RBP Chemical Technology J0145 User Manual

RBP Chemical Technology, Inc.

Product Data Sheet

Date:

08/18

/11

Description:

Re-start 7001

is a water based

alkaline plate cleaner that will effectively remove lint,

Directions for Use:

Hand

– Apply

Re-start 7001

to a clean dampened rag, cloth

, or sponge. W

ipe across

Specifications:

Clear liquid

8.5 lbs/gal

0.41 lbs/gal, 17 g/L, 2

%

> 212

°F

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.RBP Chemical Technology, Inc.

150 S. 118th Street  P.O. Box 14069

Milwaukee, WI 53214-0069

www.rbpchemical.com

Corporate: 414-258-0911

Fax: [phone]

RBP East: 508-865-0800

Supersedes: New

PRODUCT #: J0145

RE-START 7001

High-Performance Alkaline Plate Cleaner

ink, and sensitivity from the printing plate. This product contains ingredients that will
desensitize the non-image area of the plate and provide clean, fast start-ups for
reduced paper waste. Re-start 7001 is easy to use, either by hand or spray and
contains negligible VOC’s and no phosphates.

plate surface until ink and contaminants are removed.

Spray – Squirt the Re-start 7001 onto the dampening roller while press is running to
clean the plate up on a re-start or start-up. Do not over use, as the excess water may
break the web.

Appearance:

Density:

VOC Content:

(EPA Method 24)

Flash Point:

This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.