RCA EZ2110 User Manual
EZ2110 Series RCA Small Wonder Camcorder
www.mysmallwonder.com
Congratulations on purchasing your new RCA High De nition Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
The User Manual PDF le can also be found in the camcorder memory under the User Manuals folder.
Please charge the battery for at least four hours before rst use.
QuickStartGuide
1. Content of the box
• Small Wonder Camcorder
• USB cable
• AV cable
• Tripod mount bracket
• 2 GB micro SD card (Installed in device)
• Software DVD
• User Manual
• Quick Start Guide
• Owner Registration card
• Warranty lea et
2. Charging your camcorder
3. General controls
Lens
Video
quality
selector
Recording indicator
Microphone
microSD card slot
Camcorder strap hole
On/o switch*
Delete recordings
Take photo
AV output
Playback/pause
Setup menu
Record
Audio speaker
LCD screen
USB and HDMI
video output
+/– – Adjust volume
during playback/
zoom during record
and preview
/ – Skip to
previous or next
recording; fast rewind
or forward
* To reset the camcorder (in case it is not functioning properly):
Slide and hold the On/o switch for more than 10 seconds.
2
Actual recording time and capacity will vary depending on type of video content being recorded, system requirements,
and other factors.
6. Selecting recording quality
Battery indicator
Memory card indicator
Selected recording quality
Settings
HD
HQ
WebQ
Resolutions (pixel) &
Frame Rates (FPS)
1280 x 720 @ 30fps
720 x 480 @ 30fps
320 x 240 @ 30fps
Approx. recording durations
on a 2 GB memory card
2
Up to 1 hours
Up to 1.7 hours
Up to 5 hours
Preview mode
5. Turning on the camcorder
Slide and
hold until the
camcorder turns
on or o
4. Inserting (or removing) memory card
A micro SD memory card (supplied) is recommended for recording.
As the memory card is small in size, it is recommended to use a small coin to help insert or remove it.
To insert card: Push the card in until a click is heard
To remove card: Push card in until a click is heard, then slowly release
the card. As card is under minimal tension when locked in memory
slot, please use care when removing.
Lift up the cover
NOTE:
The unit is properly charging when you
see the animated charging symbol on the
Camcorder display.
If you do not see this charging symbol, follow these
steps:
1. Make sure that you have the camcorder
connected to the computer USB port through
USB cable, and the computer is turned on.
2. Momentarily slide and hold the Camcorder power
switch to the ON position to initiate charging.
The camcorder has two operation modes (Preview and
Playback). It is always in Preview mode after switched on.
Refer to the diagram below for switching between modes.
Switch on
Auto timeout
Press PHOTO
Press PLAY/PAUSE
Playback mode
Press PHOTO /
Press Record
Preview mode
1
Take a photo
1
In Preview mode, press Record to record a video.
v2.0 (1.0.2.0) (EN)
English
USB port of your
computer
USB cable
More Information About The Software DVD
Read the user manual for more information on the followings:
• Using the MENU button to setup the camcorder (including date and time)
• Viewing videos on TV
• Recording videos to VHS tape or DVD
• Connecting the camcorder to your PC
• Tips and troubleshooting
• Safety and warranty information
10. Learning more about the camcorder
7. Video recording and photo taking
1
2
3
4
5
Start, stop, resume recording in Preview mode; enter
Preview mode from other modes
Pause recording
Zoom in during recording
Zoom out during recording
Take photos
1
2
3
4
5
Video recording indicator
8. Playing back or deleting recordings
1
2
3
5
4
1
2
3
4
5
6
7
Enter Playback mode to play the most recent recording;
start or pause playback
Adjust volume during playback
Cue to previous recording
Cue to next recording
Enter Preview mode from Playback mode
Press to select delete one or all recordings.
Enter Preview mode from playback mode; take photos
6
7
To ensure that videos can be managed and played on your PC:
• Make sure to install the included Memory Manager application.
Connect the camcorder to your PC with the provided USB cable.
To install Memory Manager 3
Windows: Open My Computer and double-click the drive labeled SMALLWONDER. Double-
click MemoryMgr3_Windows_Installer.exe to start the installation.
Mac: Open the mounted volume labeled SMALLWONDER on the desktop. To download
the Memory Manager 3 installer, visit www.mysmallwonder.com. Locate the downloaded
RCAMacInstallers volume on the desktop and Double-click on it. Double-click the
MemoryMgr3 Mac Installer le in the RCAMacInstallers volume to start the installation.
After the Memory Manager 3 installation has completed, double-click the RCA Detective
Installer le in the RCAMacInstallers volume to install the RCA Detective application.
9. Installing RCA Memory Manager application
© 2010 Audiovox Accessories
Corporation
111 Congressional Blvd., Suite 350
Carmel, IN 46032
Trademark Registered
Printed in China
QuickTime and the QuickTime logo are trademarks or registered trademarks of
Apple Computer, Inc., used under license therefrom.
Visit http://store.audiovox.com to find
the best accessories for your products.
The “bonus” software DVD includes multiple titles speci cally for the purpose of advanced
photo editing and printing. The installation and use of these software titles is optional. It is
not necessary to use these applications to view, edit, or share your Small Wonder camcorder’s
videos/photos. The built-in Memory Manager™ software (a separate RCA software application
which installs from the camcorder’s memory card) is provided for the purpose of viewing,
editing, and sharing your Small Wonder camcorder’s videos/photos.
Before Using: Please check your system speci cations to ensure that that your computer
meets the following minimum system requirements.
• Windows XP/Vista (not compatible with MAC)
• Internet Explorer 6.0, Firefox 1.5 or later
• 800 MB of free hard disk space
• DVD drive
• 512MB RAM
Loading...