the system will try another code.

This screen comes up when you've successfully finished TV

GUIDE Plus+ setup.

• Your TVGuide Plus_ will be ready for use within 24 hours.

Always leave your cable box

ON and your VCR OFF.

14. Select EXlTto continue with the remainder of the interactive setup.

The TV GUIDE Plus+ system will be unavailable until it completes

its first download of program information.

When the power isturned off, the TV locates a "host channel" that carries TV GUIDE Plus+ data containing program schedule and channel mapping information. A channel map isthe list of

stations and their respective channels. See Advanced Features for more details. "

Downloads may be scheduled several times a day. The TVmust

be turned off for TV GUIDE Plus+ data to download.

If more than one cable company services your area, the TV GUIDE

Plus+ system may download a channel map for each company.

After the 'I_ completes its first download, you will be prompted to manually select the channel map.

See Advanced Features for complete instructions.

TV GUIDE Plus+ VCR Codes

Admiral ......................... ........ 19

Akai ..................................... 15

Audio Dynamics .................. 11

Belcor ................................... 16

Bell&Howell ........................ 04

Broksonic ............................. 26

Candle ................................. 27

Canon .................................. 03

Capehart .............................. 16

Craig .................................... 17

Curtis ................................... 23

Daewoo ........................ ....... 16

DBX ...................................... 11

Electrohome ........................ 08

Electron ............................... 01

Emerson ............................... 05

Fisher ................................... 04

Funai .................................... 14

GE ........................................ 01

Go Video ............................. 02

Goldstar ............................... 22

Grundig ............................... 03

Harman Kardon .................. 08

Hitachi ................................. 21

Images ................................. 02

JC Penney ............................ 25

Jenson .................................. 31

JVC ....................................... 12

Kenwood ............................. 12

KLH ...................................... 17

Magnavox ........................... 07

Magnin ................................ 23

Marantz ............................... 11

Marta ............................... '.... 22

Memorex ........ :.................... 29

MGA .................................... 08

Minolta ................................ 21

Mitsubishi ............................ 08

Montgomery Ward ............. 14

Movie Walker ...................... 14

MTC ..................................... 14

Multitech ............................. 14

NEC ...................................... 11

Nikko .............................. 16,22

Olympus .............................. 03

Optimus ............................... 27

Optonica .................... :......... 19

Orion ................................... 24

Panasonic ............................ 03

Pentax .................................. 21

Philco ................................... 28

Philips .................................. 28

Pilot ..................................... 22

Pioneer ................................ 21

ProScan ................................ 01

Quasar ................................. 03

Radio Shack/Realistic .......... 30

Randix .................................. 22

RCA ...................................... 01

Samsung .............................. 23

Sansui .................................. 20

Sanyo ................................... 04

Scott ..................................... 05

Sears .................................... 06

Sharp .................................. ,19

Shintom ............................... 17

Shogun ................................ 23

Signature ............................. 19

Sony ..................................... 13

Sylvania ............................... 28

Symphonic ........................... 14

Tatung ................................. 31

Teac ...................................... 31

Teknika ................................ 18

Telefunken .......................... 05

TMK ..................................... 05

Toshiba ................................ 10

Totevision ............................ 23

Vector Research .................. 11

Zenith .................................. 09

I he TV GUIDE Plus+ system may not operate all models of |

the brands listed in the tables on this page.

TV GUIDI" Plus+ Cable Box Codes

Archer .................................. 14

Cable Cinema ...................... 31

Cabletenna .......................... 31

Cableview ............................ 31

Century ................................ 27

Citizer ................................. 29

Curtis ................................... 04

Diamond ....... _...................... 31

Eagle +_.................................. 09

Eastern ................................. 13

GC Flectronics ...................... 26

Gemini .................................. 15

General Electric .................... 19

Gener_l Instrument ............ 01

Gerrafd ................................ 27

Hamlin ............................ 06,13

Hitacl _i ................................. 16

Jasco .................................... 15

Jerrold ................................. 01

Macom ................................. 16

Magnavox ........................... 11

Ma_:sushita ........................... 07

Movietime ........................... 17

NEC ...................................... 22

Nova\,ision ............................ 04

NSC ....................................... 22

Oak ....................................... 05

Oak Sigma ............................ 05

Panasonic ............................ 07

Philips .................................. 10

Pioneer ................................ 02

Pulser. .................................. 24

Ouest ................................... 02

RCA ...................................... 07

Reali_.:tic ............................... 27

Recolo n .............................. : 27

Regal .................................... 06

Regency ............................... 13

Rembrant ....... ;.................... 26

L.L. Marx .............................. 23

Sams_ng ............................... 23

Scientific Atlanta ................. 04

Sheri tech .............................. 12

Signal .................................... 11

Sprucer ................................ 07

Standard Components ........ 17

Stare ate ............................... 24

Sylvania ............................... '08

Tekn ika ................................ 20

Telecaption .......................... 21

Teie_iew .............................. 22

Texs(:an ................................ 08

Tocom .................................. 18

Tosh ba ................................ 30

Unika ................................... 26

Universal .............................. 25

Vide _way ............................ 03

Vidtek .................................. 28

Viewsta r ............................... 09

ZeniLh ................................... 03

',_ET THE TIME

The next step lets you set the time of day.

1. Press MENU to bring up the Set Time control panel.

Use the left and right arrows to point to the hour and minutes spaces. Use the up and down arrows to scroll through the numbers and change from AM to PM.

3. Press MENU to continue.

SETTHE VCR1 CHANNEL

The next step lets you set the VCR1 channel. Whenyou set the

VCR1 channel, you're telling the TV what channel to tune to

when you press the VCR1 button on the remote.

For example, if you have a VCR connected to the Video 1 input

jacks on the back of the TV, you want the TV to tune to the

Video 1 input channel when you press the VCR1 button. If you don't have a VCR1 component connected to the TV, skip this step or select Not Connected from the VCR1 Channel choice list. (For more, see Auto Tuning in the Quick Reference section.)

1. Press MENU to bring up theVCR1 choice list.

Point to the choice that matches the way you have your VCR connected to the TV.

If you used the Connections Foldout to hook up your TV, use

the table shown at the right to select the VCR1 channel.

3. Press MENU to continue.

SET THE DVD/VCR2 CHANNEL

The next step lets you set the DVDNCR2 channel. When you set the DVD/VCR2 channel, you're telling the TV what channel to tune to when you press the DVD,VCR2 button on the remote.

For example, if you have a DVD player connected to the Video 2 input jacks on the back of the TV, you want the TV to tune to

the Video 2 input channel when you press DVD°VCR2. If you

don't have a DVD°VCR2 component connected to the TV, skip

this step or select Not Connected from the DVD/VCR2 Channel

choice list. (For more, see Auto Tuning in the Quick Reference

section.)

1. Press MENU to bring up the DVD/VCR2 choice list.

Point to the choice that matches the way you have your DVD player or second VCR connected to the TV.

If you used the Connections Foldout to hook up your TV, use

the table at right to select the DVD/VCR2 channel.

3. Press MENU to continue.

If you used / Select Connection A Not Connected Connection B Not Connected

Connection C Video 2 Input

Connection D Channel 3* Connection E Video 1 Input

Connection F Not Connected Connection G Not Connected Connection H Video 2 Input

Connection I Channel 3*

* Or Channel 4, depending on how

your VCR's 314 switch is set.

+ 61 hidden pages

RCA F32674, F27679, F36674ET User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual