4. GETTING STARTED .................................................................................................................................. 7
5. USING YOUR HEADSET ......................................................................................................................... 10
6. SAFETY AND MAINTENANCE ................................................................................................................ 18
▪ PlayStation®4 / PlayStation®5 or PC (Windows® 10 64-bit or higher)
▪ USB Type-C or Type-A port
▪ Devices with Bluetooth audio capability
Razer Audio App requirements
▪ iOS 12 / Android 8.1 Oreo (or higher) device with Bluetooth connectivity
▪ Internet connection for app installation
Page 6
FOR GA ME R S. BY G AM ER S.™
5
2. LET’S GET YOU COVERED
Your product’s
serial number can
be found here.
You’ve got a great device in your hands, complete with a 2-year limited warranty coverage. Now
maximize its potential and score exclusive Razer benefits by registering at
razerid.razer.com
Got a question? Ask the Razer Support Team at
support.razer.com
Page 7
FOR GA ME R S. BY G AM ER S.™
6
3. TECHNICAL SPECIFICATIONS
HEADPHONES
▪ Frequency response: 20 Hz – 20k Hz
▪ Impedance: 32Ω at 1 kHz
▪ Sensitivity (@1 kHz): 108 dB
▪ Drivers: 50 mm, with Neodymium magnets
▪ Inner ear cup diameter: Width 45mm / Length 65mm
▪ Oval ear cushions: Designed for full-ear coverage with heat-transfer fabric, perfect for long-
wearing comfort
▪ Connection type: Wireless via Type-C dongle / Bluetooth
▪ Wireless range: 10 m / 30 ft
▪ Wireless frequency: 2.4 GHz
▪ Battery life: Up to 30 hours
MICROPHONE
▪ Fixed mic boom
▪ Frequency response: 100 – 10,000 Hz
▪ Signal-to-noise ratio: > 60 dB
▪ Sensitivity (@1 kHz): -54 ± 3 dB
▪ Pick-up pattern: Unidirectional
RANGE
▪ Bluetooth wireless range: Up to 10 m / 30 ft
SYSTEM REQUIREMENT
▪ PlayStation 5 / PlayStation 4
▪ PC
▪ Devices with Bluetooth audio capacity
Page 8
FOR GA ME R S. BY G AM ER S.™
7
4. GETTING STARTED
Indicator
Battery level
Charging
Fully charged
CHARGING THE HEADSET
Connect the Razer Kaira to a powered USB port using the charging cable. For best results, please fully
charge the headset before using it for the first time. A depleted headset will fully charge in about 4
hours.
Page 9
FOR GA ME R S. BY G AM ER S.™
8
CONNECTING YOUR HEADSET
Indicator
Status
Connected
Press and
hold
A. TO A PLAYSTATION CONSOLE / PC VIA 2.4GHZ
1. Plug the Type-C wireless dongle to your PlayStation console or PC.
2. Press and hold the Power button until the status indicator is briefly lit or until you hear a voice
prompt.
3. Wait until the status indicator briefly becomes static green indicating that the headset is now
connected to the Type-C wireless dongle.
Page 10
FOR GA ME R S. BY G AM ER S.™
9
4. On your PlayStation console or PC, set the Razer Kaira as the default Input and Output Device.
Paired
Pairing
On PlayStation 5, go to Settings > Sound
• On Microphone, set the Input Device to Razer Kaira (2.4).
• On Audio Output, set the Output Device to Razer Kaira (2.4).
On PlayStation 4, go to Settings > Devices > Audio Devices
• Set the Input Device and Output Device to Razer Kaira (2.4).
On PC / Laptop
a. Right click on the sound icon on the system tray and then select Open Sound settings.
b. On the Sound window, set Razer Kaira (2.4) as the default Output and Input device.
B. TO OTHER DEVICES VIA BLUETOOTH
While powered on, press the Razer SmartSwitch / EQ button for 5 seconds to activate Bluetooth
pairing mode. Follow your device’s instructions and select “Razer Kaira (BT)” from the list of found
devices. The status indicator will briefly change to static blue to indicate that the headset is now
paired with your device.
RAZER SMARTSWITCH
With the Razer Kaira connected to a PC or PlayStation console (via 2.4 GHz) and a mobile device (via
Bluetooth), you’ll be able to manage calls from your mobile device even while gaming on your PC or
Page 11
FOR GA ME R S. BY G AM ER S.™
10
PlayStation console. The status indicator will briefly show static white to indicate that the headset is
connected to both audio sources.
5. USING YOUR HEADSET
BATTERY LEVEL
When unplugged and powered on, the status indicator will show the connection and battery status.
Page 12
FOR GA ME R S. BY G AM ER S.™
11
While in use, you’ll hear a voice prompt when the headset needs to be recharged; during such time,
Indicator
Battery
Level
Low
Prompt
Voice
OFF
ON
the indicator will continue showing the battery level until you charge the headset.
POWER BUTTON
Power ON / OFF
Power on the headset by holding the Power button until the status indicator is on; and holding the
Power button again to turn off. An audio prompt will help notify you when the headset is powered on
or off.
Other functions
Other power button functions are available when the headset is powered on and connected to your
device via Bluetooth. These functions operate based on your device’s current activity.
Page 13
FOR GA ME R S. BY G AM ER S.™
12
Single press
Play/pause
Accept incoming call or end current call
Put call on-hold and accept incoming call
End call and swap to on-hold call
Double press
Reject incoming call
Swap calls
Skip track
Triple press
Previous track
While powered off, press and
hold for 5 seconds
Activate Bluetooth pairing mode
Some features listed here may not be applicable to certain devices.
RAZER SMARTSWITCH / EQ BUTTON
Switching EQ Presets
Press the Razer SmartSwitch / EQ button to switch between Default, Amplified, Enhanced Bass, FPS,
and Custom* EQ presets available on the headset.
Page 14
FOR GA ME R S. BY G AM ER S.™
13
Press
Double
press
*This preset will only be available when you customize a preset on the Razer Audio app.
Switching audio source
When powered on and connected to any audio source, double press the Razer SmartSwitch / EQ
button to switch between 2.4 GHz and Bluetooth audio source or vice versa.
Using Bluetooth as the audio source will reconnect the headset to the last known device. Pairing
mode will be activated if no device is found.
Enable / Disable Gaming Mode
While connected via Bluetooth, triple press the Razer SmartSwitch / EQ button then hold the last
press for 2 seconds to activate Gaming Mode. Once enabled, the headset will function at a lower
latency; giving you real-time audio feedback while gaming. Repeat to disable gaming mode.
Page 15
FOR GA ME R S. BY G AM ER S.™
14
This feature is only available on Bluetooth connection. For best performance, it is recommended
to keep the headset within a very close distance of the audio source.
VOLUME WHEEL
Rotate the Volume wheel to increase or decrease the volume.
SIDETONE WHEEL
Rotate the Sidetone wheel to adjust the volume of your voice that you can hear through the headset.
Page 16
FOR GA ME R S. BY G AM ER S.™
15
RAZER™ HYPERCLEAR CARDIOID MIC
Mic diaphragm
Air vent
Bend the RazerTM HyperClear Cardioid mic until it is parallel to your mouth. Make sure the mic
diaphragm is in front and the air vent is facing away from your mouth.
Slide the mic mute switch to mute or unmute the microphone.
Page 17
FOR GA ME R S. BY G AM ER S.™
16
COMFORT
It’s recommended to gently stretch the headset before placing it over your head to minimize
headband stress, however, don’t stretch the headset beyond its limits.
RAZER AUDIO APP
Making advanced customization just got a whole lot easier for your Razer Kaira. With the Razer Audio
app, personalize your own EQ setting or cycle through presets, customize its auto shutoff feature, and
much more — anytime, anywhere.
Page 18
FOR GA ME R S. BY G AM ER S.™
17
AUDIO APP
RZR.TO/AUDAPP
(For China Only)
OR
When using the app, make sure that the headset is only connected to your mobile device via
Bluetooth. A solid blue status indicator indicates this connection.
Page 19
FOR GA ME R S. BY G AM ER S.™
18
6. SAFETY AND MAINTENANCE
SAFETY GUIDELINES
In order to achieve maximum safety while using your Razer Kaira, we suggest that you adopt the
following guidelines:
Should you have trouble operating the device properly and troubleshooting does not work, unplug
the device and contact the Razer hotline or go to
Do not take apart the device (doing so will void your warranty) and do not attempt to operate it
under abnormal current loads.
Keep the device away from liquid, humidity or moisture. Operate the device only within the specific
temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug
and/or switch off the device in order to let the temperature stabilize to an optimal level.
The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of
your external surroundings. Please remove the device when engaging in any activities that requires
active awareness of your surroundings.
Listening to excessively loud volumes over extended periods of time can damage your hearing.
Furthermore, legislation of certain countries permits a maximum sound level of 86db to affect your
hearing for 8 hours a day. We therefore recommend that you reduce the volume to a comfortable
level when listening for prolonged periods of time. Please, take good care of your hearing.
support.razer.com for assistance.
MAINTENANCE AND USE
The Razer Kaira requires minimum maintenance to keep it in optimum condition. Once a month we
recommend you clean it using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or
harsh cleaning agents.
BATTERY WARNING
The Razer Kaira contains a Li-ion rechargeable battery. In general, the life expectancy of such batteries
is dependent upon usage. If you suspect that the Li-ion rechargeable battery inside the Razer Kaira
may be drained (has a low charge), try charging it.
Caution: Do not open, mutilate, or expose to conducting materials (metal), moisture, liquid, fire, or
heat. Doing so may cause batteries to leak or explode, resulting in personal injury. Battery life varies