How it Works
Razor
Loading...
Pocket Mod Motor Scooter
User Manual
14 pgs1.49 Mb0

Razor Pocket Mod Motor Scooter User Manual

OWNER’S MANUAL
Read and understand this entire manual before riding!
Español .............Página 14
Français ............Page 29
TM
Item Number:
Bistro 15130640 Bella 15130662 Betty 15130661
This manual contains many warnings and cautions concerning the consequences of failing to maintain, inspect or properly use your Pocket Mod. Because any incident can result in serious injury or even death, we do not repeat the warning of potential serious injury or death each time such a possibility is mentioned.
APPROPRIATE RIDER USE AND PARENTAL SUPERVISION
This manual contains important safety information. It is your responsibility to review this information and make sure that all riders understand all warnings, cautions, instructions and safety topics and assure that young riders are able to safely and responsibly use this product. Razor recommends that you periodically review and reinforce the information in this manual with younger riders, and that you inspect and maintain your children’s vehicle to insure their safety.
The recommended rider age of 12 and older for Pocket Mod is only an estimate, and can be affected by the rider’s size, weight or skills. Any rider unable to fit comfortably on the Pocket Mod should not attempt to ride it. A
parent’s decision to allow his or her child to ride this product should be based on the child’s maturity, skill and ability to follow rules.
Keep this product away from small children and remember that this product is intended for use only by persons who are, at a minimum, completely comfortable and competent while operating the vehicle.
DO NOT EXCEED THE WEIGHT LIMIT OF 220 pounds. Rider weight does not necessarily mean a person’s size is appropriate to fit or maintain control of the Pocket Mod.
Do not touch the motor on your Pocket Mod when in use as it can become very hot.
Refer to the section on safety for additional warnings.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Always check and obey any local laws or regulations which may affect the locations where the Pocket Mod may be used on public property. The Pocket Mod is meant to be used only in controlled environments free of potential traffic hazards and not on public streets or sidewalks. Do not ride your Pocket Mod in any areas where pedestrian or vehicle traffic is present.
Ride defensively. Watch out for potential obstacles that could catch your wheel or force you to swerve suddenly or lose control. Be careful to avoid pedestrians, skaters, skateboards, scooters, bikes, children or animals who may enter your path, and respect the rights and property of others.
Do not attempt or do stunts or tricks on your Pocket Mod. The Pocket Mod is not made to withstand abuse from misuse such as jumping, curb grinding or any other type of stunts.
Maintain a hold on the handlebars at all times.
Never carry passengers or allow more than one person at a time to ride the Pocket Mod.
Never use near steps or swimming pools.
Keep your fingers and other body parts away from the drive chain, steering system, wheels and all other moving components.
Never use headphones or a cell phone when riding.
Never hitch a ride with another vehicle.
Do not ride the Pocket Mod in wet weather and never immerse the Pocket Mod in water, as the electrical and drive components could be damaged by water or create other possibly unsafe conditions.
The Pocket Mod is intended for use on solid, flat, clean and dry surfaces such as pavement or level ground without loose debris such as rocks or gravel. Wet, slick or uneven and rough surfaces may impair traction and contribute to possible accidents. Do not drive the Pocket Mod in mud, ice, puddles or water. Avoid excessive speeds that can be associated with downhill rides. Never risk damaging surfaces such as carpet or flooring by use of a Pocket Mod indoors.
Do not ride at night or when visibility is impaired.
PROPER RIDING ATTIRE
Always wear proper protective equipment such as an approved safety helmet, elbow pads and kneepads. A helmet may be legally required by local law or regulation in your area. Always wear shoes, never drive barefooted or in sandals, and keep shoelaces tied and out of the way of the wheels, motor and drive system.
USING THE CHARGER
The charger supplied with the Pocket Mod should be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, the bike must not be charged until the charger has been repaired or replaced.
Use only with the recommended charger.
The charger is not a toy.
Always disconnect from the charger prior to wiping down and cleaning your Pocket Mod with liquid.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS INCREASES RISK OF SERIOUS INJURY. USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
SAFETY WARNINGS
Safety Warnings ............................................................ 1
Before You Begin ........................................................... 2
Assembly and Set-Up .................................................... 3
Repair and Maintenance ............................................. 4-6
1
Troubleshooting Guide ................................................ 7-8
Pocket Mod Parts ..................................................... 9-10
Safety Reminders ........................................................ 12
Warranty ...................................................................... 12
CONTENTS
Remove contents from box. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during shipping. Because the Pocket Mod was 95 percent assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics. Allow up to 15 minutes for assembly, not including initial charge time. Allow up to 12 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
2
WARNING: DO NOT USE NON-RAZOR PRODUCTS WITH YOUR RAZOR POCKET MOD.
The Pocket Mod has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible.
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only as a last resort.
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
5mm hexagonal
key wrench
(included)
Bicycle-style tire pump
for Schrader valve tires,
with pressure gauge
Kick Stand
Charger
Brake Lever
Brake Lever Adjuster
Chain Guard
Speed Control
Front Fork
Charger Plug
Charger Port
Tire
Front Wheel
On/Off Switch
Charger Port
Storage Compartment Under Seat
3
ASSEMBLY AND SET-UP
Charging the Battery
Your Pocket Mod may not have a fully charged battery; therefore it is a good idea to charge the battery prior to use.
• Initial charge time: 12 hours • Run time: up to 40 minutes
• Recharge time: up to 8 hours • Average battery life: 250 charge/discharge cycles depending on the level of depletion
1 Plug the charger port into
the port on the Pocket Mod. The charger works with the power switch in either the on or off position.
2 Plug the charger plug into a wall
outlet.
WARNING: Rechargeable batteries are only to be charged under adult supervision. Always disconnect your Pocket Mod from the charger before cleaning with liquid.
Note: If your charger does not look like the one illustrated, your unit has been supplied with an alternative charger. The specifications and charging procedure would not change.
The charger has a small window with one LED or two LEDs to indicate the charge status. Refer to the illustration on the charger unit for the actual “charging” and “charged” status indications for your model charger.
Chargers have built-in over-charge protection to prevent battery from being over-charged.
Be sure to properly align the groove on the charger input plug with the corresponding socket on the case; otherwise, no charging action will occur.
Charger Plug
Charger Port
WARNING: Failing to properly adjust and tighten the clamps and retainers that affix the handlebar can cause you to lose control and fall.
1 Insert handlebar assembly
through front fairing and into fork until it stops. Raise to desired height keeping the stem and fairing aligned within the red arrows of the safety zone.
2 Tighten down the hexagonal
bolt with the 5mm hexagonal key wrench.
Attaching the Handlebars
1 Remove the packing material
from the front fork.
2 Insert the wheel into the front
fork with the lock washers on the outside of the fork.
Attaching the Front Wheel
3 Insert the tab on the lock
washer into the hole on the front fork and tighten the nuts with the supplied wrenches.
WARNING: The brake is capable of skidding the tire and throwing an unsuspecting rider. Practice in an open area free from obstacles until you are familiar with the brake function. Avoid skidding to a stop as this can cause you to lose control or damage the rear tire.
Note: The brake lever contains a safety switch to stop the motor when the brake is applied. In an emergency, applying the brake will always stop the motor. Do not disable or replace this lever with anything other than a genuine Razor replacement part.
4
REPAIR AND MAINTENANCE
Check the Razor web site for any updates on the latest repair and maintenance procedures.
Turn power switch off before conducting any maintenance procedures.
❑ Adjusting the Brakes
1 To adjust the play, thread the
brake lever adjuster in or out 1/4 to 1/2 turn until the desired brake adjustment is attained. Most adjustments are complete at this step. If brake still needs further adjustment, proceed to step 2.
2 If the brake lever adjuster is
threaded outward and the brake still has too much slack, use the rear brake adjuster for additional adjustment.
Testing the Brakes
To use the brake, squeeze the lever to increase the pressure on the brake. The brake lever is fitted with a cable adjuster to compensate for cable stretch and/or to fine-tune the lever movement to brake engagement. If brake is not engaging properly, follow instructions for adjusting the brakes outlined on the next page.
❑ Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your purchase.
1 Using a bicycle style tire pump
equipped for a Schrader-type valve, inflate the front tire to the PSI indicated on the sidewall of the tire.
Note: The pressurized air supplies found at gasoline stations are designed to inflate high-volume automobile tires. If you decide to use such an air supply to inflate your Pocket Mod tires, first make sure the pressure gauge is working, then use very short bursts to inflate to the correct PSI. If you inadvertently over-inflate the tire, release the excess pressure immediately.
ASSEMBLY AND SET-UP
Loading...
+ 9 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use