13TVR60/19TVR60
TV/VCRUser'sGuide
We bring good things to life.
Important Information
lie
WARNING
To reduce the risk of fire oi shock
hazard, do not expose this TV/VCR
to.rain or moisture.
I
Cautions
II
TO REDUCETHE RISKOF ELECTRICSHOCK,DO
NOT REMOVECOVER (ORBACK).NO USER
SERVICEABLEPARTSINSIDE.REFERSERVICING
TO QUALIFIED SERVICEPERSONNEL
Thissymbol_UcaWs
"dangerousvoltage"
A
Do not defeat the safety tesk-meo_me plug. lne wlue vmu_ .= a,v -.=. ....
only one way. Ifyou need _n co/d, make sure it matches the plug 6f the
TV/VCK
FCC regulations state that unaumonz_kcnang _ or moomcauo_ _o this equipment
may void the user's authority to operate't_
insidethe product,that
presents a risk of electr_
CAUTION: to prevent electric shock, match wide blade of plug
to wide slot, fully insert.
importantinstruc_ons
accompanyingthe
producL
Note to Cable TV Installer
This reminder is provided to call your attention-to .Ar_oe _-4u orme National
Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides
guidelines for proper grounding and, in particular, specifies thatthe cable ground
shaUbe connected to tb_ grounding system of the building as dose to thepoint of
cable entry as practical.
Product Registration
Please fill out the product registration cardand return it immediately. Returning
this card allows us to contact you ifnecessary.
Keep your sales receipt to obtain warranty parts and service and for proof of
purchase. Attach ithere and record the serial and model numbers in case you
need them. The numbers are located on the back of theTV/VCR combination.
ModelNo. 13TVR60/19"rVR60
Serial No.
Purchase Date:
Degfler/Address/Phone:
i •
mUB]fl_l/_l]_# mm
Table of Contents
Important "information
w_
Cautions
Note to Cable TVInstaller
Product-Registration
Setting Up the TV/VCR
S_l_up
Che_ Accessories With TV/VCR __ 2
InsertBatteriesin Remote 3
ConnectAntennaorCable-TV
System 3
Turn On the TV/VCR 3
Put Channels into Memory.
(Auto Channel Search) 3
Add or Remove Channels from
TV/VCR's Memory 4
Set the Time and Date (Clock) __ 4
Select the Language. (Escoge
una Lengua.) 5
Select a Channel and Adjust
the Volume 5
Using the Remote Control
Buttons
Using the TV/VCR FeatUres
_-_ _hys 8
Adjust theV_deo 8 "
Closed Captioni_ 9
Commercial Skip 9
WakJe-UpTuner . 10
SleepTimer " 10
6-7
i
i
i
i
Index Search
Zero Search
Blank Search
Recording a Program
Recording Features
Zecord_ Speeds
Recording Pause
Child Lock
Types of Recordings
Basic Recording
• One TouchRecording
TimerRecording
Checking or Clearing Time_
Recordings
Stopping a Timer Recording
Copying and Edi_g Tapes
Location of Controls
FrontPanel 23
BackPanel 24
Hooking Up the TV/VCR
Choosing a Hookup 24
Connect Cable SystemWithCableBox to
Unscramble All Channels 26
Connect Cable System With Cable Box to
Unscramble Only Premium
Channels 26
ConnectVCR orCamcordeT
forCopying Tapes 27
References
Trouble Checks 28-29
Cleaningthe"IV/VCR 30
Specifications 30
15
16
16
17
17
17
18
19
2O
21
22
22
Playing a Tape
Using the Playback Features
Pause 12
Frame Advance 12
Picture Seai_ 12
Automatic Tracking 13
Manual Tracking 13
Tnne Counter. 13
Auto Play Feature 14
Auto Repeat Feature 14
Commercial Scan 14
Index 32-33
1
m.-y_B mlIMW |mmRml_ ssHI_ L'_B
Startup
1. Check accessories with TVNCR combination.
Contactyour dealezif any itemsaremissing.
0c30
Remote
(Stock No. 231536)
Antenna Adapter
(300-75 Ohm)
(Stock No. 193_3)
VHF/UHF DipoleAntenna
_'tock No. _0_8)
_÷ -()_÷ -()
2 "AA" Battsdes
p
L_i_|Im#ff_AWAWlINI
Startup
2. Insert batteries in remote.
m
Connect antenna or cable-TV system.
Connect the supplied dipole antenna, a different home antenna, or a
• cable-TV system. Details onpages24-26.
m
TUrn on the I_fNCR.
PressPOWERon the "IV/VCR orremote. Theindicatorin
POWERbuttononthefront oftheTV/VCR will Light.
5, Put Channels into Memory (Auto Channel Search)
A. PressMENUonthe remote to display the TV/VCR MAINMENU.
B. Pr_ 5 to displaytheSETUPmenu.
C. Press1 tod_play the AUTOCHANNELSEARCHmenu.
D. Anow theTV/VCR to search for all channels. Pressing any
. buttonsduringtheAutoChannelSearchwillstopthesearchand
only some channels will be in the'I"4/VCR's memory. When the
search is finished the TV/VCR wiU automatically tune to the first
channel in its list.
TV/VCR RA:N NENU
1 Timer Recordings
2 Pfcture RuaL_ty
3 Ttme
4 CLosed Cspt4on4ng
Setup
SETUP
1 Auto Channel Search
2 Add/Remove channels
AUTO CHANNEL SEARCH
Now scanning channel 1
Press any key to cancel
continuedonnextpage 3
i_,ii/ll_ Imllllllllli_#_
•Startup
6. Add or remove channels from the TV/VCR's memory.
You maywant to addor move chazmelsif someof them arenot
active, have weak signals, oryou do not want them in your channel
memory. A channel that has been removed can still be selected by
pressing number buttons.
A. PressMENUon theremoteto display the TV/VCR MAIN MENU.
B. Press5 todisplay the SETUPmenu.
C. Press2 to displaythe ADD/REMOVECHANNELSscreerL
D. Follow the directions on the screen to add ox:remove a channel.
E. Add or remove more channels by entering the channel number or
pressing CHANNEL up or down.
7. Set the Time and Date (Clock).
PressMENUonthe _ot_ to displaythe TV/VCR MAIN MENU.
B. Press3 to displaythe TIMEmenu.
C. PressI todisplaythe SET33MEAND DATEscreen. "
D. Use the number buttons on the remote to enter the time including
AM or PM, month, day, and year.. Th.eday of the week will
automatically appear after you enter the year.
* Press 0 before single-digit numbers. Press I for AM or 2 for PM.
Example: press 0, then 5,'then 0, then 7, then 2 for a time of
5:07 PM.
* Press CLEARon the remote at any time tochange incorrect
entries.
E. PressMENU on the remote to start the dock.
To aise_ythe "rimeand date,pressDISPLAYonthe remote.
F. PressMENUor 0 to exitand return to TV viewing.
TV/VCR HAIR MENU
1 Timer Recordings
2 Picture GueLtty
3 Tiae
4 Ctosed Captioning
5 Setup
SETUP
1 Auto Channel Search
2 Add/Reuove channels
ADD/REROVE CHARNELS
Channel 10
is presently ADDED
P_ess CLEAN to remove
Press RENU to exit
TV/VCR RAIN RENU
1Ttaer Record4ngs
Z Ptcture quality
3 Time
TIRE
1 Set T4me and Date
SET TIRE AND DATE
Txae _%:__ m
(hh:muJ
Date --/--/--
SET TIRE AND DATE
T4ae 05:07 AN
Date 07/13/95 Thursday
Press CLEAR to correct
Press NENU to set
4
Uau,,#jMirmRmdlVAll_
Startup
7. Select the language. (Escoge una lengua.)
Thisfeatureletsyou selectEnglishorSpanish asthelanguageforthe
menuscreenson theTV/VCIL
A. PressMENU on remote to see the TVNCR MAIN MENU. -
B. Press6 to display the LANGUAGE/IDIOMA menu. The bullet (.)
indicates the language selected.
O. Press 1 to display the menu screens in EnglL_h.
Press2 to displaythemenu screensinSpanish.
&
Select a channel and adjust the volume.
A. PressCHANNEL up ordownor two number buttonson theremote
to select a channel.
Example: Press 0 then 2 forchannelI The channel number is
d played
Potcablechannelsover99,pressandholdqunRlq-- appears.
Thenpresstwomore numbers.Example:PressandholdI,
press0,thenpress2,forchannel10P-
B°
PressVOLUME
displayappeam
upordown toa_ijust.the volume. The volume
TV/VCR MAIN MENU
Programming
P_cture QuaLity
3 Time
4 CLosed Captioning
5 Setup
6 Lsnguage/Idtoma
LANGUAGE/IDIOMA
SeLect a Language.
Escoge una Lengua.
1-EngL4sh CingL_s)
2 Spanish Cespa_oL)
Press MENU to continue
Ch 02
VoLume ..| ............
b
Buttons
CHAN ^ and v (Channel up aad down)
_tecls ne_ ]_gherorlowercharme]in
chazmelmemoz7.
0
REW PLAY
<?C>
REC STOP
DISPLAY
© _
MUTE C/_N
CLEAR MENU
10 20
FF
D
PAUSE
f INPUT
).©
PREVCH
C?
RESET
W
CLEAR
Allows you to change menu entries or
clear a timer recording.
Resets time counter to 0:00:00 when it is
a_sp_yed.
DISPLAY
DL_tays TV/V(_,'s _t status.
Displays time counter when a tape is
_serted.
Removesdisplays.
Advances to next program during
program review.
"F.ADV _orwaLrd Advance)
Fast fi_r_ards _e tape through a
commercial when a tape is playing.
Advances the tape one video frame at a
time when the tape is in PAUSE mode. •
FF (Fast Foxward)
Fast forwards the tape when the
TV/VCR isstopped.
Searches the picture in forward motion
during playback;
0 0 0
F.ADV
6
INPUT
Switches between the signal fzom a
component connected to the AUDIO and
.VIDEO INPUT jacks and TV signal.
MENU
Displays the TVNCR MAIN MENU.
MUTE
Turns sound on or off.
i '" L
ButtonS +
Numbers (Oi_zough9)
n_'s.
Selectacat,le_ overO0_ pressing
and holdingI untilI-- appearson the
screen.Thenpresstheoth_two
numbe_.
PAUSE
Pausestheta_ dm_a_ playbad_
Pauses recording'toprevent recordingof
unwanted scenes.
PLAY
Plays a tape.
POWER
TurnsTV/VCR on or off.
PREV CH (l_vious channel)
Switchesbetweenthelasttwo channels.
Selectonechannelandthenselectthe
otherusix_thenumber buttons.Press
PREV CH toswitchbetweenthetwo
channels.
REW (Rewind)
Rewinds the tape when the TV/VCR is
stoppe_
Searchesthepictureinreversemotion
during playback. '
Sr_tRCH
OperatesCommercialSkip during TV
viewing.
Displays INDEX,ZERO,andBLANK
search screem when tape is inserted
in theTV/VCR.
Operates Commercial Scan by advancing
tape 60 seconds during playback.
SLEEP • "
Sets TV/VCR to automatically turn off in
30;60, 90, or 120 minutes.
• SPEED (TapeSpeed)
_c_ amco_g speed
(SP,SLP, or LP).
SlOP
Stops_mctions suchasrecord, play,
rewind, fastforward, and pause.
REC (Record)
StartsTV/VCR recording.
U.s_i for one-touch recording.
RESET
Resetsvideo functionstofactorysettin_
Usedtoresettime forwake-uptime_
(alarm).
TRACK • and _'
(Track_ up and down)
Letsyou manually reduce the streaks
thatmay appear in the picture during
p_ayba_.
VOL < and > (Volume up and down)
Raises and lowers sound.
7
Using the TV/VCR Features
On-Screen Displays
When you change channels, adjust volume, or use
a VCR feature, on-_ree_ displays appe.ar to let
you know the status of the TV/VCR.
To Call Up On-Screen Displays
1. Press DISPLAY _ display the _nction, time
counter, date, time, and tape speed.
you do not press DISPLAY _ these
displays will time out.
2. Press DISPLAY a&zLLm
* No tape in TV/VCIh Displays removed.
• Tape in TV/VCR: Time.counter remains on
screen. Will not time out. Press DISPLAY
again to remove the time counter.
Adjust the Video
Usethe PICTUREQUALITYmenu to adjustthe
• picture for your personal preference. The TV/VCR
will remember the settings you select.
To Adjust Video
1.
PressPICTUREonthef_ontof theI"4/VC_ to
ctisplaythe PICTUREQUALITYMENU
-OR-
,
PressMENUon the remotetodisplay the TV/VCR
MAIN MENU.Press2to dLsplaythe PICTURE
QUALITYmem_
TV/VCR RAIN RENU
1 Ttuer Recordings
2 Picture GuaLity
PICTURE QUALITY
CoLor -. ........ {.. .... +
Ttntcontr ":::::::::[:'"::
Brtte ......... L ......
Sharp ......... L ......
Use CH and VOL to adjust
Press RENU to extt
.
Press CH/_NNELup or down to choose the function you
want to adjust.
• Select Colortoadjust color intensity.
* Select Tintto adjust for natural fleshtones.
* Select Contr (contrast) tOadjust picture contrast.
• SelectBrite(bfi_tness) to adF_t pictm'e brightness.
. SelectSharptoadjust pictumsharpness.
o
Press VOLUMEup or down to a(i_Jst the function
selected.
To Return Video to the Factory Settings
PressRESETtoresetthe Videoto thelevelsset
at the factory.
.
Using the TV/VCR Features
Closed Captioning
_sed cap_oning,disphysthesoand ofaprogramaswordsontheTVscree_
It is use/u] for the deaf, hearing impaired, oranyone who wants to watch a
program without sound. If you have turned dosed captioning o_ and it does
not appear on the screen, it is not available on the channel you are watching.
Checkyour TVprogram listii_gsforCC (dosed caption)broadcasts.
To View Closed Captioning
1. PressMENU todisplay TV/VCR MAIN MENU.
2..Press 4 to display the CLOSED CAPTIONING menu.
3. PressI to changethe CC Display.
4. Press2toselectfheCC Mode.
• There are three choices:
OFF, ON, andON WHEN MUTED.
• _chtime y0upress 1 tbeOC Displaywitl _o_
the Closed Captioning menu screen.
• Thereare_o"zd_oices:
Caption1, Caption2, Text1,.andText 2.
• F_r_timeyoupz_ss2theOC Mode will changeontt_e
Closed Captioning menu scree_
TVIVCR RAIN MENU
Progremaing
P4cture QuaLity
Tt=e
CLosed Cept4on4n9
CLOSED CAPTIONING
1 CC D_spLey: OFF
2 CC Mode: CAPTION 1
1 £C P_spLay: ON
CLOSED CAPTIONING I
2 CC Mode: CAPTION 1
CLOSED CAPTIONING
1 CC D4spLey: ON WHEN MUTED
2 CC Mode: CAPTION 1
0 Exit
CLOSED CAPTIONING
CC D4spLay: ON
.CO Mode: CAPTION I
CLOSED CAPTIONING
1 CC D4spLey: ON
2 CC Node: CAPTION 2
CLOSED CAPTIONING
1 CC D|spLay: ON
2 CC Mode: TEXT 1
Commercial Skip
Commercial Skip allows you to scan other r..hann_ during'
commezx_z_s.F_chtimeyou pressSEARCH wl_e watching
TVthe Commercial Skip Kmerincreases 30 seconds up to four
minute_The TV/VCR will automatically switch back to the
o"ngizmlc.h&melwhen timerunsout To cancel Commercial
Skip,_ pressing SEARCHum_[SkipTime_disappean
fzomthescreen.
CLOSED CAPTIONING
1 CC DispLay: ON
2 CC Mode: TEXT 2
0 Ex4t
9