Raytec RAYMAX 25 PoE User Manual

MAX 25 PoE

illuminators installation guide

This installation guide provides instructions for installing the RAYMAX 25 PoE
series illuminators.

Installation Steps

1. Mount Illuminator

2. Connect Power

Set Up Steps

1. Optional night set-up for optimum
image performance

2. Adjust vertical angle

3. Tighten all fixings

Package Contents

1. Illuminator with Integrated PSU

Overview

RAYMAX 25 PoE illuminator

Integrated PSU

(back of illuminator)

Version 6.0

Standard U Bracket

LED illuminator

Power Indicator

- telemetry input
requires zero volt

Telemetry Control

Power On

Power

!

adjust

P-cell
adjust

PoE Input

PoE

Install

internally only

Specifications subject to change without notice. Installation to be carried out by suitable trained and qualified personnel.

Install in a well
ventilated area

latched input, non
polarity sensitive

12V DC
24V AC/DC

instead of PoE)

1.5 m

Do not continually

stare at lamp

2

(Optional input

Installation

Set Up

INTERNAL USE ONLY

!

1

2

Mount illuminator

1

Connect Power

2

TARGET

1

Optional night set-up
for optimum image
performance

Use wall bracket if you require horizontal adjustment.

2 3

Adjust vertical angle

Tighten all fixings

Match illumination to camera field of view

Camera

Camera

Reduces performance May cause hot spots Best performance

x x

Light

Light

Light

Camera

3

Technical Drawings (Not to scale)

Standard Bracketry

8.5mm
(0.3”)

48mm

(1.9”)

25mm

(1”)

47mm

(1.9”)

23.5mm
(0.9”)

RM 25 PoE

Specifications

INFRA-RED Series

Input Output PoE Photocell

PoE or

12V DC

24AC/DC

12W

IEEE802.3af
Compliant Interface
Power classification

(class 0)

CAT5 Cable

Integrated

(adjustable

sensitivity)

Optional Bracketry

Wall Mount

Adjustable

Power

10% - 100%

Weight

0.8kg

(1.8lbs)

Dimensions

L x W x D

75 x 100 x 54mm

3” x 4” x 2”

(approx)

Command and Control
Integrated Power Supply Features

• Adjustable photocell

• Adjustable power

• Telemetry input

4

Trouble Shooting

Step 1: Basics

Check blue LED ‘power on’ light is illuminated on the back of the PoE unit.

If Ye s ,

• Ensure power adjust is turned to the maximum level.

• Ensure Photocell is covered and if necessary adjust the photocell
sensitivity.

If No,

• Confirm that the PoE injector unit is fully functioning.

NB: Refer to manufacturer’s guide

• Check that the cable is fully intact, and not broken or split.

Step 2: Set-up Camera, lens and illumination

Check alignment of lamp

Check camera lens – fully open at night & set correctly.

Check model number to Raytec performance specification to ensure
required distance is achievable.

Step 3: Call Raytec for further assistance

Note down:

• Model and serial number of illuminator

• Camera make and model

• Lens make and model

If the Raytec lamp is still not delivering the required performance, please
contact us for further assistance: tel [phone]

5

PoE/13/6.1

UK / Europe
T: [phone]
F: [phone]
[e-mail]

Americas (Toll Free)
T: [phone]
[e-mail]

www.rayteccctv.com