Raysgem Loona User Manual

RC133N1

13.3

All pictures in this manual are for reference only, actual product may dier. No further

notice will be released on small modifications.

Thank you for purchasing this RAYSGEM smart mirro r. Before installation, please

Note: In case of electric shock, please do not try to open the
mirror.
When malfunction happens, please consult a profession before
you open the mirror.

This is a sign of high voltage danger. Any contact with
the internal parts can be extremely dangerous.

This is for important notes of how to maintain the
mirror.

Warning

Do not try to open the mirror in case of electric shock

·Please keep the mirror away from any heat or under direct sun light.

·Please keep the mirror away from anything that can generate heat, such as candles, ashtrays, incensation,
combustible gas or explosive substance.

·Please do not overload your wall sockets, extension power cables.

·Please place the power cable properly without anything pressing again the power cable.

·For safety reasons, please unplug mirror power in storm weather or when you won't be using mirror for a long
time.

·Please use proper direct current supply for the mirror. Make sure your local DC power is within safety range.

·In case of any electric shock, please do not insert any metal object into mirror sockets.

·Please make sure power jack is plugged in tightly into your power socket. Unplug power jack when you
disconnect the mirror.

·Please do not touch mirror's power cable with wet hands.

·In case of any malfunction, especially when there's unusual sound or smell coming out of the mirror, please
unplug the power and contact your supplier immediately.

·If you'll be leaving the mirror unused for a very long time or traveling with our senior family members, children
and people with disabilities at home, please make sure to unplug the mirror.

·Too much dirt on the power socket or cable might generate heat and cause insulation aging, please keep it clean
in case of electric shock and fire.

·Please make sure your power socket is well grounded in case of electric shock or damage to the mirror.

·To unplug the mirror is to unplug from your power socket, for convenience, we recommend you to use power
socket with its own ON/OFF switch.

·Please do not allow children to play with the mirror.

·Please install the mirror in a safe place, any wobble or tilt installation puts mirror in a vulnerable position.

·In case of fall and damage to the mirror, please unplug the power and contact your local supplier immediately.

·Unplug the mirror before you clean it. Use soft and dry cloth to wipe it clean. Do not use any chemical solution
on the mirror surface for it might erode the mirror.

Warning- In case of fire, please keep the mirror away from candles or any other fire or heat.

Quick Guide

1

Installation

2

Dimension

3

4

Network

5

Others

6

01

02~07

08~09

10

11-12

13

14

INDEX

01

Standard LOONA Mirror package contains items as below. Please contact your local

mirror on color or shape because of customization or model.

Package

LOONA Mirror*1

Setscrew * 4
Dilating screw * 4

Wall bracket * 1Power adapter * 1
3M adhesive tape

User Manual * 1

Leather Band * 1 Wall anchor *1

Front View

LOONA Introduction

Adding display, sensor and a s mart solution to a t raditio nal li ghted mirror,
LOONA brings a new way for people to entertain in front of a mirror. It helps to
build a smart home system for kitchen and bathr oom. Open system offe rs a
comprehensive platform for home automation.

Mirror panel

Display area(13.3")

Touch screen area

1 Quick Guide

0302

Indicator light

Standly: blue
ON: disappear

Motion Sensor(20~80cm)

Back View Quick Guide

1、Start up & Shut down

① Start up: Press ON/OFF(touch) button on the back side of the mirror for 2 seconds,

LOONA will boot up until homepage appears.

Start up LOGO screen

2 sec

Press for

③ Display ON/OFF: When LOONA is ON and at home page, tap TWICE on screen will turn off the display,

tap ONCE to wake up the display.

LOONA home page

Touch screen

Screen ON

Tap ONCE

Screen OFF

Tap TWICE

② Shut down: Press ON/OFF(touch) button on the back side of the mirror for 10 seconds,

LOONA will shut down.

Shut down

10 sec

Press for

Firmware updatePower input Storage input

Bracket

3M adhesive tape

Wall Anchor

MIC input

Leather band

Speaker

ON/OFF(touch key)

Power adapter

Interface

0504

DC 12V OTG USB

Quick Guide Quick Guide

3、WLAN network setting

Run Mirror Master App, enter home page>setting>WLAN>ON, enter Wi-Fi password. Once connected,
there'll be a pop up message on screen.

Mirror Master

WLAN

Home page

2、Motion Sensor

When LOONA is on standby, it'll turn on the screen when the motion sensor detects a
person is approaching. LOONA will turn OFF the display after 3 minutes if not in use. Screen
timer can be set by users.

Ideal detection range
20~80cm

Motion sensor demonstration

Motion sensor

0706

6、Connect to external smart devices

Different smart devices work with mirror through different protocols, LOONA
supports Wifi, ZigBee and blue tooth. Refer to smart device user manual for
demonstration.

4、Blue tooth

LOONA blue tooth is ON by default. Once external devices(Sleep monitor, Blood pressure monitor,
Blood sugar monitor and etc..) are ON, they will pair with LOONA automatically.

5、LED light control

On Mirror Master homepage, go to SETTING>turn ON/OFF the LED lighting.

Sleep monitor, Blood pressure
monitor, Blood sugar monitor, skin
monitor and etc..

Smart Devices

Mirror Master

Turn on or off

Homepage

Hang with Leather Band

to the Mirror,

2. Use Wall anchor set to nail 1*M8
screw to the wall,

3. Hang the mirror with leather band on
the wall anchor.

Hang on a smooth surface

1. Make sure the surface is clean and
dry, glue bracket to the surface.with
3M adhesive tape.

2. Take out wall bracket and 3M
adhesive tape from the package.
Clean the surface of your installation
spot. Stick the 3M adhesive tape onto
the bracket and place the bracket to
installation surface.

Wall mount installation

1. Fix bracket to the wall with 3
wall anchors & 3 set screws

2. Hang mirror on bracket

Installation Demonstration

Wall

Mirror

Wall or any smooth surface

Bracket

3M adhesive tape

Wall

3 Screwheads

Bracket

Wall

Mirror

wall anchor

Leather Band

2*M8 screws

During installation, be careful not to scratch the Mirror.Notes: Hang mirror to the bracket after 24 hours

Hang with Leather Band

Hang on a smooth surface

3M adhesive tape

setscrews *3

Wall anchor

Use 2*M6 screws

to the Mirror

Mirror back

Power cable

SCALE 1.000

S

C

ALE 1.00

0

S

CALE

1.000

Wall mount
installation

2

Installation

0908

Dimension/mm

If any discrepancy, please refer to current model.

363

500

23 13

Interfaces

DCIN
OTG
USB

1
1
1

Display

Display size
Display type
Display ratio
Resolution
Brightness
Contrast ratio
Viewing angle
Response time
Working life

13.3"
IPS
16:9
1920 x R.G.B x 1080
350 cd/m2 ( Original LED screen

)

1000:1( refer to actual model

)

178° (H) X 178°(V)(refer to

actual model)
16ms
≥20000 Hour

CPU
Frequency
GPU

RAM
ROM

Blue tooth
OS
Waterproof capacitive touch screen
Speaker
Power ON/OFF
Motion sensor
Zigbee Module

2GB
8GB(64G Optional )

2.4G/5G double frequency 802.11a/b/g/n
Blue tooth 3.0
Android 5.1.X

YES(10 points)
2*2 W
YES
YES(20~80cm)
Optional

Image processor

Rockchip 3288
Cortex A17 1.8GHz
Mali-T764

OPENGL ES1.1/2.0/3.0, OPEN VG1.1,
OPENCL, Directx11
2D/3D
4K, H.265 decoder

3

Dimension

4

Specification

1110

Power/Consumption

Working / Temperature & Humidity

Dimension/Material/Process

Power input
Consumption
Standby

Working humiture
Storage humiture

General size
Thickness
Mirror panel
Material
Waterproof

DC 12V 3A

≤ 36W
≤ 0.5W

0~45℃ /20-90%RH

-20~60℃ /5-90%RH

Φ500mm
36mm
Diamond level coated glass
Aluminum-alloy rim, plastic back
IP65

This is a comprehensive spec sheet, if any discrepancy,
please refer to actual model.

USB

Connect to power

Connect to USB drive

Insert USB drive or portable hard drive to
mirror through USB port

Note: Please do not insert USB to OTG.

Power cable

USB drive

Portable hard drive

Power socket(220V)

5

Connection

1312

SCALE 1.000

SCALE 1.000

USB

Notes

Troubleshooting

Couldn't start up LOONA mirror

No image/sound or bad display

1. Use only original power cable that comes with the Mirror.

2. Keep power cable in good shape and condition.

3. In any case of malfunction, unplug the Mirror immediately.

4. Unplug the Mirror if you won't be using it for a long time.

In any case of malfunction, before sending the mirror for maintenance, please read the
following instructions and solution.

Troubleshooting is only for users who are facing major operating issues on the Mirror.
If users should have p roblems with specific functional page, please go to your retailer to
get user manuals on specific functions.

1. Check if power jack is loose.

1. Make sure settings are properly adjusted.

2. Call your supplier or this service number 4008 852 258

6

Others

14

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance
could void the users’ authority to operate the equipment.

3. To comply with FCC RF exposure compliance requirements, a separation distance of at least
20 cm must be maintained between the antenna of this device and all persons.

4. This Transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter

FCC Caution

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.