RBA RBA4090900 Datasheet
Straight Grab Rail
Available Models
RBA4000-030 Straight Grab Rail 300mm
RBA4000-045 Straight Grab Rail 450mm
RBA4000-060 Straight Grab Rail 600mm
RBA4000-075 Straight Grab Rail 750mm
RBA4000-080 Straight Grab Rail 800mm
RBA4000-090 Straight Grab Rail 900mm
RBA4000-100 Straight Grab Rail 1000mm
RBA4000-120 Straight Grab Rail 1200mm
*Additional sizes available upon request
Model RBA4000-Series
Materials & Features
Stainless steel straight grab rails available in a range of lengths meet
the requirements of AS1428.1-2009. The snap ange cover conceals
the xings.
Technical Detail
Rail: 32mm [Dia], 304 Satin Stainless Steel
Fixings: By others
Installation
Warning: Grab rails are no stronger than the anchors or walls to which they are attached and must be rmly secured in order to support the
loads for which they are intended. Refer local codes and Installation Instructions for location of xing points, method of attachment, etc.
Important: Installation instructions and current rough-in details should be furnished with each xture. Do not rough in without certied dimensions. Dimensions are subject to
manufacturer’s tolerance of +/-10mm.
32 83
L
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 07/17 © 2017 by RBA Group TD/Model RBA4000-Series/0717
As improvements in the design and performance of RBA products are continuous, specications may be subject to change without notice.
SYDNEY | MELBOURNE | BRISBANE | PERTH | AUCKLAND
Australia 1300 788 778 www.rba.com.au | New Zealand 0800 722 111 www.rbagroup.co.nz
Loading...