Razor DRIFT RIDER Owner's Manual
OWNER’S MANUAL
Read and understand this entire manual before allowing
child to use this product! For assistance contact Razor.
DO NOT RETURN TO STORE.
NOTE: Manual illustrations are for demonstration purposes only.
Illustrations may not reflect exact appearance of actual product.
Specifications subject to change without notice.
Please have your product along with the 19 character product I.D. code with you
before contacting Razor for warranty assistance and/or replacement parts.
Product I.D. Code: _____________ - ____________ - ____________
DRIFT RIDER™ ELECTRIC DRIFT CYCLE
1
CONTENTS
SAFETY WARNINGS
Safety Warnings ...........................................................................................1-2
Before You Begin..............................................................................................3
Assembly and Set-up .................................................................................... 4-7
Charging the Battery ........................................................................................ 8
Pre-Ride Checklist ............................................................................................ 8
Usage ............................................................................................................... 9
Repair and Maintenance...........................................................................10-17
Troubleshooting Guide ...................................................................................18
Drift Rider Parts.............................................................................................. 19
Warranty ........................................................................................................ 20
Contact Information ....................................................................................... 22
This manual contains many warnings and cautions concerning the
consequences of failing to maintain, inspect or properly use your Drift Rider.
Because any incident can result in serious injury or even death, we do not
repeat the warning of potential serious injury or death each time such a
possibility is mentioned.
WARNING: Riding an electric Drift Rider does present potential risks
and caution is required. Like any riding product, an electric Drift Rider has
inherent hazards associated with its use (for example, falling off or riding
it into a hazardous situation). Like any riding product, electric Drift Riders
can and are intended to move and it is therefore, of course, possible to lose
control or otherwise get into dangerous situations. Both children and adults
responsible for supervising them must recognize that if such things occur, a
rider can be seriously injured or die, even when using safety equipment and
other precautions. Certain conditions may cause the equipment to fail without
fault of the manufacturer. RIDE AT YOUR OWN RISK AND USE
COMMON SENSE.
This manual contains important safety information. It is your responsibility to
review this information and make sure that all riders understand all warnings,
cautions, instructions and safety topics, and assure that young riders are
able to safely and responsibly use this product. Razor recommends that you
periodically review and reinforce the information in this manual with younger
riders, and that you inspect and maintain your child’s Drift Rider to ensure
their safety.
WARNING: PARENTAL AND ADULT RESPONSIBILITY AND
SUPERVISION IS NECESSARY: Because products, like electric Drift Riders,
can and do present potential hazards plainly associated with their use, it is
well recognized THE NEED FOR EXERCISE OF PARENTAL RESPONSIBILITY IN
SELECTING RIDING PRODUCTS APPROPRIATE TO THE AGE OF A CHILD, OR
PARENTAL SUPERVISION IN SITUATIONS IN WHICH CHILDREN OF VARIOUS
AGES MAY HAVE ACCESS TO THE SAME RIDING PRODUCTS, IS IMPORTANT.
Not every product is appropriate for every age or size of child, and different
age recommendations are found within this category of product which are
intended to reflect the nature of the hazards and the expected mental or
physical ability, or both, of a child to cope with the hazards.
The recommended rider age is 9 and older. Any rider unable to fit
comfortably on the Drift Rider should not attempt to ride it. A parent’s
decision to allow his or her child to ride this product should be based on the
child’s maturity, skill and ability to follow rules. Razor emphasizes that adults
are strongly advised not to disregard Razor’s recommendations or permit
younger children to ride the Drift Rider.
Keep this product away from small children and remember that it is
intended for use only by persons who are, at a minimum, completely
comfortable and competent while operating the Drift Rider.
Persons with any mental or physical conditions that may make them
susceptible to injury, impair their physical dexterity or mental capabilities
to recognize, understand, and follow safety instructions and to be able to
understand the hazards inherent in Drift Rider use, should not use or be
permitted to use products inappropriate for their abilities. Persons with
heart conditions, head, back or neck ailments (or prior surgeries to these
areas of the body), or pregnant women, should be cautioned not to operate
such products.
DO NOT EXCEED THE WEIGHT LIMIT OF 143 lb (65 kg). Rider weight
does not necessarily mean a person’s size is appropriate to fit or
maintain control of the Drift Rider.
CHECK AND MAINTAIN DRIFT RIDER CONDITIONS
Before use, confirm that any and all guards or other covers are in place and in
serviceable condition. Check that the wheels are free of flat spots from wear.
Always inspect product before riding and regularly maintain it. Replace worn
or damaged parts immediately. Check brake for proper function. When you
squeeze the lever, brake should provide positive braking action. The product
should be maintained and repaired in accordance with the manufacturer’s
specifications, using only the manufacturer’s authorized replacement parts,
and should not be modified from the manufacturer’s original design
and configuration.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Always check and obey any local laws or regulations which may
affect the locations where the electric Drift Rider may be used. Keep
safely away from cars and motor vehicle traffic at all times, and only
use where allowed and with caution.
Do not activate the throttle on the hand grip unless you are on the Drift Rider
and in a safe, outdoor environment, suitable for seated riding.
The normal powered top speed of this Drift Rider will be approximately 9 mph
(14 km/h), which can be affected by conditions, such as rider weight, inclines,
and battery charge level. Avoid excessive speeds that can be associated with
downhill rides.
Maintain a hold on the handlebars at all times. Do not touch the brake or hub
motor on your Drift Rider when in use or immediately after riding as these
parts can become very hot.
Ride defensively. Watch out for potential obstacles that could catch your
wheel or force you to swerve suddenly or lose control. Be careful to avoid
pedestrians, skaters, skateboards, Drift Riders, bikes, children or animals who
may enter your path, and respect the rights and property of others.
The electric Drift Rider is intended for use on flat, dry surfaces, such as
pavement or level ground, without loose debris, such as sand, leaves, rocks or
gravel. Wet, slick, bumpy, uneven or rough surfaces may impair traction and
contribute to possible accidents. Do not ride your product in mud,
ice, puddles or water. Avoid sharp bumps, drainage grates, and sudden
surface changes.
Do not attempt or do stunts or tricks on your electric Drift Rider. The Drift
Rider is not made to withstand abuse from misuse, such as jumping, curb
grinding or any other type of stunts. Racing, stunt riding, or other maneuvers
also enhance risk of loss of control, or may cause uncontrolled rider actions
or reactions.
Never allow more than one person at a time to ride the product.
Do not ride at night or when visibility is limited.
Never use near steps or swimming pools.
Do not allow hands, feet, hair, body parts, clothing, or similar articles to
come in contact with moving parts or wheels, while the motor is running.
Never use headphones, a cell phone or text when riding.
Never hitch a ride with a vehicle.
Do not ride your product in wet or icy weather and never immerse in water,
as the electrical and drive components could be damaged by water or create
other possibly unsafe conditions. Never risk damaging surfaces, such as
carpet or flooring, by use of an electric Drift Rider indoors.
2
PROPER RIDING ATTIRE
Always wear proper protective equipment, such as an approved safety helmet
(with chin strap securely buckled), elbow pads, and kneepads. A helmet may
be legally required by local law or regulation in your area. A long-sleeved shirt,
and long pants are recommended. Always wear shoes and keep shoelaces
tied and out of the way of the wheels and motor. Never ride barefooted or in
sandals.
USING THE CHARGER
The charger supplied with the electric Drift Rider should be regularly examined
for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the product must not be charged until the charger has been repaired
or replaced.
Use only with the recommended charger.
Use caution when charging.
The charger is not a toy. Charger should be operated by an adult.
Do not operate charger near flammable materials.
Unplug charger and disconnect from product when not in use.
Always disconnect from the charger prior to wiping down and cleaning your
product with damp cloth.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS
FURTHER INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN
RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE
OPERATION. USE CAUTION.
SAFETY WARNINGS
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
3
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect
the contents of the box for scratches in the paint or dents that may have occurred during shipping. Because your product
was partially assembled and packed at the factory there should not be any problems, even if the box has a few scars or
dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Allow up to 15-20 minutes for assembly, not including initial charge time.
Allow up to 5 hours for charge (see page 8 for charging information).
2.
Charger
(Note: Charger design may
vary from one shown)
Throttle
Foot Pad
Hand Brake
1. Battery Cover
Rear Caster Wheel
Seat
3. Frame
Hub Motor
5 mm Allen Wrench Phillips Screwdriver /
5 mm Allen Wrench
(Combination Tool)
10 mm / 13 mm Wrench
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR Drift Rider.
The Drift Rider has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
your warranty.
Product ID Locations:
(See locations to the left)
1. Behind Battery Cover
2. Charger
3. Underneath Frame
Plastic Bag Contents:
• Charger
• Tools
• Owner’s Manual
• Eight (8) Phillips Screws
Required Tools
4
ASSEMBLY AND SET-UP
Attaching the Frame
Required Tools: Two (2) 5 mm Allen wrenches
Attaching the Handlebar Unit
Required Tool: 5 mm Allen wrench
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
1 Using the two (2) 5 mm Allen wrenches,
remove the two (2) coupling bolts at the end of
the frame.
4 Securely tighten the two (2) coupling bolts
on the rear frame using the two (2) 5 mm
Allen wrenches.
2 Remove and discard the plastic insert.
3 Insert the rear frame into the wheel assembly.
1 Using the 5 mm Allen wrench, remove the
steering bolt from the handlebar unit.
2 Insert the frame and wheel assembly into the
handlebar unit.
5
ASSEMBLY AND SET-UP
Attaching the Handlebar Unit Cont.
Required Tool: 5 mm Allen wrench
Attaching the Seat
Required Tools: 5 mm Allen wrench, Phillips screwdriver, 13 mm wrench.
3 Reinsert the steering bolt and secure using the
5 mm Allen wrench.
1-1 Insert left foot support into seat.
3-1 Insert right foot support into seat.
1-2 Press firmly until click is heard.
2 Install the four (4) screws (included in bag with
the manual) using the Phillips screwdriver.
WARNING: Failing to
properly tighten the steering
bolt that attaches the front fork
assembly to the down tube
assembly can cause you to lose
control and fall.
6
Attaching the Seat Cont.
Required Tools: 5 mm Allen wrench, Phillips screwdriver, 13 mm wrench.
ASSEMBLY AND SET-UP
3-2 Press firmly until click is heard.
6 Install seat/foot rest assembly.
4 Install the four (4) screws (included in bag
with the manual) using the Phillips screwdriver.
5 Remove four (4) foot rest bolts using the 5 mm
Allen wrench.
8 Install two (2) seat flat washers and nuts loosely using the 13 mm wrench.
7 Install four (4) foot pad bolts with washers loosely using the 5 mm Allen wrench.
Loading...