Razor RX200 Instruction manual
Electric Dirt Scooter
OWNER’S MANUAL
Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not refl ect exact appearance of actual product.
Specifi cations subject to change without notice.
Please have your unit and 19 character product I.D. code with you before
contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
RX200_MAN_US_141215.indd 1 12/15/14 5:42 PM
CONTENTS
Safety Warnings ...........................................................................................1-2
Before You Begin..............................................................................................3
Assembly and Set-Up....................................................................................... 4
Charging the Battery ........................................................................................ 5
Pre-Ride Checklist ............................................................................................ 5
SAFETY WARNINGS
WARNING Riding an electric scooter does present potential risks and
caution is required. Like any riding product, an electric scooter has inherent
hazards associated with its use (for example, falling off or riding it into a
hazardous situation). Like any riding product, electric scooters can and are
intended to move and it is therefore, of course, possible to lose control or
otherwise get into dangerous situations. Both children, and adults responsible
for supervising them, must recognize that if such things occur, a rider can
be seriously injured or die even when using safety equipment and other
precautions. RIDE AT YOUR OWN RISK AND USE COMMON SENSE.
WARNING: PARENTAL AND ADULT RESPONSIBILITY AND
SUPERVISION IS NECESSARY: Because products, like electric scooters,
can and do present potential hazards plainly associated with their use, it is
well recognized THE NEED FOR EXERCISE OF PARENTAL RESPONSIBILITY IN
SELECTING RIDING PRODUCTS APPROPRIATE TO THE AGE OF A CHILD, OR
PARENTAL SUPERVISION IN SITUATIONS IN WHICH CHILDREN OF VARIOUS
AGES MAY HAVE ACCESS TO THE SAME RIDING PRODUCTS, IS IMPORTANT.
Not every product is appropriate for every age or size of child, and different
age recommendations are found within this category of product which are
intended to reflect the nature of the hazards and the expected mental or
physical ability, or both, of a child to cope with the hazards.
WARNING: RX200 OFF-ROAD ELECTRIC DIRT SCOOTER IS DIFFERENT
IN MANY WAYS. This off-road electric scooter has inflatable tires, not solid
tires like more basic electric scooters might have. Jumping and hard riding
places greater stresses on tires, wheels and components. Riders who may
intend to use this electric scooter to ride “off road” must be talented and
experienced electric scooter riders able to handle the higher levels of risk and
the higher degrees of expertise associated with such riding.
The recommended minimum rider age is 13 and older. Any rider unable
to fit comfortably on the scooter should not attempt to ride it. A parent’s
decision to allow his or her child to ride this product should be based on the
child’s maturity, skill and ability to follow rules.
Keep this product away from small children and remember that it is
intended for use only by persons who are, at a minimum, completely
comfortable and competent while operating the scooter.
Persons with any mental or physical conditions that may make them
susceptible to injury, impair their physical dexterity or mental capabilities
to recognize, understand, and follow safety instructions and to be able
to understand the hazards inherent in scooter use, should not use or be
permitted to use products inappropriate for their abilities. Persons with heart
conditions, head, back or neck ailments (or prior surgeries to these areas
of the body), or pregnant women, should be cautioned not to operate such
products.
DO NOT EXCEED THE WEIGHT LIMIT OF 154 lb (70 kg). Rider weight
does not necessarily mean a person’s size is appropriate to fit or
maintain control of the scooter.
Usage ............................................................................................................... 6
Repair and Maintenance...............................................................................6-7
Troubleshooting Guide .....................................................................................8
RX200 Electric Scooter Parts ........................................................................... 9
Warranty ........................................................................................................ 11
CHECK AND MAINTAIN SCOOTER CONDITIONS
Before use, check to confirm that any and all chain guards or other covers
and guards are in place and in serviceable condition. Check that the brake
is functioning properly, and that the tires are inflated properly and have
sufficient tread remaining. The scooter should be maintained and repaired
in accordance with the manufacturer’s specifications, using only the
manufacturer’s authorized replacement parts, and should not be modified from
the manufacturer’s original design and configuration.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Always check and obey any local laws or regulations which may
affect the locations where the electric scooter may be used. Keep
safely away from cars and motor vehicle traffic at all times. Only use
where allowed and with caution.
OFF-ROAD RIDING PRESENTS ADDITIONAL RISKS
TO RIDERS AND EQUIPMENT: No electric scooter, not even this
one, is impervious to damage. Off-road riding obviously increases risks of
rider falls and of product damage due to stresses, impacts or wear, and riders
assume all risks associated with high-stress activities:
• Riding in “off-road” conditions can present obstacles, surfaces and
conditions potentially more difficult to master than “ordinary” smooth or
paved surfaces.
• Check your electric scooter before every ride, and replace worn or broken
parts immediately.
• Off-road riding requires skill and practice; it is not “automatic”.
• Always visually review off-road riding terrain before riding, in order to try
to minimize encounters with “unknown” impediments in your path without
time to react or compensate.
This scooter was manufactured for performance and durability, but
it is not impervious to damage. Aggressive riding can over stress or
damage any product, including this scooter, and the rider assumes all
risks associated with high-stress activity.
Do not activate the speed control on the hand grip unless you are on the
scooter and in a safe, outdoor environment suitable for riding.
The normal powered top speed of this scooter will be approximately 12 mph
(19 kmh), which can be affected by conditions, such as rider weight, inclines,
tire inflation and battery charge level. Avoid excessive speeds that can be
associated with downhill rides.
Maintain a hold on the handlebars at all times. Do not touch the brakes or
motor on your scooter when in use or immediately after riding, as these parts
can become very hot.
1
RX200_MAN_US_141215.indd 1 12/15/14 5:42 PM
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
SAFETY WARNINGS
Ride defensively. Watch out for potential obstacles that could catch your
wheel or force you to swerve suddenly or lose control. Be careful to avoid
pedestrians, skaters, skateboards, scooters, bikes, children or animals who
may enter your path, and respect the rights and property of others.
Wet, slick, bumpy, uneven or rough surfaces may impair traction and
contribute to possible accidents. Do not ride your scooter in mud, ice, puddles
or water. Watch out for potential obstacles that could catch your wheel or
force you to swerve suddenly or lose control. Avoid sharp bumps, drainage
grates, and sudden surface changes.
When riding off road, be careful of broken glass, sharp objects or other debris
that may puncture or damage your tires and inner tubes. Select off-road
riding locations free of such dangerous materials.
Do not attempt or do stunts or tricks on your electric scooter. The scooter is
not made to withstand abuse from misuse, such as jumping, curb grinding
or any other type of stunts. Racing, stunt riding, or other maneuvers also
enhance risk of loss of control, or may cause uncontrolled rider actions or
reactions.
Do not exceed the tires’ 60 PSI rating. Over inflation will cause a rupture.
Never allow more than one person at a time to ride the scooter.
Do not ride at night or when visibility is limited.
Never use near steps or swimming pools.
Do not allow hands, feet, hair, body parts, clothing, or similar articles to
come in contact with moving parts, wheels, or drive train chain while the
motor is running.
PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved safety helmet
(with chin strap securely buckled), elbow pads and kneepads. A helmet may
be legally required by local law or regulation in your area. A long-sleeved
shirt, long pants, and gloves are recommended. Always wear athletic shoes
(lace-up shoes with rubber soles) and keep shoelaces tied and out of the way
of the wheels, motor and drive system. Never ride barefooted or in sandals.
USING THE CHARGER
The charger supplied with the electric scooter should be regularly examined
for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the scooter must not be charged until the charger has been repaired
or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from scooter when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
scooter with damp cloth.
FAILURE TO USE COMMON SENSE AND HEED THE WARNINGS
INCREASES RISK OF SERIOUS INJURY. USE WITH APPROPRIATE
CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
Never use headphones, a cell phone or text when riding.
Never hitch a ride with a vehicle.
Do not ride your scooter in wet or icy weather and never immerse the scooter
in water, as the electrical and drive components could be damaged by water
or create other possibly unsafe conditions. Never risk damaging surfaces,
such as carpet or flooring, by use of an electric scooter indoors.
2
RX200_MAN_US_141215.indd 2 12/15/14 5:42 PM
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping.
Because the scooter was 95 percent assembled and packed at the factory, there should not be any problems, even if the
box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 10 minutes for assembly, not including initial charge time.
Allow up to 12 hours for charge (see page 5 for charging information).
Charger
(Note: Charger design may vary
from one shown)
3.
Valve Extender
(Inside Grip)
Twist Grip Throttle
Brake Lever
Handlebar Stem
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR RAZOR
ELECTRIC SCOOTER. The scooter
has been built to certain Razor
design specifications. The original
equipment supplied at the time of
sale was selected on the basis of its
compatibility with the frame, fork and
all other parts. Certain aftermarket
products may not be compatible and
will void the warranty.
Collar Clamp
Front Fork
Required Tools
Motor
1.
On/Off Switch
Charger Port
Reset Button
Battery
Control Module
Product ID Locations:
See locations to the left
1. Handlebar Stem
2. Underneath battery tray
3. Charger
4. UPC side of box (not shown)
2.
Plastic Bag Contents:
• Charger
• Tool
• Owner’s Manual
5 mm Allen wrench
RX200_MAN_US_141215.indd 3 12/15/14 5:42 PM
Valve Extender
(Located in right
handlebar grip)
3
Loading...