Raypak Raytherm 4001, Raytherm 2100 User Manual

Job:
Engineer:
Contractor:
Prepared By: Date:

Versatile

Suitable for use with hydronic heating
boilers and hot water heaters

Permits sidewall venting
Allows use of smaller diameter vent pipe

Efficient

Maintains thermal efficiency of 82%
on all appliance sizes

Power Vent

For Raytherm

®

Models 2100-4001

Features

 Induced draft
 Plenum sized for appliance capacity
 Pre-wired and shipped loose for field mounting
 Air flow proving switch, mounted and wired
 Fan motor relay, mounted and wired
 Heavy-duty galvanized steel cabinet
 Polytuf powder coat finish
 Indoor construction
 Easy installation
 Limited one-year warranty
 Shipped loose for field mounting

Catalog No.: 1000.96B Effective: 11-15-07 Replaces: 10-15-01

Power Vent

For Raytherm 2100 - 4001 Model

Raytherm

Model

2100 2100 20 60 16-7/8 22-3/8 33-1/2 17-1/4 7-11/16 14 115 7.2 1/2 1900
2500 2499 20 60 16-7/8 22-3/8 33-1/2 21-3/4 12-3/16 14 115 7.2 1/2 1900
3001 3000 20 60 24-1/4 27-3/8 44-3/4 23-5/8 10-1/8 16 115 10.7 3/4 3400
3500 3500 20 60 24-1/4 27-3/8 44-3/4 29-1/4 15-3/4 16 115 10.7 3/4 3400
4001 4000 20 60 24-1/4 27-3/8 44-3/4 34-7/8 21-3/8 18 115 10.7 3/4 3400

MBTU

Max. Runt (ft.) Dimensions Electrical Ratings

Vert. Horiz. A B C E F K Volts Amps HP

Max. CFM

@ 70°F

Notes: 1. Vent pipe sizes are based on standard horizontal discharge with maximum sixty feet of horizontal length with

no elbows, 300°F nominal flue temperature, and sea-level operation. (Allow 10 ft. equivalent length
adjustment for each 90° elbow.) For installation under other conditions, please consult the factory.

2. Left discharge is standard.

3. Vent pipe must meet Category III appliance venting requirements.

4. Follow installation instructions provided by power vent manufacturer.

Raypak, Inc.  2151 Eastman Avenue, Oxnard, CA 93030  [phone]  Fax [phone]  www.raypak.com

Catalog No.: 1000.96B Effective: 11-15-07 Replaces: 10-15-01