CRT TELEVISION
START
GUIDE
www.rca.com/television
Jacks
R-AUDIO-LS-VIDEO
R-AUDIO-L
VIDEO
Choose Your Connections
Make your connection decision easier by taking a few minutes to review the
jacks on your new TV. Compare the jacks on the device you want to connect and
see if the same jacks are available on your TV. Then refer to the chart below to
determine the best connection to make.
For more information about connecting your TV to other devices, refer to the
User’s Guide that can be found in the support section on www.rca.com/television.
Make sure you read the safety information provided separately before you
connect and operate your TV.
Quality Connects to... Cables needed (not included)
Devices with S-Video outputs,
such as DVD Players, VCRs,
Satellite Receivers, Cable
Boxes, Camcorders, and
Digital Cameras
Devices with Video (composite)
outputs, such as DVD Players,
VCRs, Satellite Receivers,
Cable Boxes, Camcorders, and
Digital Cameras
S-Video
Audio
Video
Audio
Connect a Signal Source
OUT TO TV
Cable Box, Satellite
Receiver, or Wall Outlet
ANT IN
TV
(Back Panel)
fi g.1 fi g.2
OR
We help improve our environment by printing only this one page of instructions. The complete User’s Guide is available at the
support section on www.rca.com/television.
Español- Ayudamos a mejorar nuestro ambiente imprimiendo sólo esta página de instrucciones. La Guía de Inicio Rápido en
Español y la Guía del Usuario completa se encuentran disponibles en la sección de soporte en www.rca.com/television.
Français- Nous aidons à améliorer l’environnement en imprimant cette seule page d’instructions. Le Guide de démarrage rapide
RCA and associated marks are trademarks of THOMSON S.A. used under license to TTE Corporation.
et le Guide de l’utilisateur sont disponibles en Français dans la section du soutien, sur le site Web www.rca.com/television.
or
ANT IN
TV
(Back Panel)
Connect your TV to cable; a cable box or
satellite receiver; or an antenna in order to
receive TV channels. Connect the cables as
shown in fi g.1 or fi g.2.
If you’re connecting a cable box or satellite
receiver and it has a Video output jack, connect
the cable box or satellite receiver to your TV
using the Video jack for a better connection.
Continue to Step 2, Set Up Your TV, on the back
page.
Setup
TV/CATV CATV
Channel 1
Add/Erase Erase
Manual Down
Auto Search
Favorite List
Set Up Your TV
Make sure you have already: connected your TV to devices and a signal source,
plugged in the TV, and put batteries in the remote.
Now: Turn on the TV and start the setup.
• Set the Menu Language. The default menu language is set to English. To
choose another language, press the MENU button, highlight Preferences, then
press OK. Press the VOL+ button to choose a language. Press the MENU button to
return to the previous menu.
• Set the Signal. Press CH- until Setup is highlighted, then press OK. Press VOL+
to choose CATV if your TV is connected to cable, or TV if your TV is connected to
an antenna. Press CH- until Auto Search is highlighted.
• Search Channels. Press VOL+ to start the channel search. Your TV tunes to a
channel once the search is complete. Go to the next step to set the clock, or go
Step 3 Operate Your TV for more information.
• Set the Clock. From the Main Menu, highlight Time and press OK. Press CHuntil Clock is highlighted. Press VOL+ to change the minutes, then press OK when
complete (the highlight moves to the hour position). Press VOL+ to change the
hour. Repeatedly press MENU to exit the menu system.
INPUT
MENU
ON•OFF
SLEEP
CC
CH +
MUTE
CH -
INFO/DEL
VOL
INPUT PRESETS
MENU OK
VOL
VOL- VOL +
GO BACK FAV
NOTEPAD CAPS INSERT CALENDAR
FAV
Operate Your TV
Viewing Devices Connected to Your TV
To view devices connected to your TV, use the INPUT button until the input name
appears that matches the input of the device you connected. Your choices are:
FRNT, VIDEO, S-VIDEO.
Using the Menu System
To access the menu system, press the MENU button. Use the CH+/- buttons to
scroll up or down, VOL+/- buttons to toggle choices in submenus, and OK to
change selections. Here are some features you might want to use:
• Adding and Deleting Channels. To add a channel that wasn’t found during the
channel search or delete one you don’t want in the channel list: Press MENU, press
the CH- button to highlight Setup, and press OK. Press CH- to highlight Channel.
Press the VOL+ button to select the channel you want to add or delete. Highlight
Add/Erase, then press VOL+ to add or erase the channel.
• Saving a Favorite Channel. To store a favorite channel: Press MENU, press
the CH- button to highlight Setup, and press OK. Press CH- to highlight Favorite
List and press OK. Press the VOL+ button to select TV (TV connected to antenna)
or CATV (TV connected to cable). Press CH- to highlight CH1, then press VOL+
to choose the fi rst favorite channel. Continue to use the CH- and VOL+ buttons
to add favorite channels. To quickly access a favorite channel while watching TV,
press the
FAV button.
• Locking the Front Panel. Locking the front panel is convenient to keep
children from using the front panel buttons. Press MENU, press the CH- button to
highlight Preferences, and press OK. Press CH- to highlight FPA Lock. Press the
VOL+ button to select On.
For more information on features, refer to the User’s Guide that can be found in
the support section on www.rca.com/television.
Thank you for your purchase. Before making a trip back to the retailer, please visit www.rca.com/television for more information or contact us at
1-800-336-1900 so that we may assist you in operating the unit, replacing missing parts, and ensuring your satisfaction with the product.
TOCOM 16715400