Raypak 1262A User Manual

POOL HEATING

300,000 TO 2,340,000 BTUH INPUT

INDOOR/OUTDOOR
MULTI-STAGE FIRING

HI DELTA

• Efficiency: 85% standard; 98% with optional

condensing heat exchanger (CHX) (See catalog no.

1000.17)

• 105ºF minimum inlet water capability

• Patent-pending security blanket enhances staged

combustion, minimizes installation and start-up
issues, and protects burners from metal fatigue

• Externally visible status display lights and internal

diagnostic lights for easy troubleshooting

• Hot-surface ignition with remote flame sensing for

maximum reliability and safety

• Most serviceable pool heater in the industry; Front

access to all electrical components, heat
exchanger, ignition components, gas train, etc.

• Ducted-in-combustion-air ready using factory

supplied filter and frame

• TruSeal™ CSA direct-vent option available

• Compliant with all current NOx emission

requirements

• All cupro-nickel/bronze heat exchanger

• Sidewall venting ready; No extractor needed for

most applications

• Stackable without any offset utilizing Raypak’s

certified seismic rack kits

• Top or rear venting

1. Aesthetic improvement - Flush screws, color-matched
to cabinet

2. Smaller cabinet - 41-1/2” high by 32-3/4” deep ­Models 992A-2342A

3. Rugged cleanable filter - Filter location and material
improved for service and longevity

4. One-piece top - Inherently water-resistant; Sloped (1º)
for proper drainage to back of unit

5. Gas manifold grommet(s) - Easier to service; No
Mastik required

6. No wire nuts - All wire-harnessed factory connections
for maximum reliability and simple troubleshooting

7. Gasketed flue collar seal - Easy reversal for top/back
venting

8. Internal vent “T” - Vent “T” with silicone gaskets
provides a clean appearance and reliable seal; No RTV
required

9. Simplified CPW Board - Fewer versions, easy access
and dedicated plugs to prevent mis-wiring

10. Economaster - Standard energy-saver on all Raypak
commercial pool heaters

11. Reinforced top - Ribs across length of cabinet prevent
distortion

12. Reversible gas, water and ducting - Easily changed in
field from left-hand to right-hand side

13. Reversible combustion air - Easily changed in field
from left-hand to right-hand side

14. Service panels for HSI/flame sensor - Easy inspection,
service and replacement

15. Cold Run - Proprietary system that prevents
condensation in continuous low-temperature
operation

Model

No.

MBTUH

Input

MBTUH Output

Shipping

Weight (lbs.)

85% 98%*

302A 300 255 294 380

402A 399 339 391 445

502A 500 425 490 545

652A 650 553 637 590

752A 750 638 735 675

902A 900 765 882 740

Model

No.

MBTUH

Input

MBTUH Output

Shipping

Weight (lbs.)

85% 98%*

992A 990 842 970 900

1262A 1260 1071 1235 1010

1532A 1530 1301 1499 1225

1802A 1800 1530 1764 1350

2002A 1999 1699 1959 1450

2072A 2070 1760 2029 1450

2342A 2340 1989 2293 1520

* With CHX option (See Catalog No. 1000.17)

POOL HEATING

Catalog No.: 6000.27A Effective: 06-01-05 Replaces: 02-01-05

Raypak, Inc. reserves the right to make product changes

or improvements at any time without notice.

©2005 Raypak, Inc.

Raypak Inc.

2151 Eastman Ave.

Oxnard, CA 93030

[phone]

Fax [phone]

www.raypak.com

Raypak Canada Limited

2805 Slough St., Mississauga

Ontario, Canada L4T 1G2

[phone]

Fax [phone]

www.raypakcanada.com

ALL NEW 2005 HI DELTA

3456 7891011 1213

2

1

14

15