RCA 2-9120, 2-9130 User Manual

FOLD

FOLD FOLD

LIMITED WARRANTY

What your warranty covers:

• Any defect in materials or workmanship.

For how long after your purchase:

• One year. (The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.)

What we will do:

• Provide you with a new or, at our option, a refurbished unit.

• The exchange unit is under warranty for the remainder of the original

product’s warranty period.

How to make a warranty claim:

• Properly pack your unit. Include any cables, etc., which were originally provided with the product. We recommend using the original carton and packing materials.

• Include in the package evidence of purchase date such as the bill of sale. Also print your name and address and a description of the defect. Send standard UPS or its equivalent to:

Thomson Consumer Electronics, Inc. Product Exchange Center 32 Spur Drive El Paso, Texas 79906

• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.

• Insure your shipment in case of loss or damage. Thomson accepts no liability in case of damage or loss.

• A new or refurbished unit will be shipped to you prepaid freight.

What your warranty

• Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and user controls. For additional information, ask your dealer.)

• Installation and set-up service adjustments.

• Batteries.

• Damage from misuse or neglect.

• Products which have been modified or incorporated into other products.

• Products purchased or serviced outside the USA.

• Acts of God, such as but not limited to lightning damage.

Product Registration:

• Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage.

How state law relates to this warranty:

• This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

If you purchased your product outside the USA:

• This warranty does not apply. Contact your dealer for warranty information.

does not

cover:

FCC REGISTRATION INFORMATION

Your GE telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68, FCC Rules and Regulations. 1 Notification to the Local Telephone Company

On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company.

The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as determined by the REN, you should contact your local telephone company. Notes

• This equipment may not be used on coin service provided by the telephone company.

• Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you are on a party line. Check with your local telephone company.

• Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.

2 Rights of the Telephone Company

Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.

The telephone company may make changes in its communications facilities, equipment, operations of procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service.

INTERFERENCE INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).

• Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.

• Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is connected.

• Consult the dealer or an experienced radio/TV technician for help.

If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when ordering copies.

HEARING AID COMPATIBILITY

This telephone system meets FCC standards for Hearing Aid Compatibility.

FCC NUMBER IS LOCATED ON THE CABINET BOTTOM REN NUMBER IS LOCATED ON THE CABINET BOTTOM

2-9120

2-9121

2-9122

2-9123

2-9124

2-9126

2-9127

2-9120 /2-9130

Color Series

Telephone User's Guide

2-9130

2-9131

2-9133

2-9143

2-9136

2-9137

2-9120/21/22/23/24/26/27

2-9130/31/33/34/36/37

Printed in Malaysia

2-9120/30 Color Series (Folded size 80 x 175 mm)

20909690

Sheet 1 0f 2 (Double-side printing with 3 Folds)

20909690

98-08

FOLD

We bring good things to life.

FOLD FOLD

FOLD

You need an RJ11 type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone company to find out how to get one installed.

INSTALLATION

DESKTOP OR TABLETOP INSTALLATION

3 4

OFF

TONE

RINGER

PULSE

MNO

WXY

OPER

0000

DEF

231

564

JKL

897

TUV

TONE

ABC

GHI

PRS

0000

1. Remove telephone line cord from the pocket on the bottom of the phone.

2. Run telephone line cord through the guides on the bottom of the phone.

3. Connect the telephone line cord to a modular telephone jack.

4. Slide the RINGER switch (on the side of the handset) to ON.

5. Set PULSE/TONE switch (on the side of the handset) to TONE for touch-tone service, or set it to PULSE for rotary service.If you don’t know which type of service you have, check with the phone company.

WALL MOUNT INSTALLATIONMODULAR JACK REQUIREMENTS

Mounting holes

Coiled handset cord

DEF

ABC

231

MNO JKL GHI

RINGER

564

OFF

WXY TUV PRS

897

TONE

OPER TONE

PULSE

0000

1a. If the modular phone jack is

in the base plate on the wall where you're going to mount your phone, just plug the telephone line cord into the jack; mount the phone on the posts; and set the RINGER switch and PULSE/ TONE switch (described in detail below).

1b. If the modular phone jack is

near the floor and you want to mount the phone on the wall, remove the telephone line cord from the pocket that is on the bottom of the phone. Wrap the phone cord around the circular guide on the bottom of the phone.

2. Plug telephone line cord into the modular jack.

3. Slip mounting holes on the bottom of the telephone over the wall plate posts and slide

Telephone line cord

the base down until the phone is firmly in place. (Wall plate is not included.)

4. Slide the RINGER switch (on the side of handset) to ON.

3 4

USING THE TELEPHONE FEATURES AUTOMATIC REDIAL

To automatically redial the last number you called:

1. Pick up the handset to get a dial tone.

2. Press REDIAL.

FLASH

Press the FLASH button instead of the hook switch to activate custom calling services such as call waiting or call transfer. Custom calling services are provided by the phone company.

TEMPORARY TONE

If you have pulse service, you can temporarily change from pulse to tone service in order to access services that require tone dialing (such as getting information from a local bank). After dialing the telephone number, press and release the tone button, marked with an asterisk (*). When you hang up, your phone telephone returns to pulse service.

flash

ABC3DEF

JKL6MNO

GHI

PRS

TUV9WXY

TONE

OPER

0000

redial

REDIAL button

FLASH button

SERVICE

FCC requires this product to be serviced only by the manufacturer or its authorized service agents. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Consumer Electronics could void the user’s authority to operate this product. For instructions on how to obtain service, call 1-800-448-0329.

Attach your sales receipt to the booklet for future reference or jot down the date this product was purchased or received as a gift. This information will be valuable if service should be required during the warranty period.

Purchase date ________________________________ Name of store _______________________________

TROUBLESHOOTING TIPS

Problem Solution

No dial tone. • Check hook switch to make sure it pops up. Won't dial out • Make sure PULSE/TONE is set to correct position.

Phone doesn’t ring • Make sure RINGER switch is set to ON.

• You might have too many phones on one line.

Feedback when • This is normal. Power fluctuates with phone outpulsing. dialing in PULSE mode.

Can’t be heard by • Make sure phone cord is securely plugged in. other party • Make sure other phones aren't off the hook at the same time you're using the phone. It is

normal for the volume to drop when additional phones are used at the same time.

2-9120 (Folded size 80 x 175 mm)

20724660

Sheet 2 0f 2 (Double-side printing with 3 Folds)

FOLD

FOLD FOLD