Raymond weil NABUCCO SELF-WINDING CHRONOGRAPH User Manual
RAYMOND WEIL S.A.
Avenue Eugène-Lance 36-38
P.O. Box 1569
1211 Geneva 26
Switzerland
Tel: +41 (0) 22 884 00 55
Fax: +41 (0) 22 884 00 50
GENERAL INFORMATION
info@raymond-weil.ch
AFTER-SALES SERVICE
INSTRUCTIONS FOR USE
customer-service@raymond-weil.ch
WEBSITE
NABUCCO
www.raymondweil.com
SELF-WINDING CHRONOGRAPH
NABUCCO CHRONOGRAPH CHANGING THE DATE AND SETTING THE TIME CHANGING THE DATE USE OF THE CHRONOGRAPH
In order to adjust the date rapidly, unscrew the push-button
The chronograph function can only be used
DESCRIPTION OF THE DIAL 1 Screwed-down crown
at 10 o’clock by pulling it straight out and turning it anti-
when the crown is in position 1.
2 Manual winding position
clockwise. Then, press it until the required date appears in
WATCH HANDS
SECONDS
HAND
HOURS
HAND
MINUTES
HAND
PUSH-BUTTON A:
- START
- STOP
DATE SETTING
PUSH-BUTTON
3 Time-setting
Your RAYMOND WEIL
Nabucco
is fitted with a
screw-down crown. Before winding the watch or setting the
time, it is therefore necessary to unscrew the crown
by pulling it straight out and turning it anti-clockwise.
The crown will then be released by a spring.
1 2 3
the window at 4:30.
DATE-SETTING
PUSH-BUTTON
START
Press push-button A to activate the seconds
hand of the chronograph. If the timed activity
lasts longer than 60 seconds, the time elapsed
will appear progressively on the minutes counter
and on the hours counter.
STOP
Press push-button A a second time to stop the
A
PUSH-BUTTON B:
- ZERO RESET
CHRONOGRAPH HANDS
60 SECONDS
COUNTER
12 HOURS
COUNTER
30 MINUTES
COUNTER
DATE
SETTING THE TIME
In order to adjust the time, pull the crown out to position 3
and turn it forwards or backwards until the hands indicate
the desired time.
1 Screwed-down crown
2 Manual winding position
3 Time setting
The automatic date correction takes place as the hours
hand passes midnight. During this operation, your watch
will continue to function and so will not need to be reset.
Do not change the date when the watch is showing a time
between 10 pm and 2 am. The watch’s automatic datechange mechanism engages during this time period and
DATE
WINDOW
chronograph and obtain the time that has
elapsed (in hours, minutes and seconds).
By pressing push-button A again, timing is
restarted immediately. Thus you can measure
several consecutive time durations.
RESETTING TO ZERO
After having stopped the chronograph by
pushing on push-button A, press push-button B
in order to reset all the chronograph counters
to zero. Your watch is now ready to start
timing again.
A
After setting the time, always push the crown back in to
the movement could be damaged.
After completing this resetting, press lightly on
RAYMOND WEIL Nabucco chronograph is equipped with
position 1, in order to restart the hands and press lightly on
After completing these settings, press lightly on the crown,
the crown, while turning it clockwise, and screw
a tachometric scale, enabling the measurement of speed
the crown, while turning it clockwise, and screw it back in
while turning it clockwise, and screw it back in gently
it back in gently in order to preserve your
in km/h.
gently in order to preserve your watch’s water-resistance.
in order to preserve your watch’s water-resistance.
watch’s water-resistance.
B
Loading...