Energy Pro Series
WW W.RAYNORGAM ING.CO M
Energy Pro Series
X5 X1
I
Armrest Screws
(1/4x1-1/8", Yellow) X 8
Seat Post
E
G
X1
X1
Seat Cushion
with MechanismX1
X1
H
J
Armrest Washer
(16.5x8.5x1mm) X 8
K
Backrest Screws
(M8x22mm, Blue) X 4
Backrest Screw Caps
X 4
Allen Wrench (5mm) X 1
Energy Pro Series
Press th e Casters (A) i nto the h ole at th e e nd
of each leg of the B ase (B) .
Insert Seat Po st (C) in to the ce nter ho le of the
Base (B).
I
J
Please be careful to us e the cor rect
YELLO W Screw s (I) and Wash ers (J) .
For easy assembly, pla ce the Se at Cush ion(D )
face down on a flat surface. Attach the Armrest
(F) to th e Seat Cu shion ( D) using 8 Screws (I)
and 8 Washer s (J). Tig hten se curel y with th e
enclosed Allen Wrenc h (H).
Tur n the ass emble d seat up right a nd loca te
the center hole of the Me chanism over the
seat post. Pus h down firmly until the
connection is secure.
E
With th e two upr ight ba rs pointing straight up,
lower the backrest (E) onto th e two upright
bars so they slide into the holes on each side
of the ba ckrest. Push d own until the
connection is secure.
E
G
K
Please be careful to us e the cor rect BL UE
Screws (K) and Backrest Screw Caps (G).
Insert 4 Screw s (K) int o the pre drilled holes as
shown in the diagram above. Tighten securely
with th e enclosed Allen Wrenc h (H).
Insert 1 Backr est Scr ew Caps (G) over e ach of
the 4 scr ews on th e Backrest to co ver the
exposed holes of the Backrest (E).
OPERATING INSTRUCTIONS
Energy Pro Series
4
Pull the lever at side of the chair to
select a suitable and comfortable
angle and let go the lever to lock.
The recline range is approximately
85°-145°.
OPERATING INSTRUCTIONS
Energy Pro Series
F
ARM HEIGHT ADJUSTMENT
ARM PADS WIDTH
H
ADJUSTMENT
ARM PADS SLIDE
G
FORWARD & BACKWARD
ARM PADS ROTATE IN &
I
OUT
F ARM HEIGHT ADJUSTMENT
Pull the button on the armrest to
adjust height of the arm. The arm
height adjustment range is
approximately 3".
G ARM PADS SLIDE FORWARD
& BACKWARD
You can have arm pads slide forward
and backward. The arm pads slide
range is approximately each 1" for
front and back.
H ARM PADS WIDTH ADJUSTMENT
Press the button at inner side of the
arm pads and pull the arm pads in
horizontal direction. The arm pads
width adjustment range is
approximately 0.5".
I ARM PADS ROTATE IN & OUT
Rotate the arm pads to have arm pads
rotate in and out. The range of motion
in degree is approximately 12° for each
left and right.
Loading...