Razor Ecosmart Metro User Manual
OWNER’S MANUAL
Read and understand this entire manual BEFORE riding!
For assistance contact Razor. DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only. Illustrations
may not refl ect exact appearance of actual product. Specifi cations subject to
change without notice.
Please have your product and 19 digit product I.D. code ready before
contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
v1_1206
Item Number: 13114501
CONTENTS
Safety Warnings ............................................................ 1
Before You Begin ........................................................... 2
Assembly and Set-Up ................................................. 3-4
Repair and Maintenance ............................................. 5-6
SAFETY WARNINGS
WARNING: Riding electric product can be a hazardous activity.
Certain conditions may cause the equipment to fail without fault of the
manufacturer. Like other electric products, the EcoSmart Metro electric scooter
can and is intended to move, and it is therefore possible to lose control, fall
off and/or get into dangerous situations that no amount of care, instruction or
expertise can eliminate. If such things occur you can be seriously injured or die,
even when using safety equipment and other precautions. RIDE AT YOUR OWN
RISK AND USE COMMON SENSE.
This manual contains many warnings and cautions concerning the
consequences of failing to maintain, inspect or properly use your EcoSmart
Metro electric scooter. Because any incident can result in serious injury or even
death, we do not repeat the warning of possible serious injury or death each
time such a possibility is mentioned.
APPROPRIATE RIDER USE AND
PARENTAL SUPERVISION
This manual contains important safety information. It is your responsibility to
review this information and make sure that all riders understand all warnings,
cautions, instructions and safety topics and assure that young riders are able to
safely and responsibly use this product. Razor recommends that you periodically
review and reinforce the information in this manual with younger riders, and
that you inspect and maintain your teen’s scooter to insure their safety.
The recommended rider age of 16 and older for the EcoSmart Metro electric
scooter is only an estimate, and can be affected by the rider’s size, weight and/
or skills. Any rider unable to fit comfortably on the scooter should not attempt
to ride it. A parent’s decision to allow his or her teen to ride this product
should be based on the teen’s maturity, skill and ability to follow rules.
Keep this product away from small children and remember that this product
is intended for use only by persons who are, at a minimum, completely
comfortable and competent while operating the product.
DO NOT EXCEED THE WEIGHT LIMIT OF 220 pounds (100kg).
Rider weight does not necessarily mean a person’s size is appropriate to fit
or maintain control of the EcoSmart Metro electric scooter.
Do not touch the brakes or motor on your EcoSmart Metro electric scooter
when in use as these parts can become very hot.
Troubleshooting Guide ................................................ 8-9
EcoSmart Metro Scooter Parts.................................... 11
Safety Reminders ........................................................ 12
Warranty ...................................................................... 12
Maintain a hold on the handlebars at all times. Do not activate the throttle unless
you are on the product and in a safe, outdoor environment suitable for riding.
Never carry passengers or allow more than one person at a time to ride the
EcoSmart Metro electric scooter.
Never use near steps or swimming pools.
Keep your fingers and other body parts away from the drive chain, steering
system, wheels and all other moving components.
Never use headphones or a cell phone when riding.
Never hitch a ride with another vehicle.
The EcoSmart Metro electric scooter can operate more quietly than other
motorized products may operate. Use care when in the vicinity of pedestrians
or others who may have difficulty hearing your approach. Use handbell (not
included) to sound warnings when appropriate.
Do not ride the EcoSmart Metro electric scooter in wet or icy weather and never
immerse the product in water, as the electrical and drive components could be
damaged by water or create other possibly unsafe conditions.
The EcoSmart Metro electric scooter is intended for use on flat, dry surfaces
such as pavement or level ground without loose debris such as sand, leaves,
rocks or gravel. Wet, slick, bumpy, uneven or rough surfaces may impair traction
and braking and contribute to possible accidents. Do not ride the EcoSmart
Metro electric scooter in mud, ice, puddles or water. Avoid excessive speeds
that can be associated with downhill rides. Never risk damaging surfaces such
as carpet or flooring by use of an EcoSmart Metro electric scooter indoors.
Do not ride at night or when visibility is impaired.
PROPER RIDING ATTIRE
Always wear proper protective equipment such as an approved safety helmet
(with chin strap securely buckled), elbow pads and kneepads. A helmet may be
legally required by local law or regulation in your area. A long-sleeved shirt,
long pants and gloves are recommended. Always wear athletic shoes (laceup shoes with rubber soles), never ride barefooted or in sandals, and keep
shoelaces tied and out of the way of the wheels, motor and drive system.
Refer to the section on safety reminders for additional warnings.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Always check and obey any local laws or regulations which may
affect the locations where the EcoSmart Metro electric scooter may
be used. Ride defensively. Watch out for potential obstacles that could catch
your wheel or force you to swerve suddenly or lose control. Be careful to avoid
pedestrians, skaters, skateboards, scooters, bikes, children or animals who may
enter your path, and respect the rights and property of others.
Do not attempt or do stunts or tricks on your EcoSmart Metro electric scooter.
The scooter is not made to withstand abuse from misuse such as jumping,
curb grinding or any other type of stunts.
This product was manufactured for performance and durability, but is not
impervious to damage. Jumping or other aggressive riding can over-stress
and damage any product, including the EcoSmart Metro electric scooter, and
the rider assumes all risks associated with high-stress activity.
Be careful and know your limitations. Risk of injury increases as the degree
of riding difficulty increases. The rider assumes all risk associated with
aggressive riding activities.
USING THE CHARGER
The charger supplied with the electric product should be regularly examined for
damage to the cord, plug, enclosure and other parts. In the event of such damage,
the product must not be charged until the charger has been repaired or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Make sure power switch is in the “off” position, unplug charger and
disconnect from product when not in use.
Do not exceed charging time.
Always disconnect from the charger prior to wiping down and cleaning
your scooter.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS
INCREASES RISK OF SERIOUS INJURY. USE WITH APPROPRIATE
CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION.
1
BEFORE YOU BEGIN
Remove contents from box. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the EcoSmart Metro electric scooter was 95 percent assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 5 for charging information).
Throttle
Brake Lever
Adjuster
Brake Lever
T-tube
Seat
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
ECOSMART METRO
ELECTRIC SCOOTER. The
scooter has been built to certain
Razor design specifications. The
original equipment supplied at the
time of sale was selected on the
basis of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Headset
Front Fork
Required Tools
Clamp
Front Wheel
Frame
Deck Plate
On/Off Switch
Battery Pack
and Motor Controller
Clamp
Luggage Rack
Motor
Brake
Rear Wheel
Kick Stand
Charging Port
Charger Port
Charger Plug
Phillips screwdriver
(included)
5 mm
Allen wrench
(included)
13/15mm open wrench and
8/10mm open wrench
(included)
Spoke tightener
(included)
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll free 866-467-2967 Monday - Friday 8AM - 5PM Pacific Time. Please have the
product I.D. code located on the white label on your product or back of charger available for better assistance.
2
ASSEMBLY AND SET-UP
q Attaching the Front Wheel
A
B
B
A
1 Remove the packing material
from the front fork.
2 Remove axle nuts (A) from the
axle bolt and insert the wheel into
the front fork. Safety washers
should face outside of the fork.
q Attaching the Handlebar
1 Face the handlebars forward
with the throttle on the right and
brake on the left, depress the
push button located on the front
fork and insert the handlebar
stem until the button locks
securely into the stem.
2 Tighten the collar clamp using a
5mm Allen wrench.
3 Insert the tab on the safety
washer (B) into the hole on the
front fork and tighten axle nuts
using two 15mm open wrenches.
WARNING: Failure to
properly tighten the collar bolts may
allow the handlebars to dislodge
while riding and may cause you
to lose control and fall. When
correctly tightened, the handlebars
will not rotate out of alignment
with the front wheel under normal
circumstances.
Note: The cable and wire assembly
from the handlebar must not be
wrapped around the steering
tube or handlebar. Sharp bends
or twisting of the brake cable can
cause the brakes to malfunction.
q Attaching the Seat and Luggage Rack
1
Slide the seat tube through the
luggage rack and into the frame
tube down to the safety line on the
seat tube.
2 The clamp of the luggage rack
should be above the seat clamp.
Adjust seat to the desired height.
Seure the seat by tightening the
collar clamp bolt using a 5mm Allen
wrench.
WARNING: Failure to
properly install and tighten the
screws, nuts and bolts that affix
seat can cause you to lose control
and crash.
3 Adjust the luggage rack to the
desired height and tighten the 4
bolts on the luggage rack with
5mm Allen wrench and 10mm open
wrench.
3
Loading...