Absolutely minimize your commercial or multi-family water heating
costs by adjusting water temperature to demand with the RayTemp
system.
¤
Energy Management Control
By
The Objective
The Approach
The Result
Combine RayTemp, an intelligent, demand-tracking, domestic water
energy management control, with energy-efficient Hi Delta or Raytherm
commercial water heaters, and create THE RAYTEMP SYSTEM.
This microprocessor-based control is available factory-mounted and
-wired in Hi Delta units. It is also available for remote-mounting in
single or multiple Hi Delta or Raytherm systems. No more contractors
mis-wiring controls. No finger-pointing between the plumbing and
control installers. With the complete RayTemp system, you have singlesource accountability!
The Solution
Save money every day when there is a demand for hot water. The
approach is simple: only heat the water to the peak demand temperature
when the demand requires it! The
execution is even better: the
RayTemp control will monitor daily
and weekly hot water usage, and
modify the supply water
temperature based upon the most
recent history. All unnecessary
standby losses, (the biggest
contributor to energy waste),
are eliminated.
Each RAYTEMP
SYSTEM is its own,
self-contained,
energy management
system for domestic
water!
Hi Delta heater with factory
mounted RayTemp control
RAYTEMP
RAYTEMP
energy-saving
water heater system
TM
The Control
Features
• Simple operation
• Factory-installed on
Hi Delta heaters
• Also available for remote
mounting with Hi Delta
and Raytherm
• Data logging
•Modem capability
• Multi-stage capability
• Fail-safe operation
•Will control multiple heaters
(up to four stages)
+
_
WINDOW FIELD VALUE
®
Energy Management Control
By
RayTemp energy-saving water heater system
The Heater
Features
• Ultra-low NOx
• 85% GPH recovery ANSI Z21.10.3
• Operating indicator LEDs
• Internal diagnostics
• Hot-Surface Ignition
• Small vent sizes
•Vertical or horizontal venting
• Extractor not needed for
horizontal venting (60 feet)
• 20-year warranty against
thermal shock
• Stage-firing
•Stackable; Small footprint
RAYPAK CORPORATE OFFICE AND PRINCIPAL MANUFACTURING FACILITY
2151 Eastman Avenue • Oxnard, CA 93030 805-278-5300 • Fax 800-872-9725 • www.raypak.com
RAYPAK CANADA LIMITED
2805 Slough St., Mississauga • Ontario, Canada L4T 1G2 • 905-677-7999 • Fax 905-677-8036
Catalog No.: 5100.18A Effective: 10-15-04 Replaces: 05-01-01 Litho in U.S.A. ©2001 Raypak, Inc. Raypak, Inc. reserves the right to make product changes or improvements at any time without notice.
A typical hot
water supply
system has to
always be ready
for a full draw
because it never
knows when the
demand will be.
A RayTemp system
knows when the
demand will be
high and adjusts
the system
standby for the
peak periods and
conserves during
the off periods.